Date: Tue, 4 Jan 2005 00:52:12 GMT From: wl_angel <wl_angel@163.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/75776: NO ps/2 keyboard using USB keyboard under bsd4.10 and 5.3 Message-ID: <200501040052.j040qCke098584@www.freebsd.org> Resent-Message-ID: <200501040100.j0410xhm008815@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 75776 >Category: i386 >Synopsis: NO ps/2 keyboard using USB keyboard under bsd4.10 and 5.3 >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Jan 04 01:00:58 GMT 2005 >Closed-Date: >Last-Modified: >Originator: wl_angel >Release: 4.8and4.10 >Organization: bxxgz >Environment: freebsd 4.8 release #0 Thu Apr 3 10:53:38 GMT 2003 root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC i386 >Description: under bsd4.8 my USB keyboard work well.when install freebsd4.10 or 5.3,The USB keyboard don't work,when booting ,the bsd can't detect the USB keyboard,but delay a while,So I can't install the bsd system. under 4.8 boot ******************************************************** Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003 root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Intel Celeron (800.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 267386880 (261120K bytes) avail memory = 254943232 (248968K bytes) Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 4 entries at 0xc00fdf30 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82810 (i810 GMCH) Host To Hub bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem 0xd6000000-0xd607ffff,0xd0000000-0xd3ffffff irq 10 at device 1.0 on pci0 pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xd5000000-0xd50000ff irq 11 at device 10.0 on pci1 rl0: Ethernet address: 00:e0:4c:39:42:3a miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH ATA66 controller> port 0xf000-0xf00f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801AA (ICH) USB controller> port 0xd000-0xd01f irq 9 at device 31.2 on pci0 usb0: <Intel 82801AA (ICH) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ukbd0: Genesys Logic USB Keyboard, rev 1.10/0.00, addr 2, iclass 3/1 kbd0 at ukbd0 ums0: Genesys Logic USB Keyboard, rev 1.10/0.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xcffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 38166MB <ST340015A> [77545/16/63] at ata0-master UDMA66 acd0: CDROM <SAMSUNG CD-ROM SC-148T> at ata1-slave PIO4 Mounting root from ufs:ad0s1a ************************************ under freebsd 4.10 or 5.3 ""ukbd0: Genesys Logic USB Keyboard, rev 1.10/0.00, addr 2, iclass 3/1 kbd0 at ukbd0 ums0: Genesys Logic USB Keyboard, rev 1.10/0.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir."" not appeared how to resolve this problem? sorry for my poor English! >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200501040052.j040qCke098584>