Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 9 Apr 2002 13:55:20 -0700
From:      "Eric Brueggmann" <eric.brueggmann@amd.com>
To:        freebsd-sparc@freebsd.org
Subject:   FBSD on a U2
Message-ID:  <20020409135520.A2660@hotline.amd.com>

next in thread | raw e-mail | index | archive | help
Hello, I'm not sure if this (or current) is the best place to post this..

I downloaded the 5.0-DP1 today and tried to boot it up on an U2, I got the
following from console.  If I have some time, I'll try it again with just one
CPU in the box.

							Eric

send BREAK? type 'YES' to confirm: YES
[BREAK]
/
{0} ok boot cdrom
Boot device: /sbus/SUNW,fas@e,8800000/sd@6,0:f  File and args:        
 
>> FreeBSD/sparc64 boot block
   Boot path:   /sbus@1f,0/SUNW,fas@e,8800000/sd@6,0:f
   Boot loader: /boot/loader
Console: OpenFirmware console
disk0 is /sbus@1f,0/SUNW,fas@e,8800000/sd@6
FreeBSD/sparc64 loader
bootpath="/sbus@1f,0/SUNW,fas@e,8800000/sd@6,0:f"
loaddev=disk0s0a:
> set boot_cdrom=yes

/boot/kernel/kernel data=0x1fff08+0xe44d8 syms=[0x8+0x3c240+0x8+0x2fced]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...               
nothing to autoload yet.
jumping to kernel entry at 0x80030000.
stray vector interrupt 2033
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Mon Mar 18 02:31:18 GMT 2002
    root@u60.locore.ca:/usr/p4/sparc64/sys/sparc64/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0x80354000.
Timecounter "tick"  frequency 200000000 Hz
cpu0: Sun Microsystems UltraSparc-I Processor (200.00 MHZ CPU)
cpu1: Sun Microsystems UltraSparc-I Processor (200.00 MHZ CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
nexus0: <OpenFirmware Nexus device>
sbus0: clock 25.000 MHz
DVMA map: ff800000 to ffffffff
initialializing counter-timer
Timecounter "counter-timer"  frequency 1000000 Hz
sbus0: <U2S UPA-SBus bridge> on nexus0
sbus0: <SUNW,CS4231>, type (unknown) (no driver attached)
sbus0: <auxio>, type (unknown) (no driver attached)
sbus0: <flashprom>, type (unknown) (no driver attached)
sbus0: <SUNW,fdtwo>, type block (no driver attached)
eeprom0: <SBus EEPROM/clock> mem 0x1200000-0x1201fff on sbus0
eeprom0: model mk48t59
eeprom0: hostid 80827bbd
sbus0: <zs>, type serial (no driver attached)
sbus0: <zs>, type serial (no driver attached)
sbus0: <sc>, type (unknown) (no driver attached)
sbus0: <SUNW,pll>, type (unknown) (no driver attached)
sbus0: <SUNW,fas>, type scsi (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8c07000-0x8c0701f,0x8c06000-0x8c07fff,0x8c04000-0x8c05fff,0x8c02000-0x8c03fff,0x8c00000-0x8c00107 irq 2017 on sbus0
hme0: Ethernet address: 08:00:20:82:7b:bd
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sbus0: <SUNW,bpp>, type (unknown) (no driver attached)
sbus0: <cgsix>, type display (no driver attached)
SMP: AP CPU #1 Launched!
Stopped at      cpu_switch+0x5b4:       restore         %g0, %g0, %g0
db> 





To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020409135520.A2660>