Date: Wed, 22 Feb 2012 15:43:54 +0100 From: Attila Nagy <bra@fsn.hu> To: pyunyh@gmail.com Cc: stable@freebsd.org Subject: Re: Fatal trap 19, Stopped at bge_init_locked+ and bge booting problems Message-ID: <4F44FF2A.9050505@fsn.hu> In-Reply-To: <20120223041516.GI6861@michelle.cdnetworks.com> References: <4F449E0B.2040909@fsn.hu> <20120223041516.GI6861@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 02/23/12 05:15, YongHyeon PYUN wrote: > bge0:<Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem > 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 > at device 0.0 on pci3 > bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E > ^^^^^^^^^^ > > This controller is new one. Probably BCM5719 A1 but not sure. Yes, it's in a new machine. > >> bge0: Try again > This message indicates your controller has ASF/IPMI firmware. > Try disabling ASF and see whether it makes any difference. > (Change hw.bge.allow_asf tunable to 0). Oh, I always forget that (on the other machines this is set). This is what I get with machdep.panic_on_nmi: 0 machdep.kdb_on_nmi: 0 hw.bge.allow_asf: 0 bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 at device 0.0 on pci3 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E bge0: Try again miibus0: <MII bus> on bge0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 3c:4a:92:b2:3c:08 pci0:3:0:1: failed to read VPD data. bge1: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6bc0000-0xf6bcffff,0xf6bb0000-0xf6bbffff,0xf6ba0000-0xf6baffff irq 36 at device 0.1 on pci3 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus1: <MII bus> on bge1 brgphy0: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 3c:4a:92:b2:3c:09 pci0:3:0:2: failed to read VPD data. bge2: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6b90000-0xf6b9ffff,0xf6b80000-0xf6b8ffff,0xf6b70000-0xf6b7ffff irq 32 at device 0.2 on pci3 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus2: <MII bus> on bge2 brgphy1: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: Ethernet address: 3c:4a:92:b2:3c:0a pci0:3:0:3: failed to read VPD data. bge3: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0xf6b60000-0xf6b6ffff,0xf6b50000-0xf6b5ffff,0xf6b40000-0xf6b4ffff irq 36 at device 0.3 on pci3 bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus3: <MII bus> on bge3 brgphy2: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge3: Ethernet address: 3c:4a:92:b2:3c:0b [...] da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C) NMI ISA 60, EISA ff I/O channel check, likely hardware failure.Sending DHCP Discover packet from interface bge0 (3c:4a:92:b2:3c:08) cd0 at ata3 bus 0 scbus3 target 0 lun 0 cd0: <HP DV-W28S-W G.W3> Removable CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed bge0: 11 link states coalesced bge0: link state changed to DOWN ugen0.2: <vendor 0x8087> at usbus0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 bge1: 5 link states coalesced bge1: link state changed to DOWN bge2: link state changed to DOWN bge3: link state changed to DOWN bge0: ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 2 link states coalesced bge0: link state changed to DOWN bge1: 4 link states coalesced bge1: link state changed to DOWN bge0: 4 link states coalesced bge0: link state changed to DOWN Sending DHCP Discover packet from interface bge1 (3c:4a:92:b2:3c:09) uhub3: 6 ports with 6 removable, self powered bge0: usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) 6 link states coalesced bge0: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN Sending DHCP Discover packet from interface bge2 (3c:4a:92:b2:3c:0a) bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT 10 link states coalesced bge1: link state changed to DOWN uhub4: 8 ports with 8 removable, self powered bge0: 4 link states coalesced bge0: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN Sending DHCP Discover packet from interface bge3 (3c:4a:92:b2:3c:0b) bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN ugen2.3: <vendor 0x0424> at usbus2 uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.a1, addr 3> on usbus2 bge0: watchdog timeout -- resetting bge0: link state changed to UP usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) bge1: 2 link states coalesced bge1: link state changed to DOWN uhub5: 2 ports with 1 removable, self powered bge0: link state changed to DOWN bge1: watchdog timeout -- resetting bge1: usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT 2 link states coalesced bge1: link state changed to DOWN bge0: 2 link states coalesced bge0: link state changed to DOWN ugen1.2: <HP> at usbus1 ukbd0: <Virtual Keyboard > on usbus1 kbd2 at ukbd0 ums0: <Virtual Mouse> on usbus1 bge1: 4 link states coalesced bge1: link state changed to DOWN bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN bge1: 3 link states coalesced bge1: link state changed to UP bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: link state changed to DOWN bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN bge1: 10 link states coalesced bge1: link state changed to DOWN bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN bge1: link state changed to UP bge0: watchdog timeout -- resetting bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: link state changed to DOWN bge1: watchdog timeout -- resetting bge1: 2 link states coalesced bge1: link state changed to DOWN bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN bge0: 4 link states coalesced bge0: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: 2 link states coalesced bge1: link state changed to DOWN bge0: 2 link states coalesced bge0: link state changed to DOWN bge1: link state changed to UP bge1: link state changed to DOWN [...] Still no go.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F44FF2A.9050505>