Date: Wed, 10 Mar 2010 17:47:11 -0600 From: Adam Vande More <amvandemore@gmail.com> To: ports@freebsd.org Subject: /usr/ports/print/hplip3 Message-ID: <6201873e1003101547n23b88f33tff89f5fdb6eed850@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
/usr/ports/print/hplip3 The message in this port indicates you must recompile your kernel for it to work. > The printer MUST attach as a ugen(4) device. This means > that you must NOT have "device ulpt" in your kernel and > ulpt must NOT be loaded as a kernel module. That is not the experience that I have had with the port, although I had to bork with the permissions to get it working. The devfs.rules instructions were not adequate to make it work. lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen0.1 -> usb/0.1.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen0.2 -> usb/0.2.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen0.3 -> usb/0.3.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen1.1 -> usb/1.1.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen1.2 -> usb/1.2.0 lrwxrwxrwx 1 joe cups 9 Mar 9 20:40 ugen1.3 -> usb/1.3.0 crwxrwxrwx 1 joe cups 0, 76 Mar 9 20:45 ulpt0 > usbconfig list ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen1.2: <Deskjet D1600 series HP> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.2: <USB AUDIO vendor 0x1130> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.3: <USB2.0-CRW Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.3: <USB Receiver Logitech> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON I under the permissions here are excessive, but it's unclear from the cups log as how exactly cups is communicating with the printer. It states the connection is made to hp:/usb/Deskjet_D1600_series?serial=CN012C90C405CT -- Adam Vande More
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6201873e1003101547n23b88f33tff89f5fdb6eed850>