From owner-freebsd-questions Tue Mar 11 15:30:04 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id PAA18874 for questions-outgoing; Tue, 11 Mar 1997 15:30:04 -0800 (PST) Received: from chow.cisco.com (chow.cisco.com [171.69.1.204]) by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id PAA18838 for ; Tue, 11 Mar 1997 15:29:59 -0800 (PST) From: raj@cisco.com Received: from rjohnson-home-ss20.cisco.com (rjohnson-home-ss20.cisco.com [171.69.113.50]) by chow.cisco.com (8.6.12/8.6.5) with ESMTP id PAA14080 for ; Tue, 11 Mar 1997 15:28:53 -0800 Received: from [127.0.0.1] ([127.0.0.1]) by rjohnson-home-ss20.cisco.com (8.6.8+c/CISCO.WS.1.1) with SMTP id PAA25326 for freebsd-questions@freebsd.org; Tue, 11 Mar 1997 15:28:53 -0800 Message-Id: <199703112328.PAA25326@rjohnson-home-ss20.cisco.com> X-Authentication-Warning: rjohnson-home-ss20.cisco.com: Host [127.0.0.1] didn't use HELO protocol To: freebsd-questions@freebsd.org Subject: Installing using 3COM Etherlink III PCMCIA card Date: Tue, 11 Mar 97 15:28:52 PST Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I'm having some problems getting the installation code to recognize my 3COM Etherlink III PCMCIA card. I have removed all other devices which I don't have from the configuration menu and I have set the IOBase address to 0x210 (which is what the card's diag's say it's set to) (the IRQ was already at 0xA) and yet it still doesn't appear in the list of network interfaces when I try to install from an FTP server. I tried to look quickly at the bootup messages to see if it's being recognized at all but the screen is cleared so quickly after printing it that I didn't have time to read the output. Suggestions? /raj ........................................................................... Restlessness and discontent are the first necessities of progress. - Thomas A. Edison