Date: Wed, 20 Sep 1995 21:19:07 -0700 (PDT) From: "Rodney W. Grimes" <rgrimes@GndRsh.aac.dev.com> To: bmk@dtr.com Cc: nathan@netrail.net, freebsd-current@FreeBSD.org, freebsd-questions@FreeBSD.org Subject: Re: network setup Message-ID: <199509210419.VAA01036@GndRsh.aac.dev.com> In-Reply-To: <199509202349.QAA00400@everest> from "bmk@dtr.com" at Sep 20, 95 04:49:49 pm
next in thread | previous in thread | raw e-mail | index | archive | help
>
>
> > In netstart it says "Set up all the network interfaces, calling startup
> > scripts if needed" Well I do need start info that will not go in
> > sysconfig. How do I format the script what do I call the script?
>
> > This is what I need to do to get the network to run.
>
> > /usr/hdlc/utils/hdlccfg /usr/hdlc/utils/hdlc0.cfg
> > /usr/hdlc/utils/hdlccfg /usr/hdlc/utils/hdlc1.cfg
> > ifconfig ed0 205.215.0.1 netmask 255.255.255.0
> > ifconfig ed1 205.215.6.1 netmask 255.255.255.0
> > ifconfig ed1 alias 204.117.64.1 netmask 255.255.255.0
> > ifconfig eth0 144.228.27.38 144.228.27.37 netmask 255.255.255.252
> > ifconfig eth1 204.183.22.13 204.183.22.14 netmask 255.255.255.252
> > /usr/hdlc/utils/ifhdlc
>
> > And then everything works, I know how to make it work if I type all that
> > in by hand, but I need it in the script but don't know where to put it.
>
> Create a script named /etc/netstart.{interface_name} - I'd guess that
> you'd use /etc/netstart.hdlc?.
>
> You might have to hardcode it into netstart since you don't appear to be
> using ifconfig on hdlc?.
cat >/etc/start_if.eth0
#!/bin/sh
/usr/hdlc/utils/hdlccfg /usr/hdlc/utils/hdlc0.cfg
^D
cat >/etc/start_if.eth1
#!/bin/sh
/usr/hdlc/utils/hdlccfg /usr/hdlc/utils/hdlc1.cfg
In /etc/sysconfig change:
network_interfaces="lo0"
to:
network_interfaces="ed0 ed1 eth0 eth1 lo0"
and add:
ifconfig_ed0="inet 205.215.0.1 netmask 255.255.255.0"
ifconfig_ed1="inet 205.215.6.1 netmask 255.255.255.0"
ifconfig_eth0="inet 144.228.27.38 144.228.27.37 netmask 255.255.255.252"
ifconfig_eth1="inet 204.183.22.13 204.183.22.14 netmask 255.255.255.252"
This still leaves the ed1 alias unhandled and the ifhdlc command not
done. I don't recognize the hdlc stuff so I am not sure where that
should really go, but this is the proper way to do most of what you
want without modifying anything but /etc/sysconfig.
--
Rod Grimes rgrimes@gndrsh.aac.dev.com
Accurate Automation Company Reliable computers for FreeBSD
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199509210419.VAA01036>