Date: Sun, 27 Jun 1999 11:58:28 +0200 From: Lars =?iso-8859-1?Q?K=F6ller?= <lkoeller@cc.fh-lippe.de> To: Lars =?iso-8859-1?Q?K=F6ller?= <lkoeller@cc.fh-lippe.de> Cc: freebsd-questions@FreeBSD.ORG, freebsd-smp@FreeBSD.ORG, Thierry.Herbelot@alcatel.fr Subject: Re: New freeze with 3.2-RELEASE (SMP and audio)!! Message-ID: <199906270958.LAA91826@cc.fh-lippe.de> In-Reply-To: lkoeller's message of Sat, 26 Jun 1999 23:03:10 %2B0200. <199906262103.XAA00889@cc.fh-lippe.de>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multipart MIME message.
--==_Exmh_-17238871240
Content-Type: text/plain; charset=us-ascii
----------
Hi!
I hope I'm not too fast with my conclusions (normally I am :-), but
the instability seems to result from th missing option
options FFS_ROOT #FFS usable as root device [keep this!]
which is new in 3.2-RELEASE. Is this possible?
After fiddeling with all this details, sometimes I wish myself a
kernel configuration utility, which is able to avoid such problems
....
The next step is to activate the soundcard again .....
At the moment I'm just running a SMP kernel again and do a 'make
world' for testing.
Regards
Lars
In reply to Lars =?iso-8859-1?Q?K=F6ller?= who wrote:
> It seems not so easy as mentioned in my first mail, still total
> freezes! I just trying another kernel ......
>
> Any ideas, comments on my kernel config file are wellcome!
>
> In reply to Lars =?iso-8859-1?Q?K=F6ller?= who wrote:
>
> > Hi!
> >
> > Sorry for warming this up, but migration from 3.1-R to 3.2-R, from
> > source was a horor trip!
> >
> > However, after having a stable system now, I can tell you the reaseon:
> >
> > It was like in 3.0, too (you remember the thread) a problem with the
> > audio driver under SMP. The soundcard is a Soundblaster AWE 32 (ISA).
> >
> > My 3.1-R system was rock solid, with SMP and audio. I use the same
> > kernel config file for 3.2-R, and here the machine locks up without
> > any visible reason. After fiddle a littel bit with diferent configs
> > and different kernel configuration, all leads to the sound driver
> > (voxware). I also tried the last OSS version, but after loading the
> > module during install the machine locks up.
> >
> > I append my kernel config file, the kernel.config file and the
> > dmesg output. New since 3.2-R is the output "AWE32 not detected".
> >
> > Is there anybody out there with running a SB AWE32 on an 3.2-R
> > machine with SMP?
--==_Exmh_-17238871240
Content-Type: text/plain ; name="ODIE"; charset=us-ascii
Content-Description: ODIE
Content-Disposition: attachment; filename="ODIE"
#####################################################################
# ODIE kernel config file
#
machine "i386"
cpu "I686_CPU" # aka Pentium Pro(tm)
ident ODIE
maxusers 32
config kernel root on da0 dumps on da0
#####################################################################
# This allows you to actually store this configuration file into
# the kernel binary itself, where it may be later read by saying:
# strings /kernel | grep ^___ | sed -e 's/^___//' > MYKERNEL
#
options INCLUDE_CONFIG_FILE # Include this file in kernel
#####################################################################
# Create a SMP capable kernel (mandatory options):
#
options SMP #Smmetric Multiprocessor Kernel
options APIC_IO #Smmetric (APIC) I/O
#####################################################################
# Lets always enable the kernel debugger for SMP.
#
options DDB
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options MAXCONS=8 #Number of max. allowed virt. consoles
options SOFTUPDATES
options QUOTA #enable disk quotas
options PERFMON #Pentium (Pro) performance counters
options SYSVSHM #System V shared memory support
options SYSVSEM #System V Semophore support
options SYSVMSG #System V Message support
options UCONSOLE #Allow ordinary users to take the
#console - this is useful for X.
options XSERVER #include code for XFree86
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options SC_HISTORY_SIZE=512 #number of history buffer lines
#####################################################################
# KTRACE enables the system-call tracing facility ktrace(2).
#
options KTRACE #kernel tracing
#####################################################################
# ISA devices
#####################################################################
controller isa0
options "AUTO_EOI_1"
options "AUTO_EOI_2"
#####################################################################
# Floppy
#
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
#device apm0 at isa?
controller pnp0
#####################################################################
# atkbdc0 controlls both the keyboard and the PS/2 mouse
#
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12
#####################################################################
# The video card driver.
#
device vga0 at isa? port ? conflicts
# Splash screen at start up! Screen savers require this too.
pseudo-device splash
#####################################################################
# syscons is the default console driver, resembling an SCO console
#
device sc0 at isa? tty
device npx0 at isa? port IO_NPX iosiz 0x0 flags 0x0 irq 13
#####################################################################
# sio1 (dcf-77)
# serial console
#
options BREAK_TO_DEBUGGER # BREAK on console goes to DDB
options CONSPEED=19200 # default speed for console
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
#####################################################################
# Parallel-Port Bus
#
# Anscheinend mit "net" statt "tty" Probleme mit gehechselten Zeilen
# beim Drucken
#
# vpo Iomega Zip Drive
# Requires SCSI disk support ('scbus' and 'da'), best
# performance is achieved with ports in EPP 1.9 mode.
# nlpt Parallel Printer, use _instead_ of lpt0
# plip Parallel network interface
# ppi General-purpose I/O ("Geek Port")
# pps Pulse per second Timing Interface
# lpbb Philips official parallel port I2C bit-banging interface
device ppc0 at isa? port? flags 0x40 net irq 7
controller ppbus0
controller vpo0 at ppbus?
device lpt0 at ppbus?
device plip0 at ppbus?
device ppi0 at ppbus?
#####################################################################
# Audio drivers: `snd', `sb', `pas', `gus', `pca'
#
#controller snd0
#device sb0 at isa? port 0x220 irq 5 drq 1 flags 0x5
#device sbxvi0 at isa? drq 5
#device sbmidi0 at isa? port 0x330
#device awe0 at isa? port 0x620
#device opl0 at isa? port 0x388
#device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0
#####################################################################
# i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver)
# note that the ``options'' and ``device'' lines must BOTH be defined !
# Teles S0/16.3
options "TEL_S0_16_3"
device isic0 at isa? port 0xd80 net irq 10 flags 3
# Q.921 / layer 2 - i4b passive cards D channel handling
pseudo-device "i4bq921"
#
# Q.931 / layer 3 - i4b passive cards D channel handling
pseudo-device "i4bq931"
#
# layer 4 - i4b common passive and active card handling
pseudo-device "i4b"
#
# userland driver to do ISDN tracing (for passive cards oly)
pseudo-device "i4btrc" 4
# userland driver to control the whole thing
pseudo-device "i4bctl"
# userland driver for access to raw B channel
pseudo-device "i4brbch" 4
# userland driver for telephony
pseudo-device "i4btel" 2
# network driver for IP over raw HDLC ISDN
pseudo-device "i4bipr" 4
# enable VJ header compression detection for ipr i/f
options IPR_VJ
# network driver for sync PPP over ISDN
pseudo-device "i4bisppp" 4
pseudo-device sppp 4
#####################################################################
# PCI devices
#####################################################################
controller pci0
options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device
options SCSI_REPORT_GEOMETRY
#####################################################################
# Adaptec 2940[U/UW] SCSI Adapter
#
controller ahc0
controller ahc1
# Devices connected
device ch0
device da0
device sa0
device cd0
device pass0
# The syntax for wiring down devices is:
# AH2940 U
#
controller scbus0 at ahc0
# Seagate ST15150N
#
disk da0 at scbus0 target 0
disk da1 at scbus0 target 1
# Seagate Python 28388, DDS2
#
tape sa0 at scbus0 target 3
# PIONEER CD-ROM DR-433, (target 4)
#
device cd0 at scbus?
# Adic Autochanger mit HP DAT, DDS2
#
device ch0 at scbus0 target 5
tape sa1 at scbus0 target 6
# The syntax for wiring down devices is:
# AH 2940 UW
#
controller scbus1 at ahc1
# PIONEER CD-ROM DR-U12X
#
device cd1 at scbus1 target 6
# Seagate ST32171W
#
disk da2 at scbus1 target 8
disk da3 at scbus1 target 9
#####################################################################
# POSIX P1003.1B
# Real time extensions added int the 1993 Posix
# P1003_1B: Infrastructure
# _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
# _KPOSIX_VERSION: Version kernel is built for
options "P1003_1B"
options "_KPOSIX_PRIORITY_SCHEDULING"
options "_KPOSIX_VERSION=199309L"
#####################################################################
# Useful pseudo devices
#####################################################################
pseudo-device loop
pseudo-device ether
pseudo-device ccd 4
pseudo-device snp 3 #Snoop device - to look at pty/vty/etc..
pseudo-device bpfilter 4
pseudo-device pty 128
pseudo-device gzip #Exec gzipped a.out's
pseudo-device vn #Vnode driver (turns a file into a device)
--==_Exmh_-17238871240
Content-Type: text/plain; charset=us-ascii
E-Mail: | Lars Koeller
Lars.Koeller@Uni-Bielefeld.DE | UNIX Sysadmin
lkoeller@cc.fh-lippe.de | Computing Center
PGP-key: | University of Bielefeld
http://www.nic.surfnet.nl/pgp/pks-toplev.html | Germany
----------- FreeBSD, what else? ---- http://www.freebsd.org -------------
--==_Exmh_-17238871240--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199906270958.LAA91826>