From owner-freebsd-scsi Wed Feb 14 11:29:51 2001 Delivered-To: freebsd-scsi@freebsd.org Received: from aslan.scsiguy.com (mail.scsiguy.com [63.229.232.106]) by hub.freebsd.org (Postfix) with ESMTP id 7E09E37B491 for ; Wed, 14 Feb 2001 11:29:46 -0800 (PST) Received: from scsiguy.com (localhost [127.0.0.1]) by aslan.scsiguy.com (8.11.2/8.9.3) with ESMTP id f1EJTTO54765; Wed, 14 Feb 2001 12:29:30 -0700 (MST) (envelope-from gibbs@scsiguy.com) Message-Id: <200102141929.f1EJTTO54765@aslan.scsiguy.com> To: "Matthew N. Dodd" Cc: Joerg Wunsch , freebsd-scsi@FreeBSD.ORG Subject: Re: Problems with AIC7770-based controller on -current In-Reply-To: Your message of "Mon, 12 Feb 2001 14:29:51 EST." Date: Wed, 14 Feb 2001 12:29:29 -0700 From: "Justin T. Gibbs" Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >> Is this current -current? Your stack traces don't seem to match up >> with the latest code. > >CURRENT as of about mid-day yesterday. I've been unable to reproduce this so far on this system. Of course, I'm not running -current on it, that would be suicide, but the driver should be the same between the two branches. I'll be adding another drive to the other channel today to see if that causes a failure. -- Justin Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-STABLE #1: Wed Feb 14 11:58:34 MST 2001 root@nevrast.btc.adaptec.com:/usr/src/sys/compile/NEVRAST Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P54C (90.20-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping = 5 Features=0x3bf real memory = 33554432 (32768K bytes) avail memory = 28524544 (27856K bytes) Preloaded elf kernel "kernel" at 0xc030c000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc030c09c. Intel Pentium detected, installing workaround for F00F bug npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 isab0: at device 2.0 on pci0 eisa0: on isab0 mainboard0: on eisa0 slot 0 ahc0: at 0x3c00-0x3cff, irq 11 (level) ahc0: on eisa0 slot 3 aic7770: Twin Channel, A SCSI Id=7, B SCSI Id=7, primary A, 4/255 SCBs isa0: on isab0 atapci0: irq 14 at device 4.0 on pci0 atapci0: Busmastering DMA not supported atapci0: Busmastering DMA disabled fxp0: port 0xfce0-0xfcff mem 0xfed00000-0xfedfffff,0xfec00000-0xfec00fff irq 9 at device 13.0 on pci0 fxp0: Ethernet address 00:a0:c9:b3:bc:47 pci0: (vendor=0x11ab, dev=0x6320) at 14.0 irq 10 pci0: at 15.0 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppbus0: IEEE1284 device found Probing for PnP devices on ppbus0: ppi0: on ppbus0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ep0: <3Com 3C509B-TP EtherLink III (PnP)> at port 0x210-0x21f irq 5 on isa0 ep0: Ethernet address 00:a0:24:82:d4:59 Waiting 2 seconds for SCSI devices to settle da0 at ahc0 bus 0 target 6 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 8750MB (17921835 512 byte sectors: 255H 63S/T 1115C) Mounting root from ufs:/dev/da0s2a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message