Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 17 Jan 2002 19:43:00 -0500 (EST)
From:      Bernie Doehner <bdoehner@enterasys.com>
To:        <questions@freebsd.org>, <mobile@freebsd.org>, <hardware@freebsd.org>
Subject:   trouble with PCMCIA running 4.4-RELEASE or 5.0-CURRENT on Tecra 8000
Message-ID:  <20020117193314.V37716-100000@roam.enterasys.com>

next in thread | raw e-mail | index | archive | help
Dear All,

I am trying to get 4.4-RELEASE or 5.0-CURRENT (I don't really care which one)
running on a Toshiba Tecra 8000 laptop, but Toshiba in their infinite
wisdom seems to have forced all devices to use IRQ 11 (which the
latest BIOS reports are the "PCI IRQ").

Under Windows most devices report using irq 11, including PCMCIA, video
(which they also do in the FreeBSD dmesg below).

This breaks the PCMCIA driver in 4.4-RELEASE and 5.0-CURRENT (default
installation). I have tried various changes, such as using polled mode
for the PCMCIA driver (under BSD), and the closest I got my
Xircom 10/100 PCMCIA ethernet card to work is getting the card to transmit
(and actualy got the transmit done interrupt), but no receipt interrupt.

I even tried upgrading to the latest changes in
/sys/i386/isa/pci_cfgreg.c to no avail.

Any suggestions are much appreciated..

Thanks/Best Regards,
Bernie Doehner

----------------------------------------------------------------------------
=== Bernie Doehner                                                       ===
=== Firmware Engineer                           Enterasys Networks, Inc. ===
=== bdoehner@enterasys.com  	                35 Industrial Way        ===
=== Office: (603) 337-1315                      Rochester, NH 03866      ===


Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
    murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134152192 (131008K bytes)
avail memory = 126017536 (123064K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00f1320
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0
chip2: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 9.0 on pci0
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 0:11 INTA routed to irq 11
pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 11 at device 11.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_linked: linked (61) to hard-routed irq 11
pci_cfgintr: 0:11 INTB routed to irq 11
pcic1: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 11 at device 11.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pccard1: <PC Card bus (classic)> on pcic1
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 1
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 9590MB <IBM-DJSA-210> [19485/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 1


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020117193314.V37716-100000>