From owner-freebsd-questions Tue Feb 27 02:26:03 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id CAA29507 for questions-outgoing; Tue, 27 Feb 1996 02:26:03 -0800 (PST) Received: from gateway.plessey.co.za (gateway.plessey.co.za [196.7.125.65]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id CAA29496 for ; Tue, 27 Feb 1996 02:25:55 -0800 (PST) Received: (from firewall@localhost) by gateway.plessey.co.za (8.6.11/8.6.11) id MAA04089 for ; Tue, 27 Feb 1996 12:26:24 +0200 Received: from fs6.plessey.co.za(196.7.125.130) by gateway.plessey.co.za via smap (V1.3) id sma004085; Tue Feb 27 12:25:54 1996 Received: from FS6/SpoolDir by fs6.plessey.co.za (Mercury 1.21); 27 Feb 96 12:25:21 GMT+0200 Received: from SpoolDir by FS6 (Mercury 1.21); 27 Feb 96 12:24:56 GMT+0200 From: "Peter Sieckmann" Organization: PLESSEY SOUTH AFRICA To: questions@freebsd.org Date: Tue, 27 Feb 1996 12:24:48 GMT+2 Subject: Drivers for onboard controller X-Confirm-Reading-To: "Peter Sieckmann" X-pmrqc: 1 Priority: normal X-mailer: Pegasus Mail/Windows (v1.22) Message-ID: <1C714B7CE0@fs6.plessey.co.za> Sender: owner-questions@freebsd.org Precedence: bulk Hi I am experiencing difficulties installing FreeBSD 2.1 on to a Compaq Prosignia 300 with the on-board SCSI controller. If I use the Adaptec 1542 with a third party Hard Drive - no problems. If I use the Adaptec 2940 (PCI) DOS sees it, FreeBSD does not. Ideally I would like to use the onboard SCSI with FreeBSD. If there is a driver for it, please let me know where I could get it. Regards Peter Sieckmann Peter Sieckmann Plessey South Africa 64/74 White Road Retreat 7945 Cape Town, South Africa Tel (27) (21) 7102464 Fax (27) (21) 721278 e-mail psieckma@plessey.co.za Fax (27) (21) 721278