Date: Tue, 03 Jan 2012 08:29:01 -0800 From: Sean Bruno <seanbru@yahoo-inc.com> To: Richard Kojedzinszky <krichy@tvnetwork.hu> Cc: "freebsd-xen@freebsd.org" <freebsd-xen@freebsd.org> Subject: Re: 8.2 releng Message-ID: <1325608141.6073.2646.camel@hitfishpass-lx.corp.yahoo.com> In-Reply-To: <alpine.DEB.2.02.1201031716410.13202@krichy.tvnetwork.hu> References: <alpine.DEB.2.02.1201031038270.4835@krichy.tvnetwork.hu> <alpine.DEB.2.02.1201031055190.5292@krichy.tvnetwork.hu> <1325606428.6073.2615.camel@hitfishpass-lx.corp.yahoo.com> <alpine.DEB.2.02.1201031716410.13202@krichy.tvnetwork.hu>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-pbfl4J663yZZTJcJszFu Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit No, not the kernel config. See attached example. Sean On Tue, 2012-01-03 at 08:16 -0800, Richard Kojedzinszky wrote: > Dear Sean, > > Attached. > > Thanks in advance, > > > Kojedzinszky Richard > Euronet Magyarorszag Informatikai Zrt. > > On Tue, 3 Jan 2012, Sean Bruno wrote: > > > Date: Tue, 03 Jan 2012 08:00:28 -0800 > > From: Sean Bruno <seanbru@yahoo-inc.com> > > To: Richard Kojedzinszky <krichy@tvnetwork.hu> > > Cc: "freebsd-xen@freebsd.org" <freebsd-xen@freebsd.org> > > Subject: Re: 8.2 releng > > > > Can you send in your xen domu config? > > > > Sean > > > > On Tue, 2012-01-03 at 01:56 -0800, Richard Kojedzinszky wrote: > >> Dear users, > >> > >> I forget to mention, If i remove pf and pflog from the config, then the > >> built kernel boots well under xen. > >> > >> Regards, > >> > >> > >> Kojedzinszky Richard > >> Euronet Magyarorszag Informatikai Zrt. > >> > >> On Tue, 3 Jan 2012, Richard Kojedzinszky wrote: > >> > >>> Date: Tue, 3 Jan 2012 10:40:13 +0100 (CET) > >>> From: Richard Kojedzinszky <krichy@tvnetwork.hu> > >>> To: freebsd-xen@FreeBSD.org > >>> Subject: 8.2 releng > >>> > >>> Dear xen developers, > >>> > >>> I have a xen domU with the attached config, and unfortunately it does not > >>> boot. I am compiling it with: > >>> $ make kernel KERNCONF=DB WERROR= > >>> > >>> And it only makes a crash dump in the hosts xm dmesg. > >>> > >>> It is a recent 8.2 releng src tree. > >>> > >>> What should I change to make this work? > >>> > >>> Regards, > >>> > >>> Kojedzinszky Richard > >>> Euronet Magyarorszag Informatikai Zrt. > >> _______________________________________________ > >> freebsd-xen@freebsd.org mailing list > >> http://lists.freebsd.org/mailman/listinfo/freebsd-xen > >> To unsubscribe, send any mail to "freebsd-xen-unsubscribe@freebsd.org" > > > > --=-pbfl4J663yZZTJcJszFu Content-Disposition: attachment; filename="domu.config" Content-Type: text/plain; name="domu.config"; charset="UTF-8" Content-Transfer-Encoding: 7bit ============================================================================ # Python configuration setup for 'xm create'. # This script sets the parameters used when a domain is created using 'xm create'. # You use a separate script for each domain you want to create, or # you can set the parameters for the domain on the xm command line. #============================================================================ #---------------------------------------------------------------------------- # Kernel image file. #kernel = "/usr/lib/xen/boot/hvmloader" kernel = "/var/virt/freebsd-8-stable-i386-domu-kernel" #---------------------------------------------------------------------------- # device model to use: only qemu-dm available for now #device_model = '/usr/lib64/xen/bin/qemu-dm' #builder='hvm' # Initial memory allocation (in megabytes) for the new domain. memory = 855 # number of CPUS vcpus = 1 # A name for your domain. All domains must have different names. name = "ref8-xen32" arch = "i386" #Network interface. By default emules a realtek 8139. For a NetBSD guest you # have to disable re(4) and let rtk attach to use it. # ne2k_pci emulates a pci ne2000 clone; this his cpu-hungry in dom0 # pcnet emulates a AMD PCnet-PCI controller; but it corrupts packets with # pcn(4) under NetBSD. #vif = [ 'mac=00:16:3e:00:00:01, bridge=xenbr0, type=ioemu' ] vif = [ 'mac=00:16:3e:00:00:01, bridge=xenbr0, type=vbd' ] # Define the disk devices you want the domain to have access to, and # what you want them accessible as. # Each disk entry is of the form phy:UNAME,DEV,MODE # where UNAME is the device, DEV is the device name the domain will see, # and MODE is r for read-only, w for read-write. # For hvm domains you can only use hda to hdd. You can set extra types # (e.g. cdrom) disk = [ 'file:/var/virt/ref8-xen32.bin,hda,w' ] extra = "vfs.root.mountfrom=ufs:/dev/ad0s1a" # floppy images; this doesn't seem to work currently. Use a iso image instead. #fda = '/home/domains/boot1.fs' # boot device: a = floppy, c= hard drive, d= cdrom (with the disk entry # before) # # boot CDROM image #boot='d' # boot from DISK file #boot='c' # boot from DHCP/PXE then DISK file boot='nc' # By default, 'xm create' will try to open an X window on the current display # for the virtal framebuffer. You can have the virtal framebuffer in vnc # instead, and connect using a vnc client (using localhost:$vncdisplay) # If vncunused is set to 1 (this is the default value), vncdisplay # will be set to the first unused port; so it's recommended to #vfb = [ "type = vnc, vncdisplay = 1, vncunused = 0, display = TEST" ] #Xen emulates a PS/2 mouse, but the pointer in the guest has difficulties # tracking the absolute position. Xen can emulate a USB tablet in addition # to the mouse which will report the absolute position of the pointer, # and make the mouse much easier to use. # usb=1 usbdevice='tablet' #usbdevice='mouse' apci = 1 serial='pty' on_reboot='restart' #============================================================================ --=-pbfl4J663yZZTJcJszFu--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1325608141.6073.2646.camel>