Date: Sat, 5 Apr 2003 22:07:21 -0500 From: "Matthew Emmerton" <matt@gsicomp.on.ca> To: "E. J. Cerejo" <ej.cerejo@laposte.net>, "Benedict Plante" <erythro73@SexMagnet.com> Cc: freebsd-questions@freebsd.org Subject: Re: PPPoE : User can't access while root can! Message-ID: <001401c2fbe9$a4557190$1200a8c0@gsicomp.on.ca> References: <20030405153843.10d7c6d7.erythro73@SexMagnet.com> <3E8F9689.302@laposte.net>
next in thread | previous in thread | raw e-mail | index | archive | help
The error message in the ppp.log file indicates that ppp is attempting to negotiate an IPv6 address with Sympatico, which it refuses. How do you configure your vr0 interface in /etc/rc.conf? -- Matt Emmerton ----- Original Message ----- From: "E. J. Cerejo" <ej.cerejo@laposte.net> To: "Benedict Plante" <erythro73@SexMagnet.com> Cc: <freebsd-questions@freebsd.org> Sent: Saturday, April 05, 2003 9:52 PM Subject: Re: PPPoE : User can't access while root can! > You need to edit /etc/group file and make every user member of the > network group I believe. > The line that you looking for on this file should look like this: > > network:*:69:root,webdude,webdude2,webdude3 > > separate user by commons and no spaces. > > > Benedict Plante wrote: > > Hello all! > > Well, let get straight to the point. I use Bell Canada Sympatico Internet Service Provider, with a DSL connection, and I'm using FreeBSD-4.8-release. > > > > I've used FreeBSD-4.7 for a while, and sometime, when I installed, ppp wasn't working for user... unless one time, when I completely wipe my FreeBSD-4.7 partition and reinstalling it, it worked. Later, I deinstalled it and reinstalled it completely and it wasn't working. > > > > Now, I've move to FreeBSD-4.8-release and its still not working! I mean... it does work as root but not as a user. > > > > If I use internet with a user from the wheel group, it gives me that message: > > > > $ ping www.google.ca > > ping: cannot resolve www.google.ca: Host name lookup failure > > > > In order to make my connection work, I need to configure my /etc/ppp/ppp.conf along with rp-pppoe-3.5. > > > > -----Here is my /etc/ppp/ppp.conf: > > > > default: > > set log Phase tun command > > set ifaddr 10.0.0.1/0 10.0.0.2/0 > > > > sympatico.ca: > > set device PPPoE:vr0 > > set authname * > > set authkey * > > set dial > > set login > > add default HISADDR > > > > > > > > -----Here is my /etc/rc.conf: > > > > hostname="FreeBSD" > > kern_securelevel_enable="NO" > > linux_enable="YES" > > moused_enable="YES" > > moused_port="/dev/psm0" > > moused_type="auto" > > nfs_reserved_port_only="YES" > > sendmail_enable="YES" > > sshd_enable="YES" > > usbd_enable="YES" > > ppp_enable="YES" > > ppp_mode="ddial" > > ppp_profile="sympatico.ca" > > ppp_nat="YES" #I tried with it turned to "NO" also > > inetd_enable="YES" > > > > > > -----Here is my /var/log/ppp.log: > > > > 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "62031100098933-") > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SESSIONID > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Received NGM_PPPOE_SUCCESS > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: carrier -> login > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: login -> lcp > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492 > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: bundle: Authenticate > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: deflink: his = PAP, mine = none > > Apr 5 15:24:53 FreeBSD ppp[53]: tun0: Phase: Pap Output: *** ******** > > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: Pap Input: SUCCESS () > > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: lcp -> open > > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: bundle: Network > > Apr 5 15:24:54 FreeBSD ppp[53]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP ! > > Apr 5 15:25:06 FreeBSD last message repeated 5 times > > > > > > > > > > > > -----My ifconfig as root (working) > > FreeBSD# ifconfig > > vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1 > > ether 00:50:ba:e5:bd:b0 > > media: Ethernet autoselect (10baseT/UTP) > > status: active > > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > > faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > > inet 127.0.0.1 netmask 0xff000000 > > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > > tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 > > inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff > > Opened by PID 53 > > > > > > > > -----My ifconfig as user (wheel): > > > > $ ifconfig > > vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet6 fe80::250:baff:fee5:bdb0%vr0 prefixlen 64 scopeid 0x1 > > ether 00:50:ba:e5:bd:b0 > > media: Ethernet autoselect (10baseT/UTP) > > status: active > > lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 > > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > > faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > > inet 127.0.0.1 netmask 0xff000000 > > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > > tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 > > inet 64.228.205.31 --> 64.228.205.1 netmask 0xffffffff > > Opened by PID 53 > > > > > > > > > > ----- Do you need some more info??? Thank you to all the people who will help me :). > > > > Erythro73 > > > > > > > > > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001401c2fbe9$a4557190$1200a8c0>