Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Nov 2006 16:54:01 -0800
From:      Doug Barton <dougb@FreeBSD.org>
To:        "Stephane E. Potvin" <sepotvin@videotron.ca>
Cc:        freebsd-current@freebsd.org
Subject:   Re: EHCI problem on -current, and unknown devs
Message-ID:  <4564F129.70902@FreeBSD.org>
In-Reply-To: <455C2290.6010907@videotron.ca>
References:  <4564996D.50808@FreeBSD.org> <455C2290.6010907@videotron.ca>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------010308060106090902050804
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

cc'ing "Mr. rman," jhb, since this was his change.

Stephane E. Potvin wrote:
> Doug Barton wrote:
>> [ No response from the -usb list, so I'll try here. ]
>>
>> Howdy,
>>
>> I have a new Dell Latitude D620, and using recent -current I get this:
>>
>> ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
>> 0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0
>> ehci0: Could not map memory
>> device_attach: ehci0 attach returned 6
>>
>> FWIW, I also saw a user on the -stable list report this same problem.
>> I'm assuming this is bad, but what to do about it?
>>
>>
>> I'm also getting some unknown devices:
>>
>> uhub4: <vendor 0x413c product 0xa005, class 9/0, rev 2.00/50.18, addr
>> 2> on uhub0
>> uhub5: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr
>> 3> on uhub4
>> ugen2: <vendor 0x413c product 0x8103, class 224/1, rev 2.00/24.22,
>> addr 6> on uhub4
>> uhub6: <vendor 0x413c product 0x0058, class 9/0, rev 2.00/0.00, addr
>> 2> on uhub3
>>
>> Vendor ID 0x413c is Dell, and is already in the usbdevs file. The
>> other vendor is O2, and I got their ID for the attached patch from the
>> list at http://www.usb.org/developers/tools. The 0x0058 device is
>> already in our usbdevs file, it's the port replicator (docking
>> station) that the laptop is plugged into currently. I added the 0x8103
>> device in the attached patch based on an entry in the NetBSD usbdevs
>> file. (The entry makes sense to me as well, since I have one of those.)
>>
>> So I have two questions ... for the devices (and vendors) that are
>> already in my local usbdevs file, why are they still showing up by ID?
>> And how do I find the device IDs for the two unknown devices? I
>> imagine that the O2 device is related to my built in smart card
>> reader, not sure about the other one.
>>
> 
> Hi Doug,
> 
> I had the same problem with my Dell Inspiron 9400 and fixed it using the
>  following patch:
> 
> Index: sys/kern/subr_rman.c
> ===================================================================
> RCS file: /home/FreeBSD/ncvs/src/sys/kern/subr_rman.c,v
> retrieving revision 1.53
> diff -u -r1.53 subr_rman.c
> --- sys/kern/subr_rman.c        11 Sep 2006 19:31:52 -0000      1.53
> +++ sys/kern/subr_rman.c        2 Nov 2006 03:05:34 -0000
> @@ -170,7 +170,7 @@
> 
>         /* Skip entries before us. */
>         for (s = TAILQ_FIRST(&rm->rm_list);
> -            s && s->r_end + 1 < r->r_start;
> +            s && s->r_end < r->r_start;
>              s = TAILQ_NEXT(s, r_link))
>                 ;
> 
> This code was added in revision 1.53 when support for intelligent
> merging was added. When r_end is equal to UINT_MAX, adding one will
> cause it to overflow, creating quite a mess in the entries ordering. I'm
> not sure the fix I did is completely correct as I didn't had time to
> check if the +1 is needed at all in this case. At least it fixed the
> problem for me.

Works for me too. I've attached what dmesg for EHCI and 'usbdevs -v'
look like after applying this patch.

Still interested in the unknown devices though, if anyone has insight
into that issue.

Doug

-- 

    This .signature sanitized for your protection


--------------010308060106090902050804
Content-Type: text/plain;
 name="after"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="after"

ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4

Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: high speed, self powered, config 1, product 0xa005(0xa005), vendor 0x413c(0x413c), rev 50.18
  port 1 powered
  port 2 powered
  port 3 addr 3: full speed, power 200 mA, config 1, product 0x7761(0x7761), vendor 0x0b97(0x0b97), rev 1.10
   port 1 addr 4: full speed, power 100 mA, config 1, Biometric Coprocessor(0x2016), STMicroelectronics(0x0483), rev 0.01
   port 2 addr 5: full speed, self powered, config 1, O2Micro CCID SC Reader(0x7762), O2(0x0b97), rev 1.10
   port 3 powered
  port 4 addr 6: full speed, self powered, config 1, product 0x8103(0x8103), vendor 0x413c(0x413c), rev 24.22
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
 port 7 powered
 port 8 addr 7: high speed, self powered, config 1, product 0x0058(0x0058), vendor 0x413c(0x413c), rev 0.00
  port 1 addr 8: high speed, self powered, config 1, USB2.0 Hub Controller(0x0058), NEC Corporation(0x0409), rev 1.00
   port 1 powered
   port 2 powered
   port 3 powered
   port 4 powered
  port 2 powered
  port 3 addr 9: low speed, power 100 mA, config 1, Trackball(0xc404), Logitech(0x046d), rev 2.20
  port 4 powered

--------------010308060106090902050804--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4564F129.70902>