Date: Tue, 6 Aug 2002 15:57:56 +0800 From: Mars G Miro <mars@cannoncreek.com> To: freebsd-stable@freebsd.org Subject: dc0+Jet601TCF on 4.5R, 4.6.1R-p10 woes Message-ID: <02080615575600.58661@hellraiser.cannoncreek.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
YO List!
I do not know if this is really a problem with the dc driver or not but here
goes:
Machine:
Celeron 1.1Ghz
Jet 601TCF mobo
256MB RAM
80Gb HD
Davicom DM9102AF
4.4R, 4.4R-p23 works flawlessly on the machine, NO network problems
whatsoever of any kind.
4.5R, 4.6.1R-p10 HAS network problems like:
* Can't seem to see the network , pinging another machine on the same
network is futile, but it does seem to see bits of packets across the wire,
I've verified this with tcpdump.
* It would take a few minutes after the dc interface is up; to make the
machine respond to icmp requests from another machine on the same network,
but oddly pinging another machine (from the console of the machine itself) on
the same network doesn't really work.
I thought it was the machine that was b0rky, but I've tried the same setup
on an identical machine (just 128Mb RAM, 40GBHD) and another Davicom NIC with
the same results as above, 4.4R, 4.4R-p23 WORKs but NOT 4.5R-4.6.1R-p10 !
For some reason booting verbosely (on 4.6.1R-p10) can't get it past after
typing in "boot kernel -v", doesn't hang (numlock still responds) but it just
stays in that state. I've attached the dmesg anyways (some info obscured,
sorry).
ifconfig on 4.6.1R-p10 says it's active (is it really?):
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.10 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::208:a1ff:fe25:8bef%dc0 prefixlen 64 scopeid 0x2
ether 00:08:a1:25:8b:ef
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Currently the machine's at 4.6.1R-p10 w/ a 10Mbps Realtek card, so it sees
the network.
I believe this problem manifests with the Jet601TCF mobo and Davicom NICs. I
have a Davicom NIC at home on an P4 1.6Ghz CPU on an Intel 850MV mobo and no
network problems whatsoever.
The Jet601TCF mobo has a Via VTC686b chipset (yeah, I've read about the 686
bugs). The BIOS version is their latest, 4/08/2002 accdg. to
http://www.jetway.com.tw/evisn/download/bios/index-1.htm .
I'm willing to give SSH access to the machine, if anyone's interested in
having a look, before I'd commision it for production (and change NICs if the
Davicom won't work).
cheers
mars
--
There's a long-standing bug relating to the x86 architecture that
allows you to install Windows.
-- Matthew D. Fuller
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6.1-RELEASE-p10 #0: Tue Aug 6 13:47:29 PHT 2002
root@XXXXXXXXXXXXXXX:/usr/src/sys/compile/PROMETHEUS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1102.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 266272768 (260032K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 255868928 (249872K bytes)
Preloaded elf kernel "kernel" at 0xc034c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc034c09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00fdaf0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=8601)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xc000-0xc00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 7.2 irq 12
pci0: <VIA 83C572 USB controller> at 7.3 irq 12
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
chip1: <VIA 82C686 AC97 Audio> port 0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff irq 5 at device 7.5 on pci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xdc00-0xdc1f irq 10 at device 8.0 on pci0
ed0: address 00:00:e8:8e:f0:17, type NE2000 (16 bit)
dc0: <Davicom DM9102A 10/100BaseTX> port 0xe000-0xe0ff mem 0xec000000-0xec0000ff irq 11 at device 9.0 on pci0
dc0: Ethernet address: 00:08:a1:25:8b:ef
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA100
acd0: CDROM <CD-S520/A> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
swapon: adding /dev/ad0s1b as swap device
Automatic boot in progress...
/dev/ad0s1a:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a:
clean, 165207 free
(415 frags, 20599 blocks, 0.2% fragmentation)
/dev/ad0s1f:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f:
clean, 201357 free
(21 frags, 25167 blocks, 0.0% fragmentation)
/dev/ad0s1g:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1g:
clean, 33249577 free
(53049 frags, 4149566 blocks, 0.2% fragmentation)
/dev/ad0s1e:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e:
clean, 1537492 free
(220 frags, 192159 blocks, 0.0% fragmentation)
Doing initial network setup:
hostname
.
ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet XXXXXXXXXXXXXXX netmask 0xffffff00 broadcast XXXXXXXXXXXXXX
inet6 fe80::200:e8ff:fe8e:f017%ed0 prefixlen 64 tentative scopeid 0x1
ether 00:00:e8:8e:f0:17
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet XXXXXXXXXXX netmask 0xffffffff broadcast XXXXXXXXXX
inet6 fe80::208:a1ff:fe25:8bef%dc0 prefixlen 64 tentative scopeid 0x2
ether 00:08:a1:25:8b:ef
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
add net default: gateway XXXXXXXXXXXXXXX
Additional routing options:
TCP keepalive=YES
.
Routing daemons:
.
Additional daemons:
syslogd
.
Doing additional network setup:
.
Starting final network daemons:
.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Starting standard daemons:
inetd
cron
sshd
sendmail
sendmail-clientmqueue
.
Initial rc.i386 initialization:
.
Configuring syscons:
font8x16
font8x8
blanktime
screensaver
.
Additional ABI support:
.
Local package initialization:
.
Additional TCP options:
.
Tue Aug 6 15:13:31 PHT 2002
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?02080615575600.58661>