Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Nov 2006 05:49:12 +0000
From:      Chris <chrcoluk@gmail.com>
To:        "FreeBSD Stable" <freebsd-stable@freebsd.org>
Subject:   sshfs/nfs cause server lockup
Message-ID:  <3aaaa3a0611212149u21146180ra84503472a0336e3@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
On a few occasions all different remote servers I have had nfs cause
servers to stop responding so I stopped  using it all the servers were
either 6.0 release 6.1 release or 6-stable.

We recently discovered sshfs which supports cross platform mounting
server is linux and I mounted on a freebsd 6.1 release using security
branch up to date.

it was working fine for around 5 to 6 days with some problems with
sshfs not updating files that are updated but wasnt compromising the
stability of the freebsd server I just remounted to keep up to date.
Then today the linux server had network problems so the sshfs timed
out and there is 2 dirs I mount, the first mounted fine a bit slow but
connected but when I ran the command to mount the 2nd dir the server
stopped responding.

My 2nd ssh terminal was alive I tried to run top to see if sshfs was
hanging or something but when I hit enter top didnt run and the 2nd
terminal was froze, note both terminals didnt timeout and a ircd
running on the server also did not timeout but the box wasnt listening
to any new requests, it was responding to pings fine.

I have a remote reboot facility on the box but no local access and no
kvm/serial console facility available this is the case for all of my
servers.  I initially tried a soft reboot which uses ctrl-alt-delete
but the pings kept replying so I could see the reboot wasn initiated
indicating some kind of console lockup as well, I then did a hard
reboot which brought the server back.

All logs stopped when the first lockup occured so no errors etc.
recorded bear in mind I have no local access to this machine.  It does
appear that 6.x has some kind of serious remote mounting bug because I
never had these nfs problems in freebsd 5.x.

I would be interested in any thoughts as to what could help me I have
rebooted the server now with network mpsafe disabled to see if this
will help it is using a generic kernel with the following changes.

options directio, polling, noadaptive mutexes, adaptive giant,ipv6 and
nfs disabled.

dmesg output below.  I left the reboot showing vnodes because it also
looks supicous it took so long for it to synch the disks, this was
following a working reboot the remote reboot of course was improper
shutdown.

The hd is a sata2 but dmesg shows as ata33

Syncing disks, vnodes remaining...3 3 1 0 2 1 1 1 1 1 1 1 1 1 1 1 2 1
1 1 1 1 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p10 #1: Sat Nov 11 23:02:09 GMT 2006
    admin@heaven.chrysalisnet.org:/usr/obj/usr/src/sys/HEAVEN
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3800+ (2410.95-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 939261952 (895 MB)
avail memory = 909828096 (867 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <processor> at device 1.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdfe7f000-0xdfe7ffff irq
21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfe7ec00-0xdfe7ecff
irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xec00-0xec3f mem 0xdffff000-0xdffffff
f,0xdffc0000-0xdffdffff irq 16 at device 6.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:bf:b5:c9
fxp0: [GIANT-LOCKED]
pci0: <multimedia> at device 5.0 (no driver attached)
atapci0: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <GENERIC ATA controller> port
0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f
mem 0xdfe7d000-0xdfe7dfff irq 20 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <GENERIC ATA controller> port
0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f
mem 0xdfe7c000-0xdfe7cfff irq 21 at device 8.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <display, VGA> at device 13.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: [FAST]
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2410945801 Hz quality 800
Timecounters tick every 1.000 msec
ad4: 238475MB <SAMSUNG SP2504C VT100-41> at ata2-master UDMA33
Trying to mount root from ufs:/dev/ad4s1a

Regards

Chris



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3aaaa3a0611212149u21146180ra84503472a0336e3>