Date: Sat, 16 Aug 2014 09:53:51 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: Hans Petter Selasky <hps@selasky.org> Cc: hackers@freebsd.org Subject: Re: Mellanox 10gb driver? Message-ID: <0E7861FF-AB45-421F-8BA0-0EAD02B85AF0@cs.huji.ac.il> In-Reply-To: <53EDF13D.5050206@selasky.org> References: <5FA0CF8C-2C93-4639-AA6C-40D3C278FE0F@cs.huji.ac.il> <53EDF13D.5050206@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Aug 15, 2014, at 2:38 PM, Hans Petter Selasky <hps@selasky.org> =
wrote:
> On 08/15/14 12:55, Daniel Braniss wrote:
>> hi all,
>> any idea if there is/will be a driver for:
>>=20
>> none3@pci0:5:0:0: class=3D0x020000 card=3D0x005515b3 =
chip=3D0x100315b3 rev=3D0x00 hdr=3D0x00
>> vendor =3D 'Mellanox Technologies'
>> device =3D 'MT27500 Family [ConnectX-3]'
>> class =3D network
>> subclass =3D ethernet
>>=20
>=20
> Hi,
>=20
> If you build the kernel using MK_OFED=3Dyes, your hardware is =
supported by the following modules:
>=20
> .if ${MK_OFED} !=3D "no" || defined(ALL_MODULES)
> _mlx4=3D mlx4
> _mlx4ib=3D mlx4ib
> _mlxen=3D mlxen
> _mthca=3D mthca
> .endif
>=20
> You need to run latest -stable due to some compile issues which have =
been fixed.
>=20
> =97HPS
hi,
I added WITH_MK_OFED=3Dyes to the latest stable but no joy, it=92s sill =
reported as none.
is there some magic that i=92m missing?
thanks,
danny
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0E7861FF-AB45-421F-8BA0-0EAD02B85AF0>