From owner-freebsd-smp Tue Jul 23 21:44:15 2002 Delivered-To: freebsd-smp@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 99C6D37B400 for ; Tue, 23 Jul 2002 21:43:35 -0700 (PDT) Received: from hotmail.com (oe29.law9.hotmail.com [64.4.8.86]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8E7C443E3B for ; Tue, 23 Jul 2002 21:43:34 -0700 (PDT) (envelope-from devghost@hotmail.com) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 23 Jul 2002 21:43:34 -0700 X-Originating-IP: [66.130.112.2] From: "/Dev/Ghost" To: Subject: Unable to boot dual PII system Date: Wed, 24 Jul 2002 00:51:44 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0007_01C232AC.48122E70" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Message-ID: X-OriginalArrivalTime: 24 Jul 2002 04:43:34.0366 (UTC) FILETIME=[AB03B7E0:01C232CC] Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org This is a multi-part message in MIME format. ------=_NextPart_000_0007_01C232AC.48122E70 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello everyone ! I recently came across a acer altos 9100b, dual PII-400 with 1G ram. = I've decided to install FreeBSD 4.6 (ISO) on it to be my main server. = This is not my first FreeBSD install but it is the first on a = multi-processors machine. I compiled a new kernel ( un-commented both = SMP options, config, make, make install ) but now it refuses to boot. If = I boot with kernel.old it is ok ( dmesg ( boot -v ) and mptable at end = of message). With the SMP-kernel, just after the line that says: = "Waiting 15 seconds for SCSI devices to settle" I get the following = lines: SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(); lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: = 0x0000001ff and then the kernel deadlocks and I have to power-cycle it to try to = boot again. ( ctrl-alt-del or ^D or ^C does nothing) DMESG: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... TSC clock: 400948478 Hz, i8254 clock: 1193298 = Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x652 Stepping =3D 2 = Features=3D0x183fbff real memory =3D 1073741824 (1048576K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x004f7000 - 0x3fff7fff, 1068503040 bytes (260865 pages) avail memory =3D 1040207872 (1015828K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f0280 bios32: Entry =3D 0xf0210 (c00f0210) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0x0 pnpbios: Found PnP BIOS data at 0xc00f56f0 pnpbios: Entry =3D fa000:0 Rev =3D 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel.old" at 0xc04d0000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000384c pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there = (id=3D71928086) pcibios: No call entry point npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard found-> vendor=3D0x8086, dev=3D0x7192, revid=3D0x02 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[10]: type 1, range 32, base 00000000, size 28 found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 subordinatebus=3D0 secondarybus=3D0 found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01 class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel.old" at 0xc04d0000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000384c pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there = (id=3D71928086) pcibios: No call entry point npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard found-> vendor=3D0x8086, dev=3D0x7192, revid=3D0x02 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[10]: type 1, range 32, base 00000000, size 28 found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 subordinatebus=3D0 secondarybus=3D0 found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01 class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Dd, irq=3D255 found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x02 class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[90]: type 1, range 32, base 00000800, size 4 found-> vendor=3D0x1011, dev=3D0x0024, revid=3D0x03 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 subordinatebus=3D1 secondarybus=3D1 found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x02 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D10 map[10]: type 1, range 32, base 43500000, size 12 map[14]: type 1, range 32, base 0000ac00, size 5 map[18]: type 1, range 32, base 43200000, size 20 found-> vendor=3D0x1002, dev=3D0x5654, revid=3D0x40 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[10]: type 1, range 32, base 42000000, size 24 map[14]: type 1, range 32, base 0000a800, size 8 pci0: on pcib0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: at device 7.1 on pci0 atapci0: ATA channel disabled by BIOS uhci0: at device 7.2 on pci0 uhci0: Could not map ports device_probe_and_attach: uhci0 attach returned 6 chip1: port 0x800-0x80f at = device 7. 3 on pci0 pcib1: at device 15.0 on pci0 found-> vendor=3D0x9004, dev=3D0x8078, revid=3D0x01 class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D15 map[10]: type 1, range 32, base 00009400, size 8 map[14]: type 1, range 32, base 41100000, size 12 found-> vendor=3D0x9004, dev=3D0x8078, revid=3D0x01 class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D15 map[10]: type 1, range 32, base 00009800, size 8 map[14]: type 1, range 32, base 41101000, size 12 pci1: on pcib1 ahc0: port 0x9400-0x94ff mem = 0x41100000-0x4 1100fff irq 15 at device 6.0 on pci1 ahc0: Reading SEEPROM...done. ahc0: High byte termination Enabled ahc0: Downloading Sequencer Program... 431 instructions downloaded aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs ahc1: port 0x9800-0x98ff mem = 0x41101000-0x4 1101fff irq 15 at device 10.0 on pci1 ahc1: Reading SEEPROM...done. ahc1: High byte termination Enabled ahc1: Downloading Sequencer Program... 431 instructions downloaded using shared irq15. aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs fxp0: port 0xac00-0xac1f mem = 0x43200000-0x432f ffff,0x43500000-0x43500fff irq 10 at device 16.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:00:e2:20:56:55 fxp0: PCI IDs: 8086 1229 8086 0001 0002 fxp0: Dynamic Standby mode is disabled nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached pci0: (vendor=3D0x1002, = dev=3D0x5654) at 17.0 ex_isa_identify() Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0:
Hello everyone !
 
 I recently came across a acer = altos 9100b,=20 dual PII-400 with 1G ram. I've decided to install FreeBSD 4.6 = (ISO) on it=20 to be my main server. This is not my first FreeBSD install but it is the = first=20 on a multi-processors machine. I compiled a new kernel ( un-commented = both SMP=20 options, config, make, make install ) but now it refuses to boot. = If I boot=20 with kernel.old it is ok ( dmesg ( boot -v ) and mptable at = end of=20 message). With the SMP-kernel, just after the line that says: "Waiting = 15=20 seconds for SCSI devices to settle" I get the following = lines:
 
SMP: AP CPU #1 Launched!
SMP: CPU1 = apic_initialize();
     lint0: = 0x00010700 lint1:=20 0x00010400 TPR: 0x00000010 SVR: 0x0000001ff
 
and then the kernel deadlocks and I = have to=20 power-cycle it to try to boot again. ( ctrl-alt-del or ^D = or ^C does=20 nothing)
 
 
DMESG:
 
Copyright (c) 1992-2002 The FreeBSD=20 Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, = 1992, 1993,=20 1994
        The Regents of the = University=20 of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun = 11=20 06:14:12 GMT 2002
    murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Cal= ibrating=20 clock(s) ... TSC clock: 400948478 Hz, i8254 clock: 1193298=20 Hz
CLK_USE_I8254_CALIBRATION not specified - using default=20 frequency
Timecounter "i8254"  frequency 1193182=20 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration=20 method
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class=20 CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x652  = Stepping =3D=20 2
 =20 Features=3D0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real=20 memory  =3D 1073741824 (1048576K bytes)
Physical memory=20 chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 = pages)
0x004f7000 -=20 0x3fff7fff, 1068503040 bytes (260865 pages)
avail memory =3D = 1040207872=20 (1015828K bytes)
bios32: Found BIOS32 Service Directory header at=20 0xc00f0280
bios32: Entry =3D 0xf0210 (c00f0210)  Rev =3D 0  = Len =3D=20 1
pcibios: PCI BIOS entry at 0x0
pnpbios: Found PnP BIOS data at=20 0xc00f56f0
pnpbios: Entry =3D fa000:0  Rev =3D 1.0
Other BIOS = signatures=20 found:
ACPI: 00000000
Preloaded elf kernel "kernel.old" at=20 0xc04d0000.
Pentium Pro MTRR support enabled
md0: Malloc = disk
Creating=20 DISK md0
Math emulator present
pci_open(1):    mode = 1 addr=20 port (0x0cf8) is 0x8000384c
pci_open(1a):   = mode1res=3D0x80000000=20 (0x80000000)
pci_cfgcheck:   device 0 [class=3D060000] = [hdr=3D00] is=20 there (id=3D71928086)
pcibios: No call entry point
npx0: <math=20 processor> on motherboard
npx0: INT 16 interface
pcib0: = <Intel=20 82443BX host to PCI bridge (AGP disabled)> on = motherboard
found->=20 vendor=3D0x8086, dev=3D0x7192,=20 revid=3D0x02
        = class=3D06-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        map[10]: = type 1,=20 range 32, base 00000000, size 28
found-> vendor=3D0x8086, = dev=3D0x7110,=20 revid=3D0x02
        = class=3D06-01-00,=20 hdrtype=3D0x00, mfdev=3D1
       =20 subordinatebus=3D0       =20 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7111,=20 revid=3D0x01
        = class=3D01-01-80,=20 hdrtype=3D0x00, mfdev=3D0
Other BIOS signatures found:
ACPI:=20 00000000
Preloaded elf kernel "kernel.old" at 0xc04d0000.
Pentium = Pro MTRR=20 support enabled
md0: Malloc disk
Creating DISK md0
Math = emulator=20 present
pci_open(1):    mode 1 addr port (0x0cf8) is=20 0x8000384c
pci_open(1a):   mode1res=3D0x80000000=20 (0x80000000)
pci_cfgcheck:   device 0 [class=3D060000] = [hdr=3D00] is=20 there (id=3D71928086)
pcibios: No call entry point
npx0: <math=20 processor> on motherboard
npx0: INT 16 interface
pcib0: = <Intel=20 82443BX host to PCI bridge (AGP disabled)> on = motherboard
found->=20 vendor=3D0x8086, dev=3D0x7192,=20 revid=3D0x02
        = class=3D06-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        map[10]: = type 1,=20 range 32, base 00000000, size 28
found-> vendor=3D0x8086, = dev=3D0x7110,=20 revid=3D0x02
        = class=3D06-01-00,=20 hdrtype=3D0x00, mfdev=3D1
       =20 subordinatebus=3D0       =20 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7111,=20 revid=3D0x01
        = class=3D01-01-80,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7112,=20 revid=3D0x01
        = class=3D0c-03-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        = intpin=3Dd,=20 irq=3D255
found-> vendor=3D0x8086, dev=3D0x7113,=20 revid=3D0x02
        = class=3D06-80-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        map[90]: = type 1,=20 range 32, base 00000800, size  4
found-> vendor=3D0x1011, = dev=3D0x0024,=20 revid=3D0x03
        = class=3D06-04-00,=20 hdrtype=3D0x01, mfdev=3D0
       =20 subordinatebus=3D1       =20 secondarybus=3D1
found-> vendor=3D0x8086, dev=3D0x1229,=20 revid=3D0x02
        = class=3D02-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        = intpin=3Da,=20 irq=3D10
        map[10]: type 1, = range 32,=20 base 43500000, size 12
        = map[14]:=20 type 1, range 32, base 0000ac00, size =20 5
        map[18]: type 1, range = 32, base=20 43200000, size 20
found-> vendor=3D0x1002, dev=3D0x5654,=20 revid=3D0x40
        = class=3D03-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        map[10]: = type 1,=20 range 32, base 42000000, size = 24
       =20 map[14]: type 1, range 32, base 0000a800, size  8
pci0: <PCI = bus>=20 on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 = on=20 pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 = controller> at device 7.1 on pci0
atapci0: ATA channel disabled by = BIOS
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device = 7.2 on=20 pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 = attach=20 returned 6
chip1: <Intel 82371AB Power management controller> = port=20 0x800-0x80f at device 7.
3 on pci0
pcib1: <DEC 21152 PCI-PCI = bridge>=20 at device 15.0 on pci0
found-> vendor=3D0x9004, dev=3D0x8078,=20 revid=3D0x01
        = class=3D01-00-00,=20 hdrtype=3D0x00, mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        = intpin=3Da,=20 irq=3D15
        map[10]: type 1, = range 32,=20 base 00009400, size  = 8
       =20 map[14]: type 1, range 32, base 41100000, size 12
found-> = vendor=3D0x9004,=20 dev=3D0x8078, revid=3D0x01
        = class=3D01-00-00, hdrtype=3D0x00,=20 mfdev=3D0
       =20 subordinatebus=3D0       =20 secondarybus=3D0
        = intpin=3Da,=20 irq=3D15
        map[10]: type 1, = range 32,=20 base 00009800, size  = 8
       =20 map[14]: type 1, range 32, base 41101000, size 12
pci1: <PCI = bus> on=20 pcib1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port = 0x9400-0x94ff mem=20 0x41100000-0x4
1100fff irq 15 at device 6.0 on pci1
ahc0: Reading=20 SEEPROM...done.
ahc0: High byte termination Enabled
ahc0: = Downloading=20 Sequencer Program... 431 instructions downloaded
aic7880: Ultra Wide = Channel=20 A, SCSI Id=3D7, 16/253 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI = adapter>=20 port 0x9800-0x98ff mem 0x41101000-0x4
1101fff irq 15 at device 10.0 = on=20 pci1
ahc1: Reading SEEPROM...done.
ahc1: High byte termination=20 Enabled
ahc1: Downloading Sequencer Program... 431 instructions=20 downloaded
        using shared=20 irq15.
aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 = SCBs
fxp0:=20 <Intel Pro 10/100B/100+ Ethernet> port 0xac00-0xac1f mem=20 0x43200000-0x432f
ffff,0x43500000-0x43500fff irq 10 at device 16.0 on = pci0
fxp0: using memory space register mapping
fxp0: Ethernet = address=20 00:00:e2:20:56:55
fxp0: PCI IDs: 8086 1229 8086 0001 0002
fxp0: = Dynamic=20 Standby mode is disabled
nsphy0: <DP83840 10/100 media = interface> on=20 miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = auto
bpf: fxp0 attached
pci0: <ATI Mach64-VT graphics = accelerator>=20 (vendor=3D0x1002, dev=3D0x5654) at 17.0
ex_isa_identify()
Trying = Read_Port at=20 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying = Read_Port at=20 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying = Read_Port at=20 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP=20 devices
isa_probe_children: probing non-PnP devices
orm0: = <Option=20 ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe47ff,0xe4800-0xe4fff=20 on
isa0
fdc0: <NEC 72065B or clone> at port = 0x3f0-0x3f5,0x3f7 irq 6=20 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: = <1440-KB 3.5"=20 drive> on fdc0 drive 0
ata0: iobase=3D0x01f0 altiobase=3D0x03f6=20 bmaddr=3D0x0000
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on = isa0
ata1:=20 iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0x0000
ata1 at port = 0x170-0x177,0x376=20 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg = Test -=20 ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test = -=20 ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port = 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status = reg test=20 failed ff
aha0: status reg test failed ff
aha0: status reg test = failed=20 ff
aha0: status reg test failed ff
aha0: status reg test failed = ff
aha0=20 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at = port=20 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at = port=20 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on=20 atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: = keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 = (2),=20 config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: = <PS/2=20 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device = ID=20 4-00, 5 buttons
psm0: config:00000000, flags:00000000, packet = size:4
psm0:=20 syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port = 0x3c0-0x3df=20 iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5),=20 flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 = 0x20000
fb0:=20 init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 = size:32k=20 gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 = 00 00 03=20 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 = 1f=20 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 = 0f 08 00=20 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 = 10 00 10=20 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e = 8f 28 1f=20 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 = 0f 08 00=20 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode = 24
50 18 10=20 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 = 9c 8e 8f=20 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f = 0c 00 0f=20 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags = 0x100 on=20 isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, = kbd0,=20 terminal emulator: sc (syscons terminal)
pcic0 failed to probe at = port 0x3e0=20 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: = 0x41=20 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on = isa0
sio0:=20 type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port = 0x2f8-0x2ff=20 irq 3 on isa0
sio1: type 16550A
sio2: not probed = (disabled)
sio3: not=20 probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using = extended=20 I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port=20 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in = COMPATIBLE=20 mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0=20 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven=20 port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at = port=20 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port=20 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 = irq 10 on=20 isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 = failed to=20 probe at port 0x300-0x31f on isa0
sn0 failed to probe at port = 0x300-0x30f irq=20 10 on isa0
isa_probe_children: probing PnP devices
BIOS=20 Geometries:
 0:022afe3f 0..554=3D555 cylinders, 0..254=3D255 = heads, 1..63=3D63=20 sectors
 1:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 = heads, 1..63=3D63=20 sectors
 0 accounted for
Device configuration = finished.
bpf: lo0=20 attached
bpf: ppp0 attached
new masks: bio 68c040, tty 63109a, net = 67149a
bpf: sl0 attached
bpf: faith0 attached
Waiting 15 = seconds for=20 SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset = delivered. 0=20 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 = SCBs=20 aborted.
(probe5:ahc0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff=20 0
(probe5:ahc0:0:5:0): ILLEGAL REQUEST = asc:24,0
(probe5:ahc0:0:5:0):=20 Invalid field in CDB
(ahc0:A:5:0): Sending SDTR period c, offset=20 f
(ahc0:A:5:0): Received SDTR period c, offset=20 f
        Filtered to period c, = offset=20 f
ahc0: target 5 synchronous at 20.0MHz, offset =3D = 0xf
(ahc0:A:5:0):=20 Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, = offset=20 f
        Filtered to period c, = offset=20 f
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 = filtered to=20 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR = period=20 c, offset 8
(ahc0:A:0:0): Received SDTR period c, offset=20 8
        Filtered to period c, = offset=20 8
ahc0: target 0 synchronous at 20.0MHz, offset =3D = 0x8
(ahc0:A:1:0):=20 Sending WDTR 1
(ahc0:A:1:0): Received WDTR 1 filtered to 1
ahc0: = target 1=20 using 16bit transfers
(ahc0:A:1:0): Sending SDTR period c, offset=20 8
(ahc0:A:1:0): Received SDTR period c, offset=20 8
        Filtered to period c, = offset=20 8
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x8
Creating = DISK=20 da0
Creating DISK da1
Creating DISK cd0
pass0 at ahc0 bus 0 = target 0=20 lun 0
pass0: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2=20 device
pass0: Serial Number RD467983
pass0: 40.000MB/s transfers=20 (20.000MHz, offset 8, 16bit), Tagged Queueing Enable
d
pass1 at = ahc0 bus 0=20 target 1 lun 0
pass1: <IBM DDRS-39130W S97B> Fixed Direct = Access SCSI-2=20 device
pass1: Serial Number REG08270
pass1: 40.000MB/s transfers=20 (20.000MHz, offset 8, 16bit), Tagged Queueing Enable
d
pass2 at = ahc0 bus 0=20 target 5 lun 0
pass2: <NEC CD-ROM DRIVE:465 1.03> Removable = CD-ROM=20 SCSI-2 device
pass2: 20.000MB/s transfers (20.000MHz, offset=20 15)
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): = Received=20 SDTR period c, offset f
        = Filtered=20 to period c, offset f
Mounting root from = ufs:/dev/da0s1a
(ahc0:A:5:0):=20 Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, = offset=20 f
        Filtered to period c, = offset=20 f
(cd0:ahc0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 = 0=20 0
(cd0:ahc0:0:5:0): NOT READY asc:3a,0
(cd0:ahc0:0:5:0): Medium = not=20 present
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM = DRIVE:465=20 1.03> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers = (20.000MHz,=20 offset 15)
cd0: Attempt to query device size failed: NOT READY, = Medium not=20 present
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DDRS-39130W = S97B>=20 Fixed Direct Access SCSI-2 device
da1: Serial Number REG08270
da1: = 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing=20 Enabled
da1: 8715MB (17850000 512 byte sectors: 255H 63S/T = 1111C)
da0 at=20 ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560W S97B> Fixed = Direct=20 Access SCSI-2 device
da0: Serial Number RD467983
da0: 40.000MB/s = transfers=20 (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4357MB = (8925000=20 512 byte sectors: 255H 63S/T 555C)
da0s1: type 0xa5, start 63, end = =3D 8916074,=20 size 8916012 : OK
start_init: trying /sbin/init
da1s1: type 0xa5, = start=20 63, end =3D 17848214, size 17848152 : OK
da1s1: type 0xa5, start 63, = end =3D=20 17848214, size 17848152 : OK
splash: image decoder found: = logo_saver
Linux=20 ELF exec handler installed
MPTABLE:

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D
 
MPTable, version 2.0.15
 
--------------------------------------------------------------------= -----------
 
MP Floating Pointer Structure:
 
 =20 location:          &nbs= p;         =20 BIOS
  physical=20 address:           = ; =20 0x000f9e00
 =20 signature:          &nb= sp;        =20 '_MP_'
 =20 length:           =            =20 16 bytes
 =20 version:           = ;          =20 1.4
 =20 checksum:          &nbs= p;         =20 0xe3
 =20 mode:           &n= bsp;           &nb= sp;=20 Virtual Wire
 
--------------------------------------------------------------------= -----------
 
MP Config Table Header:
 
  physical=20 address:           = ; =20 0x000f9e10
 =20 signature:          &nb= sp;        =20 'PCMP'
  base table=20 length:           = =20 276
 =20 version:           = ;          =20 1.4
 =20 checksum:          &nbs= p;         =20 0xfd
  OEM=20 ID:           &nbs= p;          =20 'ACER    '
  Product=20 ID:           &nbs= p;      =20 'M9LD        '
  OEM table=20 pointer:           = ;=20 0x00000000
  OEM table=20 size:           &n= bsp;  =20 0
  entry=20 count:           &= nbsp;     =20 26
  local APIC=20 address:          =20 0xfee00000
  extended table=20 length:        0
  extended = table=20 checksum:      0
 
--------------------------------------------------------------------= -----------
 
MP Config Base Table Entries:
 
--
Processors:     APIC ID Version=20 State           = Family =20 Model   Step   =20 Flags
          &nbs= p;     =20 0       0x11    BSP,=20 usable     6      =20 5       = 2      =20 0x183fbff
          =       =20 1       0x11    AP,=20 usable      = 6      =20 5       = 2      =20 0x183fbff
--
Bus:        &n= bsp;  =20 Bus ID =20 Type
           = ;     =20 0      =20 PCI
           =      =20 1      =20 PCI
           =      =20 2       ISA
--
I/O=20 APICs:      APIC ID Version=20 State          =20 Address
          &n= bsp;     =20 2       0x11   =20 usable         =20 0xfec00000
--
I/O Ints:      =20 Type    Polarity   =20 Trigger     Bus ID   IRQ    = APIC ID=20 PIN#
           = ;    =20 INT     = active-hi       =20 edge        2     = 0          = 2   =20 0
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 1          = 2   =20 1
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 0          = 2   =20 2
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 3          = 2   =20 3
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 4          = 2   =20 4
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 5          = 2   =20 5
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 6          = 2   =20 6
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 7          = 2   =20 7
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 8          = 2   =20 8
           &n= bsp;   =20 INT     = active-hi       =20 edge        2     = 9          = 2   =20 9
           &n= bsp;   =20 INT     = active-hi      =20 level        2   =20 10          2  =20 10
           &= nbsp;   =20 INT     = active-hi       =20 edge        2   =20 11          2  =20 11
           &= nbsp;   =20 INT     = active-hi       =20 edge        2   =20 12          2  =20 12
           &= nbsp;   =20 INT     = active-hi       =20 edge        2   =20 14          2  =20 14
           &= nbsp;   =20 INT     = active-hi      =20 level        2   =20 15          2  =20 15
           &= nbsp;   =20 INT     = active-lo      =20 level        0 =20 16:A          2   = 19
           &= nbsp;   =20 INT     = active-lo      =20 level        1  =20 6:A          2  =20 22
           &= nbsp;   =20 INT     = active-lo      =20 level        1 =20 10:A          2   = 23
--
Local Ints:     Type   =20 Polarity    Trigger     Bus = ID  =20 IRQ    APIC ID=20 PIN#
           = ;    =20 ExtINT  active-hi       =20 edge        2     = 0        255   =20 0
           &n= bsp;   =20 NMI     = active-hi       =20 edge        2     = 0        255    = 1
 
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D
 
------=_NextPart_000_0007_01C232AC.48122E70-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message