From owner-freebsd-scsi Mon Apr 15 18:51:13 2002 Delivered-To: freebsd-scsi@freebsd.org Received: from rwcrmhc53.attbi.com (rwcrmhc53.attbi.com [204.127.198.39]) by hub.freebsd.org (Postfix) with ESMTP id 0380037B41E for ; Mon, 15 Apr 2002 18:50:13 -0700 (PDT) Received: from ledzep ([12.238.198.51]) by rwcrmhc53.attbi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20020416015010.RRAK1083.rwcrmhc53.attbi.com@ledzep> for ; Tue, 16 Apr 2002 01:50:10 +0000 From: "Jordan Breeding" To: Subject: Trouble installing 5.0-DP1 to a Tyan Thunder K7 (aic7xxx)... Date: Tue, 16 Apr 2002 01:50:13 -0000 Message-ID: MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_000B_01C1E4E9.0D1509C0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.3416 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Disposition-Notification-To: "Jordan Breeding" Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org This is a multi-part message in MIME format. ------=_NextPart_000_000B_01C1E4E9.0D1509C0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hello, I have recently aquired a new Tyan Thunder K7 (S2462UNG) with on-board Adaptec scsi. Everything with the scsi works great in DOS, Linux and Windows. However, I hate using Windows, and Linux is giving me lots of trouble with this board in regards to rebooting and shuting down properly. I was playing with some old FreeBSD CDROMs I had laying around the other and it appeared that from the CDROM at least FreeBSD can correctly reboot this machine. While I still use linux for the bulk of my work I decided I could at least do a small install of FreeBSD on my virtually unused SCSI 4 GB hd at Channel A, id 0 and go from there. So I first decided to boot from the 5.0-DP1 iso which I downloaded, but this didn't work as I expected, the disc booted, found my IDE hard drive, found my SCSI CDROM and went into the sysinstal without ever finding my SCSI hard drive. So then I tried the 4.5 discs which I had laying around. I no longer have my 4.4 discs but something tells me those wouldn't have done much better, and I would want to be able to do CVS pulls of current anyway which was the original breakage I noticed. So since I do not have a serial console laying around at the moment I decided to do a boot -v and then boot the "live" filesystem and dump the dmesg to a floppy. In this email (sorry about the length) I have included a dmesg output from Linux (which works as far as the SCSI goes, I am using 2.4.19-pre6 with some other patches and am using the new aic7xxx driver from Justin Gibbs) as well as the dmesg from a boot -v showing the failure of the FreeBSD 5.0-DP1 boot to find my Channel A and hence failure to find my hard drive. Thanks for any help, please let me know if there is anything I can try to fix this. I do not have room anywhere on my current IDE drive for FreeBSD so I need to try and eventually get a fixed install method so that I can install to the scsi drive. Thanks for any help which you can give me in solving this situation. Jordan Breeding PS - I am not on this list so please Cc: me on replies. ------=_NextPart_000_000B_01C1E4E9.0D1509C0 Content-Type: text/plain; name="dmesg_linux.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg_linux.txt" IOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) found SMP MP-table at 000f74d0 hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. ACPI: Searched entire block, no RSDP was found. ACPI: RSDP located at physical address c00f7470 RSD PTR v0 [PTLTD ] __va_range(0x1fffd505, 0x68): idx=3D8 mapped at ffff6000 ACPI table found: RSDT v1 [PTLTD RSDT 1540.0] __va_range(0x1ffffb2e, 0x24): idx=3D8 mapped at ffff6000 __va_range(0x1ffffb2e, 0x74): idx=3D8 mapped at ffff6000 ACPI table found: FACP v1 [TYAN GUINNESS 1540.0] __va_range(0x1ffffba2, 0x24): idx=3D8 mapped at ffff6000 __va_range(0x1ffffba2, 0x5e): idx=3D8 mapped at ffff6000 ACPI table found: APIC v1 [PTLTD APIC 1540.0] __va_range(0x1ffffba2, 0x5e): idx=3D8 mapped at ffff6000 LAPIC (acpi_id[0x0000] id[0x1] enabled[1]) CPU 0 (0x0100) enabledProcessor #1 Pentium(tm) Pro APIC version 16 LAPIC (acpi_id[0x0001] id[0x0] enabled[1]) CPU 1 (0x0000) enabledProcessor #0 Pentium(tm) Pro APIC version 16 IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1]) LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1]) 2 CPUs total Local APIC address fee00000 Enabling the CPU's according to the ACPI table Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: TYAN Product ID: GUINNESS APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Phoenix Technologies Ltd.Guinness-8 03/21/2002TyanTHUNDER K7EVT1 = 0123456789TyanTHUNDER K7EVT1 Kernel command line: ro = root=3D/dev/hda7 profile=3D2 nmi_watchdog=3D1 acpismp=3Dforce = video=3Dradeon:1280x1024-8@85 3 Initializing CPU#0 Detected 1592.916 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3178.49 BogoMIPS Memory: 509716k/524224k available (2672k kernel code, 14120k reserved, = 645k data, 348k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor =3D 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor =3D 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU0: AMD Athlon(tm) MP 1900+ stepping 02 per-CPU timeslice cutoff: 731.57 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3185.04 BogoMIPS CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor =3D 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU1: AMD Athlon(tm) Processor stepping 02 Total of 2 processors activated (6363.54 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-7, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 = not connected. ..TIMER: vector=3D0x31 pin1=3D2 pin2=3D0 activating NMI Watchdog ... done. testing NMI watchdog ... CPU#0: NMI appears to be stuck! number of MP IRQ sources: 20. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: =20 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 51 07 000 00 1 0 0 0 0 0 0 00 08 003 03 0 0 0 0 0 1 1 59 09 003 03 0 0 0 0 0 1 1 61 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 69 0d 003 03 0 0 0 0 0 1 1 71 0e 003 03 0 0 0 0 0 1 1 79 0f 003 03 0 0 0 0 0 1 1 81 10 003 03 1 1 0 1 0 1 1 89 11 003 03 1 1 0 1 0 1 1 91 12 003 03 1 1 0 1 0 1 1 99 13 003 03 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1592.9701 MHz. ..... host bus clock speed is 265.4950 MHz. cpu: 0, clocks: 2654950, slice: 884983 CPU0 cpu: 1, clocks: 2654950, slice: 884983 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map =3D 0x2) All processors have done init_idle mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfd7c0, last bus=3D1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I11,P0) -> 19 PCI->APIC IRQ transform: (B0,I12,P0) -> 16 PCI->APIC IRQ transform: (B0,I13,P0) -> 16 PCI->APIC IRQ transform: (B0,I13,P1) -> 17 PCI->APIC IRQ transform: (B0,I15,P0) -> 18 PCI->APIC IRQ transform: (B0,I16,P0) -> 19 PCI->APIC IRQ transform: (B1,I5,P0) -> 17 BIOS failed to enable PCI standards compliance, fixing this error. I/O APIC: AMD Errata #22 may be present. In the event of instability try : booting with the "noapic" option. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12 (20020219) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Journalled Block Device driver loaded cdfs 0.5c loaded. NTFS driver v1.1.22 [Flags: R/W] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: Core Subsystem version [20011018] ACPI: Subsystem enabled ACPI: System firmware supports S0 S1 S4 S5 Processor[0]: C0 C1 Processor[1]: C0 C1 ACPI: Power Button (FF) found ACPI: Multiple power buttons detected, ignoring fixed-feature ACPI: Power Button (CM) found ACPI: Sleep Button (FF) found i2c-core.o: i2c core module version 2.6.3 (20020322) i2c-dev.o: i2c /dev entries driver module version 2.6.3 (20020322) i2c-proc.o version 2.6.3 (20020322) i2c-amd756.o version 2.6.3 (20020322) i2c-dev.o: Registered 'SMBus AMD7X6 adapter at 80e0' as minor 0 i2c-amd756.o: AMD756/766 bus detected and initialized i2c-isa.o version 2.6.3 (20020322) i2c-dev.o: Registered 'ISA main adapter' as minor 1 i2c-isa.o: ISA bus access for i2c modules initialized. radeonfb: ref_clk=3D2700, ref_div=3D12, xclk=3D23000 defaults Console: switching to colour frame buffer device 160x64 radeonfb: ATI Radeon 7500 QW DDR SGRAM 64 MB radeonfb: DVI port CRT monitor connected radeonfb: CRT port no monitor connected pty: 2048 Unix98 ptys configured w83781d.o version 2.6.3 (20020322) eeprom.o version 2.6.3 (20020322) Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ = SERIAL_PCI ISAPNP SERIAL_ACPI enabled ttyS00 at 0x03f8 (irq =3D 4) is a 16550A ttyS01 at 0x02f8 (irq =3D 3) is a 16550A ttyS04 at port 0x1400 (irq =3D 16) is a 16550A Real Time Clock Driver v1.10e Non-volatile memory driver v1.1 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with = idebus=3Dxx AMD7411: IDE controller on PCI bus 00 dev 39 AMD7411: chipset revision 1 AMD7411: not 100% native mode: will probe irqs later AMD7411: disabling single-word DMA support (revision < C4) ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: ST380021A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=3D9729/255/63, = UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 = p13 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0f.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0x2000. Vers = LK1.1.16 00:10.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0x2080. Vers = LK1.1.16 PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Universal TUN/TAP device driver 1.4 (C)1999-2001 Maxim Krasnyansky Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected AMD 760MP chipset agpgart: AGP aperture is 64M @ 0xec000000 [drm] AGP 0.99 on AMD Irongate @ 0xec000000 64MB [drm] Initialized radeon 1.1.1 20010405 on minor 0 SCSI subsystem driver Revision: 1.00 Loading Adaptec I2O RAID: Version 2.4 Build 5 Detecting Adaptec I2O RAID controllers... scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5 aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5 aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs Vendor: IBM Model: DCAS-34330W Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 (scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 15, 16bit) scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Vendor: TEAC Model: CD-R55S Rev: 1.0R Type: CD-ROM ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 8467200 512-byte hdwr sectors (4335 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0 (scsi1:A:5): 10.000MB/s transfers (10.000MHz, offset 15) sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 Creative EMU10K1 PCI Audio Driver, version 0.18, 17:24:28 Apr 11 2002 emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0x2400-0x241f, IRQ 19 ac97_codec: AC97 codec, id: 0x5452:0x4123 (TriTech TR A5) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xc00dc000, IRQ 19 usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-766 = [ViperPlus] USB usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 4 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 21845) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 348k freed hub.c: USB new device connect on bus1/1, assigned device number 2 input0: USB HID v1.00 Mouse [0430:0100] on usb1:2.0 hub.c: USB new device connect on bus1/2, assigned device number 3 input1: USB HID v1.00 Keyboard [0430:0005] on usb1:3.0 Adding Swap: 2097136k swap-space (priority -1) Adding Swap: 2097136k swap-space (priority -2) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,13), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,12), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: no IPv6 routers present eth1: no IPv6 routers present ------=_NextPart_000_000B_01C1E4E9.0D1509C0 Content-Type: text/plain; name="dmesg_freebsd.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg_freebsd.txt" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-DP1 #1: Sun Apr 7 11:02:24 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/i386/compile/BOOTMFS Preloaded elf kernel "/kernel" at 0xc0815000. Preloaded mfs_root "/mfsroot" at 0xc0815090. Calibrating clock(s) ... TSC clock: 1592628231 Hz, i8254 clock: 1192980 = Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1592902403 Hz CPU: AMD Athlon(tm) MP 1900+ (1592.90-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x662 Stepping =3D 2 = Features=3D0x383fbff AMD Features=3D0xc0480000 Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way = associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way = associative real memory =3D 536805376 (524224K bytes) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x0083c000 - 0x1ffe7fff, 528138240 bytes (128940 pages) avail memory =3D 514035712 (501988K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f7440 bios32: Entry =3D 0xfd6a0 (c00fd6a0) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xfd6a0+0x120 pnpbios: Found PnP BIOS data at 0xc00f7490 pnpbios: Entry =3D f0000:9ea4 Rev =3D 1.0 Other BIOS signatures found: null: mem: Pentium Pro MTRR support enabled md0: Preloaded image 4423680 bytes at 0xc03dbf00 Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x80003850 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there = (id=3D700c1022) Using $PIR table, 268435454 entries at 0xc00fdef0 npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: physical bus=3D0 map[10]: type 3, range 32, base ec000000, size 26, enabled map[14]: type 3, range 32, base e8004000, size 12, enabled map[18]: type 4, range 32, base 00002430, size 2, port disabled found-> vendor=3D0x1022, dev=3D0x700c, revid=3D0x11 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 found-> vendor=3D0x1022, dev=3D0x700d, revid=3D0x00 bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 found-> vendor=3D0x1022, dev=3D0x7410, revid=3D0x02 bus=3D0, slot=3D7, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 map[20]: type 4, range 32, base 0000f000, size 4, enabled found-> vendor=3D0x1022, dev=3D0x7411, revid=3D0x01 bus=3D0, slot=3D7, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 found-> vendor=3D0x1022, dev=3D0x7413, revid=3D0x01 bus=3D0, slot=3D7, func=3D3 class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0 map[10]: type 1, range 32, base 000dc000, size 12, enabled found-> vendor=3D0x1022, dev=3D0x7414, revid=3D0x07 bus=3D0, slot=3D7, func=3D4 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 intpin=3Dd, irq=3D11 map[10]: type 4, range 32, base 00002400, size 5, enabled found-> vendor=3D0x1102, dev=3D0x0002, revid=3D0x08 bus=3D0, slot=3D11, func=3D0 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D1 intpin=3Da, irq=3D11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00002438, size 3, enabled found-> vendor=3D0x1102, dev=3D0x7002, revid=3D0x08 bus=3D0, slot=3D11, func=3D1 class=3D09-80-00, hdrtype=3D0x00, mfdev=3D1 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8003000, size 8, enabled map[14]: type 4, range 32, base 00001400, size 8, enabled map[18]: type 4, range 32, base 00001000, size 8, enabled map[1c]: type 4, range 32, base 00002440, size 3, enabled found-> vendor=3D0x11c1, dev=3D0x0480, revid=3D0x00 bus=3D0, slot=3D12, func=3D0 class=3D07-03-03, hdrtype=3D0x00, mfdev=3D0 intpin=3Da, irq=3D5 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 4, range 32, base 00001800, size 8, enabled map[14]: type 1, range 64, base e8001000, size 12, enabled found-> vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01 bus=3D0, slot=3D13, func=3D0 class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1 intpin=3Da, irq=3D5 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 1, range 64, base e8002000, size 12, enabled found-> vendor=3D0x9005, dev=3D0x00cf, revid=3D0x01 bus=3D0, slot=3D13, func=3D1 class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1 intpin=3Db, irq=3D10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002000, size 7, enabled map[14]: type 1, range 32, base e8003400, size 7, enabled found-> vendor=3D0x10b7, dev=3D0x9805, revid=3D0x78 bus=3D0, slot=3D15, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 intpin=3Da, irq=3D7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00002080, size 7, enabled map[14]: type 1, range 32, base e8003800, size 7, enabled found-> vendor=3D0x10b7, dev=3D0x9805, revid=3D0x78 bus=3D0, slot=3D16, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xe8100000-0xe81fffff pcib1: prefetched decode 0xf0000000-0xf7ffffff pci1: physical bus=3D1 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 4, range 32, base 00003000, size 8, enabled map[18]: type 1, range 32, base e8100000, size 16, enabled found-> vendor=3D0x1002, dev=3D0x5157, revid=3D0x00 bus=3D1, slot=3D5, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: on pcib1 pci1: at device 5.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xf000-0xf00f at device 7.1 on = pci0 ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0xf000 ata0: mask=3D03 ostat0=3D50 ostat2=3D00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=3D03 stat0=3D50 stat1=3D00 ata0-master: ATA 01 a5 ata0: devices=3D01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0xf008 ata1: mask=3D03 ostat0=3D20 ostat2=3D30 ata1-master: ATAPI 20 20 ata1-slave: ATAPI 30 30 ata1: mask=3D03 stat0=3D20 stat1=3D30 ata1-master: ATA 25 25 ata1-slave: ATA 25 25 ata1: devices=3D00 ata1: at 0x170 irq 15 on atapci0 pci0: at device 7.3 (no driver attached) ohci0: mem 0xdc000-0xdcfff irq 11 at device 7.4 = on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ums0: Sun Microsystems Type 6 USB mouse, rev 1.00/1.02, addr 2, iclass = 3/1 ums0: 3 buttons ukbd0: Sun Microsystems Type 6 USB keyboard, rev 1.00/1.02, addr 3, = iclass 3/1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 pci0: at device 11.0 (no driver attached) pci0: