Date: Wed, 07 Apr 1999 16:01:12 +1000 From: Kyle Buttress <kyle@pchost.com> To: freebsd-questions@freebsd.org Subject: mgetty ppp dialin server? Message-ID: <370AF4A7.CF692477@pchost.com>
next in thread | raw e-mail | index | archive | help
At the moment I am trying to have my FreeBSD 3.1 box accept dialin, its partially working. we I call up the modem answers and i get a terminal screen. how can I get it to pass over to ppp? I am using mgetty+sendfax to auto answer and this is where I get stuck. I have the following configs. ppp.conf _______ default: set log Phase Chat LCP IPCP CCP tun command set device /dev/cuaa1 set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT" PAPServerwithPASSWD: enable pap enable passwdauth enable proxy set ifaddr 192.168.1.100 accept dns direct-server: set timeout 0 set lqrperiod 10 set log Phase LQM set ifaddr 192.168.1.100 enable lqr accept lqr pap: enable pap set ifaddr 192.168.1.100 enable proxy accept dns kyle: set ifaddr 192.168.1.100 192.168.1.100 255.255.255.0 kyle: add 192.168.1.100 netmask 255.255.255.0 HISADDR ___________ options ___________ crtscts # Hardware flow control passive # wait for LCP modem # modem line +pap login auth domain pchost.com # your domain proxyarp # use ARP proxy routing defaultroute ___________ options.ttyd0 ___________ 203.24.253.106:192.168.1.100 # ip's of local and remote hosts ___________ ppp-pap-dialup ___________ #!/bin/sh exec /usr/sbin/ppp -direct pap$IDENT ___________ pap-secrets ___________ kyle * mypasswd ___________ ppp.secret ___________ kyle mypass 192.168.1.100 kyle ___________ login.config (mgetty) ___________ /AutoPPP/ - - /etc/ppp/ppp-pap-dialup ___________ ttys ___________ cuaa1 "/usr/local/sbin/mgetty -s 19200" dialup on secure ___________ here is part of the ppp.log ___________________ Apr 7 12:26:17 bob ppp[320]: Phase: Using interface: tun0 Apr 7 12:26:17 bob ppp[320]: Phase: deflink: Created in closed state Apr 7 12:26:17 bob ppp[320]: Phase: PPP Started (direct mode). Apr 7 12:26:18 bob ppp[320]: Phase: bundle: Establish Apr 7 12:26:18 bob ppp[320]: Phase: deflink: closed -> opening Apr 7 12:26:18 bob ppp[320]: Phase: deflink: Connected! Apr 7 12:26:18 bob ppp[320]: Phase: deflink: opening -> lcp Apr 7 12:26:34 bob ppp[320]: Phase: deflink: Disconnected! Apr 7 12:26:34 bob ppp[320]: Phase: deflink: Connect time: 16 secs: 198 octets in, 475 octets out Apr 7 12:26:34 bob ppp[320]: Phase: total 42 bytes/sec, peak 57 bytes/sec on Wed Apr 7 12:26:34 1999 Apr 7 12:26:34 bob ppp[322]: Phase: 320 -> 322: Dropped session control Apr 7 12:26:34 bob ppp[322]: Phase: deflink: lcp -> closed Apr 7 12:26:34 bob ppp[322]: Phase: bundle: Dead Apr 7 12:26:34 bob ppp[322]: Phase: deflink: Carrier lost Apr 7 12:26:34 bob ppp[322]: Phase: PPP Terminated (normal). ___________________ here is part of the mgetty.cuaa1 log ___________________04/07 14:39:30 aa1 mgetty: experimental test release 1.1.19-Nov24 04/07 14:39:30 aa1 check for lockfiles 04/07 14:39:30 aa1 locking the line 04/07 14:39:33 aa1 lowering DTR to reset Modem 04/07 14:39:33 aa1 send: ATS0=0Q0&D3&C1[0d] 04/07 14:39:33 aa1 waiting for ``OK'' ** found ** 04/07 14:39:33 aa1 mdm_send: 'ATI' 04/07 14:39:34 aa1 USR Courier/Sportster V.34(+) detected 04/07 14:39:34 aa1 mdm_send: 'ATI3' 04/07 14:39:34 aa1 additional info: 'Texas Instruments 33600/Fax V2.5' 04/07 14:39:34 aa1 mdm_send: 'AT+FCLASS=2.0' -> OK 04/07 14:39:34 aa1 mdm_send: 'AT+FAA=1;+FCR=1' -> OK 04/07 14:39:34 aa1 mdm_send: 'AT+FBO=1' -> OK 04/07 14:39:34 aa1 mdm_send: 'AT+FNR=1,1,1,0' -> OK 04/07 14:39:35 aa1 mdm_send: 'AT+FLI="00 00 000000"' -> OK 04/07 14:39:35 aa1 mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' -> OK 04/07 14:39:35 aa1 waiting... 04/07 15:39:35 aa1 checking if modem is still alive 04/07 15:39:35 aa1 mdm_send: 'AT' -> OK 04/07 15:39:36 aa1 waiting... ______________________ I have made these changes in the rc.config ______________________ ifconfig_tun0="inet 192.168.1.100 netmask 255.255.255.0" gateway_enable="YES" ______________________ I think that I am close to getting it working but I cannot see what I have missed I have gone through the tutorials on FreeBSD and read many mails but i cannot see the answer. Any help would be very much appreciated. Kyle To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?370AF4A7.CF692477>