Date: Sat, 13 Apr 2002 02:14:28 +0200 From: "shadow" <Shadow@MailGenius.com> To: <freebsd-questions@freebsd.org> Subject: need some help with modem Message-ID: <000b01c1e280$336123e0$d241913e@amdpb574ln7fte>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
[-- Attachment #2 --]
Apr 12 16:30:37 ppp[109]: Phase: Using interface: tun0
Apr 12 16:30:37 ppp[109]: Phase: deflink: Created in closed state
Apr 12 16:30:37 ppp[109]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE)
Apr 12 16:30:37 ppp[109]: tun0: Command: default: set device /dev/cuaa0
Apr 12 16:30:37 ppp[109]: tun0: Command: default: set speed 115200
Apr 12 16:30:37 ppp[109]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT
Apr 12 16:30:37 ppp[109]: tun0: Command: default: set timeout 180
Apr 12 16:30:37 ppp[109]: tun0: Command: default: enable dns
Apr 12 16:30:37 ppp[109]: tun0: Phase: PPP Started (interactive mode).
Apr 12 16:30:39 ppp[109]: tun0: Command: /dev/tty: dial
Apr 12 16:30:39 ppp[109]: tun0: Phase: bundle: Establish
Apr 12 16:30:39 ppp[109]: tun0: Phase: deflink: closed -> opening
Apr 12 16:30:39 ppp[109]: tun0: Phase: deflink: Connected!
Apr 12 16:30:39 ppp[109]: tun0: Phase: deflink: opening -> dial
Apr 12 16:30:39 ppp[109]: tun0: Chat: deflink: Dial attempt 1 of 1
Apr 12 16:30:39 ppp[109]: tun0: Chat: Send: AT^M
Apr 12 16:30:39 ppp[109]: tun0: Chat: Expect(5): OK
Apr 12 16:30:44 ppp[109]: tun0: Chat: Expect timeout
Apr 12 16:30:44 ppp[109]: tun0: Chat: Send: AT^M
Apr 12 16:30:44 ppp[109]: tun0: Chat: Expect(5): OK
Apr 12 16:30:49 ppp[109]: tun0: Chat: Expect timeout
Apr 12 16:30:49 ppp[109]: tun0: Warning: Chat script failed
Apr 12 16:30:49 ppp[109]: tun0: Phase: deflink: dial -> hangup
Apr 12 16:30:49 ppp[109]: tun0: Phase: deflink: Disconnected!
Apr 12 16:30:49 ppp[109]: tun0: Phase: deflink: Connect time: 10 secs: 0 octets in, 0 octets out
Apr 12 16:30:49 ppp[109]: tun0: Phase: deflink: : 0 packets in, 0 packets out
Apr 12 16:30:49 ppp[109]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Fri Apr 12 16:30:49 2002
Apr 12 16:30:49 ppp[109]: tun0: Phase: deflink: hangup -> closed
Apr 12 16:30:49 ppp[109]: tun0: Phase: bundle: Dead
Apr 12 16:30:52 ppp[109]: tun0: Command: /dev/tty: quit
Apr 12 16:30:52 ppp[109]: tun0: Phase: PPP Terminated (normal).
[-- Attachment #3 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) processor (1390.75-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268435456 (262144K bytes)
avail memory = 256516096 (250504K bytes)
Preloaded elf kernel "kernel" at 0xc0496000.
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> at device 7.3 on pci0
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 7.4
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 7.5
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 7.6
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 7.7
pci0: <VGA-compatible display device> at 15.0
lnc0: <PCNet/PCI Ethernet adapter> port 0x1080-0x109f irq 9 at device 16.0 on pci0
lnc0: PCnet-PCI II address 00:50:56:50:74:a0
lnc0: driver is using old-style compatibility shims
orm0: <Option ROMs> at iomem 0xc0000-0xc5fff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
fdc0: <Intel 82077 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad0: 95396MB <VMware Virtual IDE Hard Drive> [193821/16/63] at ata0-master UDMA33
acd0: CDROM <VMware Virtual IDE CDROM Drive> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
[-- Attachment #4 --]
#################################################################
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.2.2.5 2001/07/13 10:55:23 brian Exp $
#################################################################
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device /dev/cuaa0
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 180 # 3 minute idle timer (the default)
enable dns # request DNS info (for resolv.conf)
papchap:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#
ISP:
set phone 223223
set login "TIMEOUT 5 login:-\\r-login: ppp word: qqq"
set timeout 120
set authname sup
set authkey 32535
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR # Add a (sticky) default route
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000b01c1e280$336123e0$d241913e>