Date: Tue, 27 Sep 2011 12:18:25 +0200 From: "crsnet.pl" <crsnet@crsnet.pl> To: Adrian Chadd <adrian@freebsd.org> Cc: freebsd-hardware@freebsd.org, freebsd-current@freebsd.org, freebsd-stable@freebsd.org, freebsd-questions@freebsd.org, freebsd-drivers@freebsd.org Subject: Re: FreeBSD 9-Beta3 on X300 2 problems Message-ID: <2ffb7b182a16c6ced96733b7a9f7c6d0@i-pi.pl> In-Reply-To: <CAJ-Vmo=M_Y6dveSvHr8b0HdsuzXctCRGKwSo1ENuOpstrDtfqA@mail.gmail.com> References: <8bce9b8a86d5c7a83095d8e58f794f64@i-pi.pl> <9e25323fa87abb93af1946c9ed2c399e@i-pi.pl> <CAJ-Vmo=M_Y6dveSvHr8b0HdsuzXctCRGKwSo1ENuOpstrDtfqA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> Hi,
Hello, thanks for reply.
>
> Please try to do this without wlan loaded at all (not just down, but
> build your wifi support as a module.)
> Then try without X, see whether it's related to that or not.
>
First i make kldunload if_iwn.
When i try to suspend from X, Xorg close, i see console and laptop
suspend.
When i resume it, i get console (any key dosent work), when i try to
ALT+F9 i get black screen and beep;/
But when i try to suspen from console. I get :
pci0: failed to set ACPI power state D2 \_SB_.PCI0_EXP0:
AE_BAD_PARAMETER
pci0: failed to set ACPI power state D2 \_SB_.PCI0_EXP1:
AE_BAD_PARAMETER
pci0: failed to set ACPI power state D2 \_SB_.PCI0_EXP2:
AE_BAD_PARAMETER
And laptop suspend, when i resume it. He hangs when i press any buttons
it does nothing. And than i see on console that info :
ugen0.2: <Broadcom Corp> ... disconnected
ugen4.2: <Sierra Wireless> ... disconnected
ubt0: at uhub0 ... disconnected
then i see this presed lethers
and
acpi0: suspend request ignored (not ready yet) and laptops langs and
beep ;/
> (And you haven't told us what your hardware is.)
#dmesg (+WITNESS)
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-BETA3 #3: Tue Sep 27 10:47:57 CEST 2011
cr4sh@x300:/sys/amd64/compile/GENERIC amd64
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Intel(R) Core(TM)2 Duo CPU L7100 @ 1.20GHz (1197.03-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping
= 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,P
BE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 2019139584 (1925 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <LENOVO TP-7T >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32
(20110527/tbfadt-556)
ACPI Warning: Optional field Gpe1Block has zero address or length:
0x000000000000102C/0x0 (20110527/tbfadt-586)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <LENOVO TP-7T> on motherboard
CPU0: local APIC error 0x40
acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ef00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem
0xfa000000-0xfa0fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
vgapci1: <VGA-compatible display> mem 0xfa100000-0xfa1fffff at device
2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port
0x1828-0x182f,0x180c-0x180f,0x1820-0x1827,0x1808-0x180b,0x1810-0x181f
irq 18 at device 3.2 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1840-0x185f
mem 0xfa200000-0xfa21ffff,0xfa225000-0xfa225fff irq 20 at device 25.0 o
n pci0
em0: Using an MSI interrupt
acquiring duplicate lock of same type: "network driver"
1st &dev_spec->swflag_mutex @ dev/e1000/e1000_ich8lan.c:785
2nd &dev_spec->nvm_mutex @ dev/e1000/e1000_ich8lan.c:751
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
kdb_backtrace() at kdb_backtrace+0x37
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x8de
_mtx_lock_flags() at _mtx_lock_flags+0x79
e1000_acquire_nvm_ich8lan() at e1000_acquire_nvm_ich8lan+0x1e
e1000_read_nvm_ich8lan() at e1000_read_nvm_ich8lan+0x76
e1000_post_phy_reset_ich8lan() at e1000_post_phy_reset_ich8lan+0x1b1
e1000_reset_hw_ich8lan() at e1000_reset_hw_ich8lan+0x4c1
em_attach() at em_attach+0x11bd
device_attach() at device_attach+0x69
bus_generic_attach() at bus_generic_attach+0x1a
acpi_pci_attach() at acpi_pci_attach+0x14f
device_attach() at device_attach+0x69
bus_generic_attach() at bus_generic_attach+0x1a
acpi_pcib_attach() at acpi_pcib_attach+0x1a7
acpi_pcib_acpi_attach() at acpi_pcib_acpi_attach+0x231
device_attach() at device_attach+0x69
bus_generic_attach() at bus_generic_attach+0x1a
acpi_attach() at acpi_attach+0xbc5
device_attach() at device_attach+0x69
bus_generic_attach() at bus_generic_attach+0x1a
nexus_acpi_attach() at nexus_acpi_attach+0x69
device_attach() at device_attach+0x69
bus_generic_new_pass() at bus_generic_new_pass+0xd6
bus_set_pass() at bus_set_pass+0x7a
configure() at configure+0xa
mi_startup() at mi_startup+0x77
btext() at btext+0x2c
em0: Ethernet address: 00:21:86:58:72:d9
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f
irq 20 at device 26.0 on pci0
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f
irq 21 at device 26.1 on pci0
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
0xfa426c00-0xfa426fff irq 22 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem
0xfa220000-0xfa223fff irq 17 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
iwn0: <Intel(R) Wireless WiFi Link 4965> mem 0xf9f00000-0xf9f01fff irq
17 at device 0.0 on pci3
pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib3
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf
irq 16 at device 29.0 on pci0
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df
irq 17 at device 29.1 on pci0
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18e0-0x18ff
irq 18 at device 29.2 on pci0
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
0xfa427000-0xfa4273ff irq 19 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci13: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8M UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ahci0: <Intel ICH8M AHCI SATA controller> port
0x1c50-0x1c57,0x1c44-0x1c47,0x1c48-0x1c4f,0x1c40-0x1c43,0x1c20-0x1c3f
mem 0xfa426000-0xfa4267
ff irq 16 at device 31.2 on
pci0
ahci0: AHCI v1.10 with 3 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 2 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: Analog Devices AD1984A
pcm0: <HDA Analog Devices AD1984A PCM #0 Analog> at cad 0 nid 1 on
hdac0
pcm1: <HDA Analog Devices AD1984A PCM #1 Digital> at cad 0 nid 1 on
hdac0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus3 target 0 lun 0
ada0: <SAMSUNG MCCOE64G8MPP-0VA PS105L16> ATA-7 SATA 2.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 61057MB (125045424 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
cd0 at ata0 bus 0 scbus2 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-844 RC02> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus6 usbus2
uhub6: 6 ports with 6 removable, self powered
ugen0.2: <Broadcom Corp> at usbus0
Root mount waiting for: usbus6
ugen6.2: <Chicony Electronics Co., Ltd.> at usbus6
ugen4.2: <Sierra Wireless, Incorporated> at usbus4
ugen0.3: <STMicroelectronics> at usbus0
u3g0: <Data Interface> on usbus4
u3g0: Found 3 ports.
ugen6.3: <ManfID> at usbus6
Trying to mount root from ufs:/dev/ad8s1a [rw]...
WARNING: / was not properly dismounted
vboxdrv: fAsync=1 offMin=0x969c6 offMax=0x969c6
supdrvGipCreate: omni timer not supported, falling back to synchronous
mode
vboxnet0: Ethernet address: 0a:00:27:00:00:00
wlan0: Ethernet address: 00:21:5c:53:a9:4b
ubt0: <Broadcom Corp BCM2045B, class 224/1, rev 2.00/1.00, addr 2> on
usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
drm0: <Intel i965GM> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
lock order reversal:
1st 0xffffff8079d5c658 bufwait (bufwait) @ kern/vfs_bio.c:2658
2nd 0xfffffe0077c6e800 dirhash (dirhash) @ ufs/ufs/ufs_dirhash.c:284
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
kdb_backtrace() at kdb_backtrace+0x37
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x807
_sx_xlock() at _sx_xlock+0x55
ufsdirhash_acquire() at ufsdirhash_acquire+0x33
ufsdirhash_add() at ufsdirhash_add+0x19
ufs_direnter() at ufs_direnter+0x909
ufs_makeinode() at ufs_makeinode+0x26a
VOP_CREATE_APV() at VOP_CREATE_APV+0x8d
vn_open_cred() at vn_open_cred+0x46a
kern_openat() at kern_openat+0x1f9
amd64_syscall() at amd64_syscall+0x3ba
Xfast_syscall() at Xfast_syscall+0xf7
--- syscall (5, FreeBSD ELF64, sys_open), rip = 0x803593eac, rsp =
0x7fffffffd2f8, rbp = 0x8 ---
Regards.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2ffb7b182a16c6ced96733b7a9f7c6d0>