Date: Sun, 02 Jan 2000 12:40:47 -0500 From: Scot <scotrn@pilot.infi.net> To: freebsd-questions@FreeBSD.ORG Subject: USR 3CP5610 56K PCI modem (ppp) Message-ID: <386F8D9F.8BCF808D@pilot.infi.net>
next in thread | raw e-mail | index | archive | help
Hi; Posted to Newsgroup comp.unix.bsd.freebsd.misc but only got one response. I was hopping to get better news. Is there anything I can do to get this working ? Anything from here useful? http://www.math.sunysb.edu/~comech/tools Thanks Scot ---------------------------------------------------------------------------------- I could be wrong, but the last time I checked PCI modems aren't supporte under FreeBSD... In article <386C4241.BFCC0AE6@pilot.infi.net> you write: >Hi; > > I am new to BSD so please forgive me if I have overlooked something >obvious. > > Anyone got this working ? > I think I have the kernel seeing it but I cannot talk to it using ppp > or cu -l /dev/cuaa[0-3] > > I was able to get my 28.8 external working but the strange thing is it > is connected to COM1 but to talk to It I have to use cuaa1. Does that >make > any sense ? To make sure I took out all card - the video and still had >to use > cuaa1. > >Any help on the 56K modem would be greatly appreciated! >Here is my dmesg and relevant kernel config > >---------------------- dmesg ----------------------------------------- > >Copyright (c) 1992-1999 Free BSD Inc. >Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights >reserved. >FreeBSD 3.3-RELEASE #0: Wed Dec 29 20:10:48 EST 1999 > root@web.engrs.infi.net:/usr/src/sys/compile/WEB >Timecounter "i8254" frequency 1193182 Hz >Timecounter "TSC" frequency 132954964 Hz >CPU: Pentium/P54C (132.95-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x52c Stepping = 12 > Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> >real memory = 83886080 (81920K bytes) >avail memory = 78151680 (76320K bytes) >Preloaded elf kernel "kernel" at 0xc0325000. >Probing for devices on PCI bus 0: >chip0: <Intel 82437VX PCI cache memory controller> rev 0x01 on pci0.0.0 >chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 >ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1 >bt0: <Buslogic Multi-Master SCSI Host Adapter> rev 0x00 int a irq 9 on >pci0.14.0 >bt0: BT-946C FW Rev. 4.25J Narrow SCSI Host Adapter, SCSI ID 7, 100 CCBs >vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 11 on >pci0.15.0 >Probing for PnP devices: >Probing for devices on the ISA bus: >sc0 on isa >sc0: VGA color <16 virtual consoles, flags=0x0> >atkbdc0 at 0x60-0x6f on motherboard >atkbd0 irq 1 on isa >psm0 irq 12 on isa >psm0: model Generic PS/2 mouse, device ID 0 >sio0: configured irq 4 not in bitmap of probed irqs 0 >sio0 not found at 0x3f8 >sio1 at 0x2f8-0x2ff irq 3 on isa >sio1: type 16550A >sio2: configured irq 5 not in bitmap of probed irqs 0x10 >sio2 at 0x3e8-0x3ef irq 5 on isa >sio2: type 16550A >sio3: configured irq 9 not in bitmap of probed irqs 0 >sio3 not found at 0x2e8 >fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa >fdc0: FIFO enabled, 8 bytes threshold >fd0: 1.44MB 3.5in >wdc0 at 0x1f0-0x1f7 irq 14 on isa >wdc0: unit 0 (wd0): <Maxtor 92049U6> >wd0: 19544MB (40026672 sectors), 39709 cyls, 16 heads, 63 S/T, 512 B/S >wdc1 at 0x170-0x177 irq 15 on isa >wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-5602B/1156>, removable, intr, >dma, iordy >acd0: drive speed 1377KB/sec, 256KB cache >acd0: supported read types: CD-R, CD-DA >acd0: Audio: play, 255 volume levels >acd0: Mechanism: ejectable tray >acd0: Medium: CD-ROM 120mm data disc loaded, unlocked >wt0 not found at 0x300 >mcd0 not found at 0x300 >matcdc0 not found at 0x230 >scd0 not found at 0x230 >ppc0 at 0x378 irq 7 flags 0x40 on isa >ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode >lpt0: <generic printer> on ppbus 0 >lpt0: Interrupt-driven port >ppi0: <generic parallel i/o> on ppbus 0 >plip0: <PLIP network interface> on ppbus 0 >1 3C5x9 board(s) on ISA found at 0x300 >ep0 at 0x300-0x30f irq 10 on isa >ep0: aui/utp[*UTP*] address 00:60:97:6b:55:80 >adv0 not found at 0x330 >bt: unit number (1) too high >bt1 not found at 0x334 >aha0 not found at 0x134 >vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa >npx0 on motherboard >npx0: INT 16 interface >Intel Pentium detected, installing workaround for F00F bug >Waiting 15 seconds for SCSI devices to settle >sa0 at bt0 bus 0 target 5 lun 0 >sa0: <ARCHIVE Python 28388-XXX 4.94> Removable Sequential Access SCSI-2 >device >sa0: 5.000MB/s transfers (5.000MHz, offset 15) >changing root device to wd0s2a > > > >----------------------- KERNEL >-------------------------------------------- ># Serial (COM) ports >device sio0 at isa? port "IO_COM1" tty irq 4 >device sio1 at isa? port "IO_COM2" tty irq 3 >device sio2 at isa? port "IO_COM3" tty irq 5 >device sio3 at isa? port "IO_COM4" tty irq 9 > ># Parallel port >device ppc0 at isa? port? flags 0x40 net irq 7 >controller ppbus0 # Parallel port bus (required) >device lpt0 at ppbus? # Printer >device plip0 at ppbus? # TCP/IP over parallel >device ppi0 at ppbus? # Parallel port interface device >#controller vpo0 at ppbus? # Requires scbus and da0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?386F8D9F.8BCF808D>