Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 16 Aug 2014 10:02:57 +0300
From:      Daniel Braniss <danny@cs.huji.ac.il>
To:        Hans Petter Selasky <hps@selasky.org>
Cc:        hackers@freebsd.org
Subject:   Re: Mellanox 10gb driver?
Message-ID:  <3E7F3970-0541-402F-B855-EDA299B5BBC1@cs.huji.ac.il>
In-Reply-To: <0E7861FF-AB45-421F-8BA0-0EAD02B85AF0@cs.huji.ac.il>
References:  <5FA0CF8C-2C93-4639-AA6C-40D3C278FE0F@cs.huji.ac.il> <53EDF13D.5050206@selasky.org> <0E7861FF-AB45-421F-8BA0-0EAD02B85AF0@cs.huji.ac.il>

next in thread | previous in thread | raw e-mail | index | archive | help

On Aug 16, 2014, at 9:53 AM, Daniel Braniss <danny@cs.huji.ac.il> wrote:

>=20
> On Aug 15, 2014, at 2:38 PM, Hans Petter Selasky <hps@selasky.org> =
wrote:
>=20
>> On 08/15/14 12:55, Daniel Braniss wrote:
>>> hi all,
>>> any idea if there is/will be a driver for:
>>>=20
>>> none3@pci0:5:0:0:       class=3D0x020000 card=3D0x005515b3 =
chip=3D0x100315b3 rev=3D0x00 hdr=3D0x00
>>>    vendor     =3D 'Mellanox Technologies'
>>>    device     =3D 'MT27500 Family [ConnectX-3]'
>>>    class      =3D network
>>>    subclass   =3D ethernet
>>>=20
>>=20
>> Hi,
>>=20
>> If you build the kernel using MK_OFED=3Dyes, your hardware is =
supported by the following modules:
>>=20
>> .if ${MK_OFED} !=3D "no" || defined(ALL_MODULES)
>> _mlx4=3D          mlx4
>> _mlx4ib=3D        mlx4ib
>> _mlxen=3D         mlxen
>> _mthca=3D         mthca
>> .endif
>>=20
>> You need to run latest -stable due to some compile issues which have =
been fixed.
>>=20
>> =97HPS
>=20
> hi,
>=20
> I added WITH_MK_OFED=3Dyes to the latest stable but no joy,  it=92s =
sill reported as none.
> is there some magic that i=92m missing?
> thanks,
> 	danny

some more info, if it helps:

pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib0: allocated type 3 (0xdf200000-0xdf3fffff) for rid 20 of pcib5
pcib0: allocated type 3 (0xd5000000-0xd57fffff) for rid 24 of pcib5
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   memory decode     0xdf200000-0xdf3fffff
pcib5:   prefetched decode 0xd5000000-0xd57fffff
pcib5:   special decode    ISA
pci5: <ACPI PCI bus> on pcib5
pci5: domain=3D0, physical bus=3D5
found-> vendor=3D0x15b3, dev=3D0x1003, revid=3D0x00
        domain=3D0, bus=3D5, slot=3D0, func=3D0
        class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
        cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D16 (dwords)
        lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
        intpin=3Da, irq=3D15
        powerspec 3  supports D0 D3  current D0
        MSI-X supports 128 messages in map 0x10
        map[10]: type Memory, range 64, base 0xdf300000, size 20, =
enabled
pcib5: allocated memory range (0xdf300000-0xdf3fffff) for rid 10 of =
pci0:5:0:0
        map[18]: type Prefetchable Memory, range 64, base 0xd5000000, =
size 23, enabled
pcib5: allocated prefetch range (0xd5000000-0xd57fffff) for rid 18 of =
pci0:5:0:0
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 35
pci5: <network, ethernet> at device 0.0 (no driver attached)




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E7F3970-0541-402F-B855-EDA299B5BBC1>