From owner-freebsd-stable@FreeBSD.ORG Tue Apr 26 04:16:06 2005 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2657F16A4CE for ; Tue, 26 Apr 2005 04:16:06 +0000 (GMT) Received: from carver.gumbysoft.com (carver.gumbysoft.com [66.220.23.50]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9B7FF43D55 for ; Tue, 26 Apr 2005 04:16:05 +0000 (GMT) (envelope-from dwhite@gumbysoft.com) Received: by carver.gumbysoft.com (Postfix, from userid 1000) id 90FC272DE5; Mon, 25 Apr 2005 21:16:05 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by carver.gumbysoft.com (Postfix) with ESMTP id 8AF2272DE4; Mon, 25 Apr 2005 21:16:05 -0700 (PDT) Date: Mon, 25 Apr 2005 21:16:05 -0700 (PDT) From: Doug White To: Viktor Rosendahl In-Reply-To: <200504231114.23215.viktor.rosendahl@saunalahti.fi> Message-ID: <20050425211547.Q43358@carver.gumbysoft.com> References: <200504231114.23215.viktor.rosendahl@saunalahti.fi> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII cc: freebsd-stable@freebsd.org Subject: Re: 5.4-RC3 Kernel Panic: "vinvalbuf: dirty bufs" (backtrace included) X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 26 Apr 2005 04:16:06 -0000 On Sat, 23 Apr 2005, Viktor Rosendahl wrote: > Hi, > > Last night when I was asleep my FreeBSD workstation suffered a kernel panic > and did a coredump. The panic occurred at 3.02 AM, that is one minute after > the start of the daily script (coincidence?). > > The only "unusual" thing I have been doing before the panic was that I was > playing with a 1GB USB Flash memory stick. I found out that in order to > create a partition on the device, I need to make it slightly smaller than the > maximum suggested by sysinstall (I used sysinstall to partition the device > out of pure lazyness). However, I think the panic occurred a couple of hours > later and the USB media was not mounted at the time (not 100% sure but I > think so), so I don't think it is related but I can be wrong. Yanking the stick without unmounting it will cause this type of panic. Don't do that. :) > Here is the backtrace that I obtained from kgdb: > > #0 doadump () at pcpu.h:159 > #1 0xc05c7a2a in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:410 > #2 0xc05c7d31 in panic (fmt=0xc07fcb12 "vinvalbuf: dirty bufs") > at /usr/src/sys/kern/kern_shutdown.c:566 > #3 0xc0626032 in vinvalbuf (vp=0xc4ae4210, flags=1, cred=0x0, td=0x0, > slpflag=0, slptimeo=0) at /usr/src/sys/kern/vfs_subr.c:972 > #4 0xc06298e5 in vclean (vp=0xc4ae4210, flags=8, td=0xc235f480) > at /usr/src/sys/kern/vfs_subr.c:2478 > #5 0xc062a0ea in vgonel (vp=0xc4ae4210, td=0x0) > at /usr/src/sys/kern/vfs_subr.c:2697 > #6 0xc0624d83 in vlrureclaim (mp=0xc261a800) at pcpu.h:156 > #7 0xc06250af in vnlru_proc () at /usr/src/sys/kern/vfs_subr.c:598 > #8 0xc05af48a in fork_exit (callout=0xc0624e5d , arg=0x0, > frame=0x0) at /usr/src/sys/kern/kern_fork.c:790 > #9 0xc0790d0c in fork_trampoline () at /usr/src/sys/i386/i386/exception.s:209 > > > And the content of the info file: > > Dump header from device /dev/ad4s1b > Architecture: i386 > Architecture Version: 16777216 > Dump Length: 1073414144B (1023 MB) > Blocksize: 512 > Dumptime: Sat Apr 23 03:02:10 2005 > Hostname: > Magic: FreeBSD Kernel Dump > Version String: FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005 > :/usr/obj/usr/src/sys/ATA > Panic String: vinvalbuf: dirty bufs > Dump Parity: 3518619234 > Bounds: 21 > Dump Status: good > > > ...and here is the dmesg that I obtained after the machine had rebooted after > the panic: > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005 > :/usr/obj/usr/src/sys/ATA > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2605.92-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff > Hyperthreading: 2 logical CPUs > real memory = 1073414144 (1023 MB) > avail memory = 1040875520 (992 MB) > ACPI APIC Table: > ioapic0: Changing APIC ID to 2 > ioapic0 irqs 0-23 on motherboard > acpi0: on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > agp0: mem 0xf8000000-0xfbffffff at device 0.0 > on pci0 > pcib1: at device 1.0 on pci0 > pci1: on pcib1 > pci1: at device 0.0 (no driver attached) > pci1: at device 0.1 (no driver attached) > uhci0: port 0xef00-0xef1f irq 16 > at device 29.0 on pci0 > usb0: on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: port 0xef20-0xef3f irq 19 > at device 29.1 on pci0 > usb1: on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: port 0xef40-0xef5f irq 18 > at device 29.2 on pci0 > usb2: on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: port 0xef80-0xef9f irq 16 > at device 29.3 on pci0 > usb3: on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: mem 0xfebffc00-0xfebfffff irq 23 at > device 29.7 on pci0 > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib2: at device 30.0 on pci0 > pci2: on pcib2 > skc0: port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff > irq 22 at device 5.0 on pci2 > skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) > sk0: on skc0 > sk0: Ethernet address: 00:11:d8:52:51:d6 > miibus0: on sk0 > e1000phy0: on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, > auto > atapci0: port > 0xdf90-0xdf9f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem > 0xfeaf8000-0xfeafbfff irq 21 at device 9.0 on pci2 > ata2: channel #0 on atapci0 > ata3: channel #1 on atapci0 > em0: port > 0xdf00-0xdf3f mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 22 at > device 10.0 on pci2 > em0: Ethernet address: 00:0e:0c:06:21:17 > em0: Speed:N/A Duplex:N/A > asr0: mem 0xe8000000-0xefffffff irq 20 at device > 12.0 on pci2 > asr0: ADAPTEC 2400A FW Rev. 3A0L, 4 channel, 256 CCBs, Protocol I2O > pcib3: at device 12.1 on pci2 > pci3: on pcib3 > isab0: at device 31.0 on pci0 > isa0: on isab0 > atapci1: port > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci1 > ata1: channel #1 on atapci1 > pci0: at device 31.3 (no driver attached) > pcm0: port 0xee80-0xeebf,0xe800-0xe8ff mem > 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0 > pcm0: > acpi_button0: on acpi0 > atkbdc0: port 0x64,0x60 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on > acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: on ppc0 > plip0: on ppbus0 > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > npx0: on motherboard > npx0: INT 16 interface > orm0: at iomem > 0xd1000-0xd6fff,0xcf800-0xd0fff,0xcd000-0xcf7ff,0xc0000-0xccfff on isa0 > pmtimer0 on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2605920328 Hz quality 800 > Timecounters tick every 10.000 msec > IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled > acd0: DVDR at ata0-master PIO4 > acd1: DVDROM at ata0-slave PIO4 > ad4: 190782MB [387621/16/63] at ata2-master > UDMA100 > ad6: 286103MB [581290/16/63] at ata3-master UDMA133 > da0 at asr0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: Tagged Queueing Enabled > da0: 228957MB (468903936 512 byte sectors: 255H 63S/T 29187C) > cd0 at ata0 bus 0 target 0 lun 0 > cd0: Removable CD-ROM SCSI-0 device > cd0: 16.000MB/s transfers > cd0: cd present [2133520 x 2048 byte records] > cd1 at ata0 bus 0 target 1 lun 0 > cd1: Removable CD-ROM SCSI-0 device > cd1: 16.000MB/s transfers > cd1: cd present [3911061 x 2048 byte records] > Mounting root from ufs:/dev/ad4s1a > em0: Link is up 1000 Mbps Full Duplex > drm0: port 0xc000-0xc0ff mem > 0xfe8f0000-0xfe8fffff,0xe0000000-0xe3ffffff irq 16 at device 0.0 on pci1 > info: [drm] AGP at 0xf8000000 64MB > info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 > info: [drm] Loading R200 Microcode > umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2 > da1 at umass-sim0 bus 0 target 0 lun 0 > da1: Removable Direct Access SCSI-2 device > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready > change, > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retries Exhausted > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > umass0: at uhub4 port 1 (addr 2) disconnected > (da1:umass-sim0:0:0:0): lost device > (da1:umass-sim0:0:0:0): removing device entry > umass0: detached > umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2 > da1 at umass-sim0 bus 0 target 0 lun 0 > da1: Removable Direct Access SCSI-2 device > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready > change, > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retries Exhausted > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): WRITE(10). CDB: 2a 0 0 0 0 21 0 0 8 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): DATA PROTECT asc:27,0 > (da1:umass-sim0:0:0:0): Write protected > (da1:umass-sim0:0:0:0): Unretryable error > umass0: at uhub4 port 1 (addr 2) disconnected > (da1:umass-sim0:0:0:0): lost device > (da1:umass-sim0:0:0:0): removing device entry > umass0: detached > umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2 > da1 at umass-sim0 bus 0 target 0 lun 0 > da1: Removable Direct Access SCSI-2 device > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready > change, > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retries Exhausted > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > panic: vinvalbuf: dirty bufs > Uptime: 1d6h1m42s > Dumping 1023 MB > 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 272 288 304 320 336 > 352 368 384 400 416 432 448 464 480 496 512 528 544 560 576 592 608 624 640 > 656 672 688 704 720 736 752 768 784 800 816 832 848 864 880 896 912 928 944 > 960 976 992 1008Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005 > :/usr/obj/usr/src/sys/ATA > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2605.92-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff > Hyperthreading: 2 logical CPUs > real memory = 1073414144 (1023 MB) > avail memory = 1040875520 (992 MB) > ACPI APIC Table: > ioapic0: Changing APIC ID to 2 > ioapic0 irqs 0-23 on motherboard > acpi0: on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > agp0: mem 0xf8000000-0xfbffffff at device 0.0 > on pci0 > pcib1: at device 1.0 on pci0 > pci1: on pcib1 > pci1: at device 0.0 (no driver attached) > pci1: at device 0.1 (no driver attached) > uhci0: port 0xef00-0xef1f irq 16 > at device 29.0 on pci0 > usb0: on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: port 0xef20-0xef3f irq 19 > at device 29.1 on pci0 > usb1: on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: port 0xef40-0xef5f irq 18 > at device 29.2 on pci0 > usb2: on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: port 0xef80-0xef9f irq 16 > at device 29.3 on pci0 > usb3: on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: mem 0xfebffc00-0xfebfffff irq 23 at > device 29.7 on pci0 > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib2: at device 30.0 on pci0 > pci2: on pcib2 > skc0: port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff > irq 22 at device 5.0 on pci2 > skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) > sk0: on skc0 > sk0: Ethernet address: 00:11:d8:52:51:d6 > miibus0: on sk0 > e1000phy0: on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, > auto > atapci0: port > 0xdf90-0xdf9f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem > 0xfeaf8000-0xfeafbfff irq 21 at device 9.0 on pci2 > ata2: channel #0 on atapci0 > ata3: channel #1 on atapci0 > em0: port > 0xdf00-0xdf3f mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 22 at > device 10.0 on pci2 > em0: Ethernet address: 00:0e:0c:06:21:17 > em0: Speed:N/A Duplex:N/A > asr0: mem 0xe8000000-0xefffffff irq 20 at device > 12.0 on pci2 > asr0: ADAPTEC 2400A FW Rev. 3A0L, 4 channel, 256 CCBs, Protocol I2O > pcib3: at device 12.1 on pci2 > pci3: on pcib3 > isab0: at device 31.0 on pci0 > isa0: on isab0 > atapci1: port > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci1 > ata1: channel #1 on atapci1 > pci0: at device 31.3 (no driver attached) > pcm0: port 0xee80-0xeebf,0xe800-0xe8ff mem > 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0 > pcm0: > acpi_button0: on acpi0 > atkbdc0: port 0x64,0x60 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on > acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: on ppc0 > plip0: on ppbus0 > lpt0: on ppbus0 > lpt0: Interrupt-driven port > ppi0: on ppbus0 > npx0: on motherboard > npx0: INT 16 interface > orm0: at iomem > 0xd1000-0xd6fff,0xcf800-0xd0fff,0xcd000-0xcf7ff,0xc0000-0xccfff on isa0 > pmtimer0 on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2605921612 Hz quality 800 > Timecounters tick every 10.000 msec > IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled > acd0: DVDR at ata0-master PIO4 > acd1: DVDROM at ata0-slave PIO4 > ad4: 190782MB [387621/16/63] at ata2-master > UDMA100 > ad6: 286103MB [581290/16/63] at ata3-master UDMA133 > da0 at asr0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: Tagged Queueing Enabled > da0: 228957MB (468903936 512 byte sectors: 255H 63S/T 29187C) > cd0 at ata0 bus 0 target 0 lun 0 > cd0: Removable CD-ROM SCSI-0 device > cd0: 16.000MB/s transfers > cd0: cd present [2133520 x 2048 byte records] > cd1 at ata0 bus 0 target 1 lun 0 > cd1: Removable CD-ROM SCSI-0 device > cd1: 16.000MB/s transfers > cd1: cd present [3911061 x 2048 byte records] > Mounting root from ufs:/dev/ad4s1a > WARNING: / was not properly dismounted > WARNING: /home was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > WARNING: /big was not properly dismounted > em0: Link is up 1000 Mbps Full Duplex > drm0: port 0xc000-0xc0ff mem > 0xfe8f0000-0xfe8fffff,0xe0000000-0xe3ffffff irq 16 at device 0.0 on pci1 > info: [drm] AGP at 0xf8000000 64MB > info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 > info: [drm] Loading R200 Microcode > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > -- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org