Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 5 Feb 2008 15:40:01 +0100
From:      Milan Obuch <freebsd-current@dino.sk>
To:        freebsd-current@freebsd.org
Subject:   Re: CFT: vr(4)
Message-ID:  <200802051540.01916.freebsd-current@dino.sk>
In-Reply-To: <20080204022334.GC27999@cdnetworks.co.kr>
References:  <20080204022334.GC27999@cdnetworks.co.kr>

next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 04 February 2008, Pyun YongHyeon wrote:
> Dear all,
>
> Here is overhauled vr(4) that shall address all known issues. PR
> database showed vr(4) is not stable enough under high load and
> link state handling didn't work as expected as well as its poor
> performance. I've tried hard to fix the bugs reported in PR
> database for several months. It tooked more time than I had
> planned when I received donated hardware.
> vr(4) will now
>  - work on all architectures.
>  - have better Rx performance.
>  - have more robust error recovery.
>  - reliably detect link state changes.
>  - support 32bit perfect multicast filtering for VT6105M.
>  - support WOL.
>
> It seems that the overhauled vr(4) runs well under my limited test
> environments. Several users already reported success. Because there
> are three kinds of Rhine family and lots of variants for the
> hardware, I'd like to hear feedback from users priror to commit.
> You can get the latest vr(4) at the following URL.
>
> http://people.freebsd.org/~yongari/vr/if_vr.c
> http://people.freebsd.org/~yongari/vr/if_vrreg.h
>
> I wouldn't be available for 7 ~ 10 days from Feb 5, so please don't
> expect quick reply.

Hi,

did anybody test Routerboard 44? It is quad network card, uses VT6105M chips 
as network controller (Via) and PCI6152 as PCI-PCI bridge (PLX Technology). 
With both stock if_vr and modified from site given above it partially works - 
interfaces are created, ifconfig works, but even pinging some host in local 
network (I achieve the effect with ping -f in a minue or so) hangs system. 
Nothing on my console, nothing in system log. Only hard powerdown restores 
system in functioning state.

I tested it with stock vr driver in both 6 and 7 stable on both i386 and 
amd64, and now with overhauled vr in 8 freshly cvsupped and two files 
replaced on i386.

If anybody has any idea or some patches I could test, I will.

Regards,
Milan

This is on console after kldload if_vr:

Feb  5 14:36:29 tix kernel: vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 
0x9c00-0x9cff mem 0xfceff000-0xfceff0ff irq 17 at device 8.0 on pci3
Feb  5 14:36:29 tix kernel: vr0: Quirks: 0x6
Feb  5 14:36:29 tix kernel: vr0: Revision: 0x96
Feb  5 14:36:29 tix kernel: miibus1: <MII bus> on vr0
Feb  5 14:36:29 tix kernel: ukphy0: <Generic IEEE 802.3u media interface> PHY 
1 on miibus1
Feb  5 14:36:29 tix kernel: ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 
100baseTX-FDX, auto
Feb  5 14:36:29 tix kernel: vr0: Ethernet address: 00:0c:42:02:38:a8
Feb  5 14:36:29 tix kernel: vr0: [ITHREAD]
Feb  5 14:36:29 tix kernel: vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 
0x9800-0x98ff mem 0xfcefe000-0xfcefe0ff irq 18 at device 9.0 on pci3
Feb  5 14:36:29 tix kernel: vr1: Quirks: 0x6
Feb  5 14:36:29 tix kernel: vr1: Revision: 0x96
Feb  5 14:36:29 tix kernel: miibus2: <MII bus> on vr1
Feb  5 14:36:29 tix kernel: ukphy1: <Generic IEEE 802.3u media interface> PHY 
1 on miibus2
Feb  5 14:36:29 tix kernel: ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 
100baseTX-FDX, auto
Feb  5 14:36:29 tix kernel: vr1: Ethernet address: 00:0c:42:02:38:a9
Feb  5 14:36:29 tix kernel: vr1: [ITHREAD]
Feb  5 14:36:29 tix kernel: vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 
0x9400-0x94ff mem 0xfcefd000-0xfcefd0ff irq 19 at device 10.0 on pci3
Feb  5 14:36:29 tix kernel: vr2: Quirks: 0x6
Feb  5 14:36:29 tix kernel: vr2: Revision: 0x96
Feb  5 14:36:29 tix kernel: miibus3: <MII bus> on vr2
Feb  5 14:36:29 tix kernel: ukphy2: <Generic IEEE 802.3u media interface> PHY 
1 on miibus3
Feb  5 14:36:29 tix kernel: ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 
100baseTX-FDX, auto
Feb  5 14:36:29 tix kernel: vr2: Ethernet address: 00:0c:42:02:38:aa
Feb  5 14:36:29 tix kernel: vr2: [ITHREAD]
Feb  5 14:36:29 tix kernel: vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 
0x9000-0x90ff mem 0xfcefc000-0xfcefc0ff irq 16 at device 11.0 on pci3
Feb  5 14:36:29 tix kernel: vr3: Quirks: 0x6
Feb  5 14:36:29 tix kernel: vr3: Revision: 0x96
Feb  5 14:36:29 tix kernel: miibus4: <MII bus> on vr3
Feb  5 14:36:29 tix kernel: ukphy3: <Generic IEEE 802.3u media interface> PHY 
1 on miibus4
Feb  5 14:36:29 tix kernel: ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 
100baseTX-FDX, auto
Feb  5 14:36:29 tix kernel: vr3: Ethernet address: 00:0c:42:02:38:ab
Feb  5 14:36:29 tix kernel: vr3: [ITHREAD]
Feb  5 14:36:29 tix kernel: vr0: link state changed to DOWN
Feb  5 14:36:29 tix kernel: vr1: link state changed to DOWN
Feb  5 14:36:29 tix kernel: vr2: link state changed to DOWN
Feb  5 14:36:29 tix kernel: vr3: link state changed to DOWN


-- 
Address this mail is sent from is used only for this mailing list.
Do not send any messages to it directly as a response, reply only
to mailing list. For mail to me personally, use milan in address instead.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200802051540.01916.freebsd-current>