Date: Tue, 24 Oct 2006 15:36:23 -0700 (PDT) From: Mark Busby <redtick@sbcglobal.net> To: usleepless@gmail.com Cc: freeb list <freebsd-multimedia@freebsd.org> Subject: Re: pvrxxx msg Message-ID: <20061024223623.89109.qmail@web81210.mail.mud.yahoo.com> In-Reply-To: <c39ec84c0610241345o1e6ba781k5c020c3352106403@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Bingo, I think that did it. Thanks for your time and work. load msg. kernel: cxm0: <Conexant iTVC16 MPEG Coder> mem 0xc8000000-0xcbffffff irq 17 a kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only kernel: tuner code 99 kernel: tuner_type = 20 kernel: cxm0: TCL 2002N-6A tuner kernel: <2>cxm 0-0000: loaded /lib/modules/v4l-cx25840.fw firmware (14264 byt kernel: <2>cxm debug 0-0000: decoder set input (0) kernel: <2>cxm debug 0-0000: now setting Tuner input kernel: <2>cxm debug 0-0000: set audio input (0) kernel: <2>cxm debug 0-0000: set audio input (0) kernel: cxm0: Eeprom NTSC kernel: <2>tda 0-0000: switching to v4l2 kernel: <2>tda 0-0000: configure for: NTSC-M kernel: <2>tda 0-0000: writing: b=0xd4 c=0x30 e=0x44 kernel: could not start iic bus kernel: probed 54 kernel: probed 136 kernel: probed 160 kernel: probed 194 kernel: <2>tda 0-0000: i2c i/o error: rc == 2 (should be 4) kernel: read error kernel: <2>tda 0-0000: i2c i/o error: rc == -577447141 (should be 1) kernel: <2>tda 0-0000: read: 0x 0 kernel: <2>tda 0-0000: after power on : no kernel: <2>tda 0-0000: afc : - 12.5 kHz kernel: <2>tda 0-0000: fmif level : low kernel: <2>tda 0-0000: afc window : out kernel: <2>tda 0-0000: vfi level : low kernel: <2>cxm 0-0000: Video signal: not present kernel: <2>cxm 0-0000: Detected format: NTSC-M kernel: <2>cxm 0-0000: Detected audio mode: mono kernel: <2>cxm 0-0000: Detected audio standard: BTSC kernel: <2>cxm 0-0000: Audio muted: no kernel: <2>cxm 0-0000: Audio microcontroller: running kernel: <2>cxm 0-0000: Configured audio standard: automatic detection kernel: <2>cxm 0-0000: Configured audio system: BTSC kernel: <2>cxm 0-0000: Specified standard: NTSC-M kernel: <2>cxm 0-0000: Specified input: Tuner kernel: <2>cxm 0-0000: Specified audio input: Tuner kernel: <2>cxm 0-0000: Specified audioclock freq: 48 kHz kernel: <2>cxm 0-0000: Preferred audio mode: stereo kernel: cxm0: [GIANT-LOCKED] kernel: cxm0: encoder firmware version 0x2050032 --- usleepless@gmail.com wrote: > Mark, > > the good news is: you have installed the driver > correctly. > > now we will fix your tuner. > > On 10/24/06, Mark Busby <redtick@sbcglobal.net> > wrote: > > sorry, I was using tail. > > Oct 24 14:04:56 saturn kernel: cxm0: <Conexant > iTVC16 > > MPEG Coder> mem 0xc8000000-0xcbffffff irq 17 a > > Oct 24 14:04:56 saturn kernel: cxm_iic0: <Conexant > > iTVC15 / iTVC16 I2C controller> on cxm0 > > Oct 24 14:04:56 saturn kernel: iicbb0: <I2C > > bit-banging driver> on cxm_iic0 > > Oct 24 14:04:56 saturn kernel: iicbus0: <Philips > I2C > > bus> on iicbb0 master-only > > Oct 24 14:04:56 saturn kernel: tuner code 99 > > Oct 24 14:04:56 saturn kernel: cxm0: unknown tuner > > code 0x63 > > Oct 24 14:04:56 saturn kernel: tuner_type = -1 > > Oct 24 14:04:56 saturn kernel: cxm0: could not > > initialize tuner > > Oct 24 14:04:56 saturn kernel: iicbus0: detached > > Oct 24 14:04:56 saturn kernel: iicbb0: detached > > Oct 24 14:04:56 saturn kernel: cxm_iic0: detached > > Oct 24 14:04:56 saturn kernel: device_attach: cxm0 > > attach returned 6 > > > > It's a Hauppauge WinTV PVR 150. > > I'm going to deinstall & clean the /usr/src and > try > > from scratch again. Could be a bad patch, I hope. > > are you able to edit c-source? > > 1. cd to /usr/ports/multimedia/pvrxxx > 2. rm work/.build<TAB> > 3. vi work/dev/cxm/cxm_eeprom.c > 4. search for "TCL" and make it look like this: > case 0x63: > case 0x55: /* TCL 2002N-6A */ > 5. make reinstall -DFORCE_PKG_REGISTER > > and reload the module. > > let me/us know. > > actually your tuner was reported as missing from the > driver earlier: > it is time for an update for the port. > > regards, > > usleep >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061024223623.89109.qmail>