Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Apr 2012 22:30:13 +0200
From:      Albert Shih <Albert.Shih@obspm.fr>
To:        freebsd-stable@freebsd.org
Subject:   High load event idl.
Message-ID:  <20120427203013.GB60961@pcjas.obspm.fr>

next in thread | raw e-mail | index | archive | help

--Dxnq1zWXvFF0Q93v
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit

Hi all

I'm running 9-stable on all my computer. (csup yesterday). 

On my desktop everything is fine. But I've two laptop, (both are Dell). On
both latptop I've problem about the load, event when I do nothing I got a load between 0.5-1.

Here the result of a «top» on the laptop : 

last pid:  2434;  load averages:  0.63,  0.67,  0.59 up 0+00:23:59  22:25:29
57 processes:  3 running, 54 sleeping
CPU:  2.7% user,  0.0% nice,  3.7% system,  1.4% interrupt, 92.2% idle
Mem: 89M Active, 92M Inact, 198M Wired, 13M Cache, 100M Buf, 3529M Free
Swap: 4096M Total, 4096M Free

Here on the desktop : 

last pid: 61010;  load averages:  0.00,  0.00,  0.00 up 2+11:02:42  22:29:08
126 processes: 1 running, 125 sleeping
CPU:     % user,     % nice,     % system,     % interrupt,     % idle
Mem: 803M Active, 2874M Inact, 1901M Wired, 112M Cache, 620M Buf, 202M Free
Swap: 6144M Total, 36M Used, 6107M Free

On attachment the dmesg.

Any idea ? 

JAS


-- 
Albert SHIH
DIO bâtiment 15
Observatoire de Paris
5 Place Jules Janssen
92195 Meudon Cedex
Téléphone : 01 45 07 76 26/06 86 69 95 71
xmpp: jas@obspm.fr
Heure local/Local time:
ven 27 avr 2012 22:29:15 CEST

--Dxnq1zWXvFF0Q93v
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=tutu

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #0: Thu Apr 26 04:42:08 CEST 2012
    jas@io.chezmoi.fr:/usr/obj/usr/src/sys/JAS amd64
CPU: Intel(R) Core(TM)2 Duo CPU     T9500  @ 2.60GHz (2592.82-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Family = 6  Model = 17  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4081893376 (3892 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL   M08    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL M08    > on motherboard
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, dfd83c00 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 2 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xf5000000-0xf5ffffff,0xe0000000-0xefffffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1
nvidia0: <Quadro FX 1600M> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
hdac0: <Intel 82801H HDA Controller> mem 0xf6ffc000-0xf6ffffff irq 21 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib3
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xf1fff000-0xf1ffffff irq 17 at device 0.0 on pci12
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci13: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a200> mem 0xf1bf0000-0xf1bfffff irq 17 at device 0.0 on pci9
bge0: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5722 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:21:70:b7:80:8c
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib6
fwohci0: <1394 Open Host Controller Interface> mem 0xf1aff800-0xf1afffff irq 19 at device 1.0 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 48:4f:c0:00:0c:7c:04:90
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 4a:4f:c0:7c:04:90
fwe0: Ethernet address: 4a:4f:c0:7c:04:90
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 48:4f:c0:00:0c:7c:04:90 @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x3a88000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci3: <base peripheral, SD host controller> at device 1.1 (no driver attached)
pci3: <base peripheral> at device 1.2 (no driver attached)
pci3: <base peripheral> at device 1.3 (no driver attached)
pci3: <base peripheral> at device 1.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
atapci1: <Intel ICH8M SATA300 controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xeff0-0xefff irq 18 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> port 0x10c-0x113 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcd7ff,0xcd800-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
vboxdrv: fAsync=0 offMin=0x16c offMax=0x41d
hdacc0: <Sigmatel STAC9205X HDA CODEC> at cad 0 on hdac0
hdaa0: <Sigmatel STAC9205X HDA CODEC Audio Function Group> at nid 1 on hdacc0
pcm0: <Sigmatel STAC9205X HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 13,10 and 11 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <ST9200423ASG DE14> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 190782MB (390721968 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-L632H D400> Removable CD-ROM SCSI-0 device 
SMP: AP CPU #1 Launched!
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ugen0.2: <vendor 0x0b97> at usbus0
uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on usbus0
Trying to mount root from ufs:/dev/ad4s3a [rw]...
uhub7: 4 ports with 3 removable, self powered
ugen0.3: <O2> at usbus0
wlan0: Ethernet address: 00:1f:3c:c8:fa:20
wpi0: need multicast update callback
wpi0: need multicast update callback
wpi0: need multicast update callback
wlan0: link state changed to UP
wpi0: need multicast update callback
wpi0: need multicast update callback
wpi0: need multicast update callback

--Dxnq1zWXvFF0Q93v--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120427203013.GB60961>