Date: Mon, 4 Sep 2000 13:11:24 -0400 (EDT) From: Gadi Yechiel Golan <ggolan@engin.umich.edu> To: questions@freebsd.org Subject: TV Tuner Problem Message-ID: <Pine.SOL.4.02.10009041302070.28263-200000@igor.engin.umich.edu>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi,
I have a Hauppauge WinTV Tuner card. I am not sure if it is the
Brooktree Bt848 or the Bt878, but I am pretty sure it is one of the two,
being that is the Chipset Hauppauge uses. On top of that, my Ensoniq
AudioPCI card does not seem to be recognized either. Both seem to be
supported by FreeBSD, but neither seem to be recognized. Everything else
seems to work just fine though. I tried CVSuping and making the world, as
well as using LINT to specificaly say that I had a Hauppauge card.
Nothing seems to be working. I have attached my system's dmesg, which
shows two cards as unrecognized. If you have any suggestions that would
be wonderful.
Thanks,
Gadi Golan
ggolan@engin.umich.edu
[-- Attachment #2 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #0: Sun Sep 3 18:44:23 EDT 2000
gadig@photon.nyc.rr.com:/usr/src/sys/compile/PHOTON082900
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping = 3
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 134217728 (131072K bytes)
avail memory = 126550016 (123584K bytes)
Preloaded elf kernel "kernel" at 0xc040f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <VGA-compatible display device> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port 1 power on failed, IOERROR
uhub0: port 2 power on failed, IOERROR
chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0
pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 16.0 irq 9
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 16.1 irq 9
pci0: <unknown card> (vendor=0x1274, dev=0x5000) at 18.0 irq 5
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebfff80-0xfebfffff irq 10 at device 20.0 on pci0
xl0: Ethernet address: 00:50:da:b9:d5:cb
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master using UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6602B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
logo_saver: no suitable graphics mode
module_register_init: MOD_LOAD (logo_saver, c0f11a60, 0) error 19
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SOL.4.02.10009041302070.28263-200000>