Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 17 Jan 2003 15:33:00 +0300
From:      "Sergey A. Osokin" <osa@freebsd.org.ru>
To:        Stelios Gasparis <gasparis@csd.uoc.gr>
Cc:        freebsd-multimedia@FreeBSD.ORG, freebsd-stable@FreeBSD.ORG
Subject:   Re: Problem with ESS Technology Allegro-1
Message-ID:  <20030117123300.GC2301@freebsd.org.ru>
In-Reply-To: <3E25D31C.3080704@csd.uoc.gr>
References:  <20030115104452.GA1474@freebsd.org.ru> <3E25D31C.3080704@csd.uoc.gr>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jan 15, 2003 at 11:31:08PM +0200, Stelios Gasparis wrote:
> Sergey A. Osokin wrote:
> >Hello,
> >I have a problem with ESS Technology Allegro-1 on HP
> >Omnibook 6100 (FreeBSD-4.7-RELEASE)
> >
> >>From /boot/loader.conf
> >snd_maestro3_load="YES"
> >
> >dmesg says:
> >pcm0: <ESS Technology Allegro-1> irq 5 at device 3.0 on pci2
> >pcm0: unable tp allocate register device
> >device_probe_and_attach: pcm0 attach returned 6
> >
> >In my kernel config file i haven't pcm or other sound-device
> >description. kldstat says that snd_pcm.ko successfully load
> >at boot time.
> >
> >Any idea?
> 
> Yes ... i had some problems with my xe3 notebook (4.7-STABLE). Well, 
> have you tried to unload and then load again the module? When i tried 
> that (i had just install 4.7-RELEASE), it worked.

Do not work for me.

> Back then i thought 
> that maestro module needs to be located before ntfs and other modules in 
> memory, but right now it works fine at any place:
> 
> $ dmesg|grep Preloaded
> Preloaded elf kernel "kernel" at 0xc033a000.
> Preloaded elf module "ntfs.ko" at 0xc033a09c.
> Preloaded elf module "snd_maestro3.ko" at 0xc033a138.
> Preloaded elf module "snd_pcm.ko" at 0xc033a1dc.
> Preloaded elf module "agp.ko" at 0xc033a27c.
> $ dmesg|grep pcm
> pcm0: <ESS Technology Allegro-1> port 0x2000-0x20ff irq 5 at device 3.0 
> on pci2

Yes, I tried to do this, can't resolve my problem.

> In my kernel config file i haven't pcm or other sound-devices either.
> 
> I know that this is weird, but it worked ... weird for me that every 
> time i boot, sound is enabled only at the right speaker. I have to 
> manually set the pcm volume to any value (using the 'mixer pcm 75' 
> command for example) in order to have stereo sound ... Any ideas?
>
> hope this helps, if you want any additional info, let me know.

Thanks for responce.

-- 

Rgdz,                        /"\  ASCII RIBBON CAMPAIGN
Sergey Osokin aka oZZ,       \ /    AGAINST HTML MAIL
http://ozz.pp.ru/             X          AND NEWS
                             / \

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030117123300.GC2301>