Date: Thu, 31 Mar 2016 07:29:23 -0500 From: Erik Moe <e.moe@rcn.com> To: Daniel Braniss <danny@cs.huji.ac.il> Cc: freebsd-arm <freeBSD-arm@freebsd.org> Subject: Re: Odroidc1+ stuck booting Message-ID: <F5CCEBD7-0C43-415C-97E5-35BEC63BEDC6@rcn.com> In-Reply-To: <CCC86C18-EE51-4A24-A9A1-4FDCBB28B198@cs.huji.ac.il> References: <687E2129-BE66-4CC9-9B30-D8DFB7A2FEF6@cs.huji.ac.il> <982FE02C-7BEC-4CA0-BCAE-FE6CC5C9CFB4@rcn.com> <B39CD871-7BE5-44EA-816A-42A80E34D8A7@rcn.com> <EEAFAE63-3550-4862-924C-B8E7B68FC62E@cs.huji.ac.il> <CCC86C18-EE51-4A24-A9A1-4FDCBB28B198@cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
Everything I=E2=80=99m doing I =E2=80=9Cborrowed=E2=80=9D from here: = https://wiki.freebsd.org/FreeBSD/arm/Odroid-C1 I=E2=80=99m using the stock ODROIDC1 kernel config in head which builds = the FTD statically into the kernel from = src/sys/boot/fdt/dts/arm/odroidc1.dts. I liberated u-boot from = ArchLinuxARM-odroid-c1-latest.tar.gz. My boot.ini is simply this: ODROIDC-UBOOT-CONFIG setenv bootcmd "fatload mmc 0 0x100000 kernel.bin; go 0x100000" run bootcmd Erik > On Mar 31, 2016, at 1:36 AM, Daniel Braniss <danny@cs.huji.ac.il> = wrote: >=20 > oh, and if you feel generous your ODROIDC1.conf =E2=80=A6 > thanks, > danny >=20 >> On 31 Mar 2016, at 09:31, Daniel Braniss <danny@cs.huji.ac.il> wrote: >>=20 >> hi Erik, >> can you send me your >> uboot >> boot.ini >> *.dtb >> I=E2=80=99m pretty sure the issue is somewhere there then. >> thanks, >> danny >>=20 >>> On 31 Mar 2016, at 09:11, Erik Moe <e.moe@rcn.com> wrote: >>>=20 >>> I built a new image for my odriod-c1 for ssd from the latest sources = and had no issues and didn=E2=80=99t need to tweet anything. I don=E2=80=99= t have and odriod-c1+, but my understanding is there isn=E2=80=99t much = difference between the two. I am using the serial console. >>>=20 >>> = QA5:A;SVN:B72;POC:17F;STS:0;BOOT:0;INIT:10;BOOT:1;INIT:0;READ:0;CHECK:0;PA= SS:1; >>> = ----------------------------------------------------------------------- >>> * Welcome to Hardkernel's ODROID-C... (Built at 19:33:00 Dec 8 = 2014) * >>> = ----------------------------------------------------------------------- >>> CPU : AMLogic S805 >>> MEM : 1024MB (DDR3@792MHz) >>> BID : HKC13C0001 >>> S/N : HKC1CC037EBE4620 >>> 0x0000009f >>> check SD_boot_type:0x1 card_type:0x1 >>> Loading U-boot...success. >>>=20 >>>=20 >>> U-boot(odroidc@) (Jun 12 2015 - 17:31:14) >>>=20 >>> DRAM: 1 GiB >>> relocation Offset is: 2ff1c000 >>> MMC: SDCARD: 0, eMMC: 1 >>> IR init is done! >>> vpu clk_level =3D 3 >>> set vpu clk: 182150000Hz, readback: 182150000Hz(0x701) >>> mode =3D 6 vic =3D 4 >>> set HDMI vic: 4 >>> mode is: 6 >>> viu chan =3D 1 >>> config HPLL >>> config HPLL done >>> reconfig packet setting done >>> MMC read: dev # 0, block # 33984, count 12288 ... 12288 blocks read: = OK >>> There is no valid bmp file at the given address >>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>> Vendor: Man 035344 Snr 29cfee4e Rev: 8.0 Prod: SL08G >>> Type: Removable Hard Disk >>> Capacity: 7580.0 MB =3D 7.4 GB (15523840 x 512) >>> ------------------------------------------------------------ >>> Partition Start Sector Num Sectors Type >>> 1 1134 131040 6 >>> 2 132174 15391666 a5 >>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >>> Net: Meson_Ethernet >>> init suspend firmware done. (ret:0) >>> Hit Enter key to stop autoboot -- : 0 >>> exit abortboot: 0 >>> reading boot.ini >>>=20 >>> 98 bytes read >>> Loading boot.ini from mmc0:1 (vfat) >>> Executing the script... >>> setenv bootcmd "fatload mmc 0 0x100000 kernel.bin; go 0x100000" >>> run bootcmd >>> reading kernel.bin >>>=20 >>> 6055396 bytes read >>> ## Starting application at 0x00100000 ... >>> ARM Debug Architecture v7 >>> 2 watchpoints and 3 breakpoints supported >>> KDB: debugger backends: ddb >>> KDB: current backend: ddb >>> Copyright (c) 1992-2016 The FreeBSD Project. >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 >>> The Regents of the University of California. All rights = reserved. >>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>> FreeBSD 11.0-CURRENT #4 43026a8(master)-dirty: Thu Mar 31 04:14:32 = CDT 2016 >>> = root@dora:/usr/home/emoe/Projects/ARM/odroid-c1/obj/arm.armv6hf/usr/home/e= moe/Projects/ARM/src/sys/ODROIDC1 arm >>> FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based = on LLVM 3.8.0) >>> WARNING: WITNESS option enabled, expect reduced performance. >>> VT: init without driver. >>> Preloaded elf kernel "kernel" at 0xc07c5d6c. >>> CPU: Cortex A5 rev 1 (Cortex-A core) >>> Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 = Security_Ext >>> WB enabled LABT branch prediction disabled >>> LoUU:2 LoC:2 LoUIS:2 >>> Cache level 1: >>> 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc >>> 32KB/32B 2-way instruction cache Read-Alloc >>> real memory =3D 1073737728 (1023 MB) >>> avail memory =3D 1038233600 (990 MB) >>> Physical memory chunk(s): >>> 0x00001000 - 0x3fffffff, 1023 MB ( 262143 pages) >>> Excluded memory regions: >>> 0x00100000 - 0x00853fff, 7 MB ( 1876 pages) NoAlloc >>> Static device mappings: >>> 0xc1100000 - 0xc12fffff mapped at VA 0xffd00000 >>> 0xc4200000 - 0xc42fffff mapped at VA 0xffc00000 >>> 0xc4300000 - 0xc43fffff mapped at VA 0xffb00000 >>> 0xc8000000 - 0xc80fffff mapped at VA 0xffa00000 >>> 0xc8100000 - 0xc81fffff mapped at VA 0xff900000 >>> 0xc9000000 - 0xc97fffff mapped at VA 0xff100000 >>> 0xd9000000 - 0xd90fffff mapped at VA 0xff000000 >>> 0xda000000 - 0xda0fffff mapped at VA 0xfef00000 >>> Amlogic aml8726-m8b SoC >>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >>> ULE: setup cpu 0 >>> ULE: setup cpu 1 >>> ULE: setup cpu 2 >>> ULE: setup cpu 3 >>> random: entropy device external interface >>> null: <full device, null device, zero device> >>> openfirm: <Open Firmware control device> >>> mem: <memory> >>> nfslock: pseudo-device >>> crypto: <crypto core> >>> random: harvesting attach, 8 bytes (4 bits) from nexus0 >>> ofwbus0: <Open Firmware Device Tree> >>> simplebus0: <Flattened device tree simple bus> on ofwbus0 >>> random: harvesting attach, 8 bytes (4 bits) from simplebus0 >>> random: harvesting attach, 8 bytes (4 bits) from ofwbus0 >>> clkmsr0: <Amlogic aml8726 clkmsr> mem 0xc1108758-0xc1108767 on = simplebus0 >>> clkmsr0: bus clock 159 MHz >>> random: harvesting attach, 8 bytes (4 bits) from clkmsr0 >>> l2cache0: <PL310 L2 cache controller> mem 0xc4200000-0xc4200fff irq = 0 on ofwbus0 >>> l2cache0: Part number: 0x3, release: 0x9 >>> l2cache0: L2 Cache enabled: 512KB/32B 8 ways >>> l2cache0: Early BRESP response: disabled >>> l2cache0: Instruction prefetch: disabled >>> l2cache0: Data prefetch: enabled >>> l2cache0: Non-secure interrupt control: disabled >>> l2cache0: Non-secure lockdown: disabled >>> l2cache0: Share override: disabled >>> l2cache0: Double linefill: disabled >>> l2cache0: Instruction prefetch: disabled >>> l2cache0: Data prefetch: enabled >>> l2cache0: Double linefill on WRAP request: disabled >>> l2cache0: Prefetch drop: disabled >>> l2cache0: Incr double Linefill: disabled >>> l2cache0: Not same ID on exclusive sequence: disabled >>> l2cache0: Prefetch offset: 0 >>> random: harvesting attach, 8 bytes (4 bits) from l2cache0 >>> scu0: <ARM Snoop Control Unit> mem 0xc4300000-0xc4300fff on = simplebus0 >>> random: harvesting attach, 8 bytes (4 bits) from scu0 >>> cpuconfig0: <Amlogic CPU Config> mem 0xd901ff80-0xd901ff8f on = simplebus0 >>> random: harvesting attach, 8 bytes (4 bits) from cpuconfig0 >>> ccm0: <Amlogic aml8726 ccm> mem 0xc1104140-0xc1104153 on simplebus0 >>> random: harvesting attach, 8 bytes (4 bits) from ccm0 >>> pinctrl0: <Amlogic aml8726 pinctrl> mem = 0xc11080b0-0xc11080d7,0xc11080e8-0xc11080ff,0xc1108120-0xc1108137,0xc81000= 14-0xc8100017,0xc810002c-0xc810002f,0xc810002c-0xc810002f on simplebus0 >>> Processing 3 pin-config node(s) in pinctrl-0 for pinctrl@c11080b0 >>> Processing 1 pin-config node(s) in pinctrl-0 for mmc@c1108c20 >>> Processing 1 pin-config node(s) in pinctrl-0 for sdxc@c1108e00 >>> random: harvesting attach, 8 bytes (4 bits) from pinctrl0 >>> gic0: <ARM Generic Interrupt Controller> mem = 0xc4301000-0xc4301fff,0xc4300100-0xc43001ff on ofwbus0 >>> ofwbus0: no default resources for rid =3D 0, type =3D 1 >>> gic0: pn 0x390, arch 0x1, rev 0x1, implementer 0x43b irqs 256 >>> random: harvesting attach, 8 bytes (4 bits) from gic0 >>> wdt0: <Amlogic aml8726 WDT> mem 0xc1109900-0xc1109907 irq 2 on = simplebus0 >>> random: harvesting attach, 8 bytes (4 bits) from wdt0 >>> timer0: <Amlogic aml8726 timer> mem 0xc1109940-0xc1109957 irq 1 on = ofwbus0 >>> Event timer "aml8726 timer A" frequency 1000000 Hz quality 1000 >>> Timecounter "aml8726 timer E" frequency 1000000 Hz quality 1000 >>> random: harvesting attach, 8 bytes (4 bits) from timer0 >>> uart0: <Amlogic aml8726 UART> mem 0xc81004c0-0xc81004d7 irq 3 on = simplebus0 >>> uart0: RTS iflow, CTS oflow >>> uart0: console (115200,n,8,1) >>> uart0: fast interrupt >>> uart0: PPS capture mode: DCDinvalid >>> random: harvesting attach, 8 bytes (4 bits) from uart0 >>> uart1: <Amlogic aml8726 UART> mem 0xc11084c0-0xc11084d7 irq 4 on = simplebus0 >>> uart1: RTS iflow, CTS oflow >>> uart1: fast interrupt >>> uart1: PPS capture mode: DCDinvalid >>> random: harvesting attach, 8 bytes (4 bits) from uart1 >>> uart2: <Amlogic aml8726 UART> mem 0xc11084dc-0xc11084f3 irq 5 on = simplebus0 >>> uart2: RTS iflow, CTS oflow >>> uart2: fast interrupt >>> uart2: PPS capture mode: DCDinvalid >>> random: harvesting attach, 8 bytes (4 bits) from uart2 >>> uart3: <Amlogic aml8726 UART> mem 0xc1108700-0xc1108717 irq 6 on = simplebus0 >>> uart3: RTS iflow, CTS oflow >>> uart3: fast interrupt >>> uart3: PPS capture mode: DCDinvalid >>> random: harvesting attach, 8 bytes (4 bits) from uart3 >>> simplebus0: <i2c@c8100500> mem 0xc8100500-0xc810051f irq 7 disabled = compat amlogic,meson6-i2c (no driver attached) >>> aml8726_iic0: <Amlogic aml8726 I2C> mem 0xc1108500-0xc110851f irq 8 = on simplebus0 >>> iicbb0: <I2C bit-banging driver> on aml8726_iic0 >>> iicbus0: <Philips I2C bus> on iicbb0 master-only >>> iic0: <I2C generic I/O> on iicbus0 >>> random: harvesting attach, 8 bytes (4 bits) from iic0 >>> random: harvesting attach, 8 bytes (4 bits) from iicbus0 >>> random: harvesting attach, 8 bytes (4 bits) from iicbb0 >>> random: harvesting attach, 8 bytes (4 bits) from aml8726_iic0 >>> aml8726_iic1: <Amlogic aml8726 I2C> mem 0xc11087c0-0xc11087df irq 9 = on simplebus0 >>> iicbb1: <I2C bit-banging driver> on aml8726_iic1 >>> iicbus1: <Philips I2C bus> on iicbb1 master-only >>> iic1: <I2C generic I/O> on iicbus1 >>> random: harvesting attach, 8 bytes (4 bits) from iic1 >>> random: harvesting attach, 8 bytes (4 bits) from iicbus1 >>> random: harvesting attach, 8 bytes (4 bits) from iicbb1 >>> random: harvesting attach, 8 bytes (4 bits) from aml8726_iic1 >>> simplebus0: <ir-receiver@c8100480> mem 0xc8100480-0xc810049f irq 10 = disabled compat amlogic,meson6-ir (no driver attached) >>> simplebus0: <spi@c1108c80> mem 0xc1108c80-0xc1108cff disabled compat = amlogic,meson6-spifc (no driver attached) >>> simplebus0: <ethernet@c9410000> mem = 0xc9410000-0xc941ffff,0xc1108108-0xc110810b irq 11 disabled compat = amlogic,meson6-dwmac (no driver attached) >>> rtc0: <Amlogic aml8726 RTC> mem 0xc8100740-0xc8100753 irq 12 on = simplebus0 >>> rtc0: crystal oscillator check failed >>> device_attach: rtc0 attach returned 6 >>> gpio0: <Amlogic aml8726 GPIO> mem = 0xc8100024-0xc8100027,0xc8100024-0xc8100027,0xc8100028-0xc810002b on = simplebus0 >>> gpiobus0: <OFW GPIO bus> on gpio0 >>> gpioled0: <GPIO led> at pin 13 on gpiobus0 >>> random: harvesting attach, 8 bytes (4 bits) from gpioled0 >>> random: harvesting attach, 8 bytes (4 bits) from gpiobus0 >>> gpioc0: <GPIO controller> on gpio0 >>> random: harvesting attach, 8 bytes (4 bits) from gpioc0 >>> random: harvesting attach, 8 bytes (4 bits) from gpio0 >>> gpio1: <Amlogic aml8726 GPIO> mem = 0xc1108054-0xc1108057,0xc1108058-0xc110805b,0xc110805c-0xc110805f on = simplebus0 >>> gpiobus1: <OFW GPIO bus> on gpio1 >>> random: harvesting attach, 8 bytes (4 bits) from gpiobus1 >>> gpioc1: <GPIO controller> on gpio1 >>> random: harvesting attach, 8 bytes (4 bits) from gpioc1 >>> random: harvesting attach, 8 bytes (4 bits) from gpio1 >>> gpio2: <Amlogic aml8726 GPIO> mem = 0xc110806c-0xc110806f,0xc1108070-0xc1108073,0xc1108074-0xc1108077 on = simplebus0 >>> gpiobus2: <OFW GPIO bus> on gpio2 >>> random: harvesting attach, 8 bytes (4 bits) from gpiobus2 >>> gpioc2: <GPIO controller> on gpio2 >>> random: harvesting attach, 8 bytes (4 bits) from gpioc2 >>> random: harvesting attach, 8 bytes (4 bits) from gpio2 >>> aml8726_mmc0: <Amlogic aml8726 MMC> mem 0xc1108c20-0xc1108c3f irq 13 = on simplebus0 >>> mmc0: <MMC/SD bus> on aml8726_mmc0 >>> random: harvesting attach, 8 bytes (4 bits) from mmc0 >>> random: harvesting attach, 8 bytes (4 bits) from aml8726_mmc0 >>> aml8726_sdxc0: <Amlogic aml8726-m8 SDXC> mem 0xc1108e00-0xc1108e3b = irq 14 on simplebus0 >>> mmc1: <MMC/SD bus> on aml8726_sdxc0 >>> random: harvesting attach, 8 bytes (4 bits) from mmc1 >>> random: harvesting attach, 8 bytes (4 bits) from aml8726_sdxc0 >>> simplebus0: <rng@c1108100> mem 0xc1108100-0xc1108107 compat = amlogic,aml8726-rng (no driver attached) >>> usbphy0: <Amlogic aml8726-m8 USB PHY> mem 0xc1108800-0xc110881f on = simplebus0 >>> random: harvesting attach, 8 bytes (4 bits) from usbphy0 >>> usbphy1: <Amlogic aml8726-m8 USB PHY> mem 0xc1108820-0xc110883f on = simplebus0 >>> random: harvesting attach, 8 bytes (4 bits) from usbphy1 >>> dwcotg0: <DWC OTG 2.0 integrated USB controller> mem = 0xc9040000-0xc907ffff irq 15 on simplebus0 >>> usbus0 on dwcotg0 >>> dwcotg0: usbpf: Attached >>> random: harvesting attach, 8 bytes (4 bits) from usbus0 >>> random: harvesting attach, 8 bytes (4 bits) from dwcotg0 >>> dwcotg1: <DWC OTG 2.0 integrated USB controller> mem = 0xc90c0000-0xc90fffff irq 16 on simplebus0 >>> usbus1 on dwcotg1 >>> dwcotg1: usbpf: Attached >>> random: harvesting attach, 8 bytes (4 bits) from usbus1 >>> random: harvesting attach, 8 bytes (4 bits) from dwcotg1 >>> dwc0: <Amlogic Meson Gigabit Ethernet Controller> mem = 0xc9410000-0xc9411fff irq 11 on simplebus0 >>> miibus0: <MII bus> on dwc0 >>> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on = miibus0 >>> rgephy0: OUI 0x00e04c, model 0x0011, rev. 6 >>> rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto >>> random: harvesting attach, 8 bytes (4 bits) from rgephy0 >>> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on = miibus0 >>> rgephy1: OUI 0x00e04c, model 0x0011, rev. 6 >>> rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto >>> random: harvesting attach, 8 bytes (4 bits) from rgephy1 >>> random: harvesting attach, 8 bytes (4 bits) from miibus0 >>> dwc0: bpf attached >>> dwc0: Ethernet address: 62:73:64:5d:6a:ec >>> random: harvesting attach, 8 bytes (4 bits) from dwc0 >>> fb0: <Amlogic aml8726 FB> mem = 0xc8006048-0xc8006053,0xc1106800-0xc1106bff,0xc1107400-0xc11077ff irq = 17,18,19,20 on simplebus0 >>> fbd0 on fb0 >>> VT: initialize with new VT driver "fb". >>> random: harvesting attach, 8 bytes (4 bits) from fbd0 >>> random: harvesting attach, 8 bytes (4 bits) from fb0 >>> cpulist0: <Open Firmware CPU Group> on ofwbus0 >>> cpu0: <Open Firmware CPU> on cpulist0 >>> cpu0: missing 'clock-frequency' property >>> random: harvesting attach, 8 bytes (4 bits) from cpu0 >>> cpu1: <Open Firmware CPU> on cpulist0 >>> cpu1: missing 'clock-frequency' property >>> random: harvesting attach, 8 bytes (4 bits) from cpu1 >>> cpu2: <Open Firmware CPU> on cpulist0 >>> cpu2: missing 'clock-frequency' property >>> random: harvesting attach, 8 bytes (4 bits) from cpu2 >>> cpu3: <Open Firmware CPU> on cpulist0 >>> cpu3: missing 'clock-frequency' property >>> random: harvesting attach, 8 bytes (4 bits) from cpu3 >>> random: harvesting attach, 8 bytes (4 bits) from cpulist0 >>> ofwbus0: <clk@0> compat fixed-clock (no driver attached) >>> ofwbus0: <leds> compat gpio-leds (no driver attached) >>> cryptosoft0: <software crypto> >>> crypto: assign cryptosoft0 driver id 0, flags 100663296 >>> crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 >>> crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 >>> random: harvesting attach, 8 bytes (4 bits) from cryptosoft0 >>> procfs registered >>> Timecounters tick every 10.000 msec >>> tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192 >>> usbus0: 480Mbps High Speed USB v2.0 >>> IPsec: Initialized Security Association Processing. >>> lo0: bpf attached >>> mmc0: Probing bus >>> usbus1: 480Mbps High Speed USB v2.0 >>> mmc0: SD 2.0 interface conditions: OK >>> mmc0: SD probe: OK (OCR: 0x40ff8000) >>> mmc0: Current OCR: 0x00ff8000 >>> ugen1.1: <DWCOTG> at usbus1 >>> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on = usbus1 >>> ugen0.1: <DWCOTG> at usbus0 >>> uhub1: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on = usbus0 >>> mmc0: Probing cards >>> mmc0: New card detected (CID 035344534c3038478029cfee4e00f900) >>> mmc0: New card detected (CSD 400e00325b5900003b377f800a404000) >>> mmc0: Card at relative address 0xaaaa added: >>> mmc0: card: SDHC SL08G 8.0 SN 29CFEE4E MFG 09/2015 by 3 SD >>> mmc0: bus: 4bit, 50MHz, high speed timing >>> mmc0: memory: 15523840 blocks, erase sector 8192 blocks >>> mmc0: setting transfer rate to 39.750MHz (high speed timing) >>> mmcsd0: 8GB <SDHC SL08G 8.0 SN 29CFEE4E MFG 09/2015 by 3 SD> at mmc0 = 39.7MHz/4bit/8-block >>> random: harvesting attach, 8 bytes (4 bits) from mmcsd0 >>> mmc1: Probing bus >>> GEOM: new disk mmcsd0 >>> mmc0: setting bus width to 4 bits >>> GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 = bytes >>> GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 = bytes >>> mmc1: SD probe: failed >>> mmc1: MMC probe: failed >>> mmc1: Current OCR: 0x00000000 >>> mmc1: No compatible cards found on bus >>> Release APs >>> WARNING: WITNESS option enabled, expect reduced performance. >>> Trying to mount root from ufs:mmcsd0s2 []... >>> GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 = bytes >>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4E, MBR) is not aligned = on 4194304 bytes >>> GEOM_PART: partition 2 on (diskid/DISK-29CFEE4E, MBR) is not aligned = on 4194304 bytes >>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4Es2, BSD) is not = aligned on 4194304 bytes >>> warning: no time-of-day clock registered, system time will not be = set accurately >>> start_init: trying /sbin/init >>> uhub0: 1 port with 1 removable, self powered >>> random: harvesting attach, 8 bytes (4 bits) from uhub0 >>> uhub1: 1 port with 1 removable, self powered >>> random: harvesting attach, 8 bytes (4 bits) from uhub1 >>> ugen1.2: <vendor 0x05e3> at usbus1 >>> uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> = on usbus1 >>> uhub2: MTT enabled >>> Growing root partition to fill device >>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4E, MBR) is not aligned = on 4194304 bytes >>> GEOM_PART: partition 2 on (diskid/DISK-29CFEE4E, MBR) is not aligned = on 4194304 bytes >>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4Es2, BSD) is not = aligned on 4194304 bytes >>> mmcsd0s2 resized >>> growfs: superblock not recognized >>> /etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, = generating a new one >>> uhub2: 4 ports with 4 removable, self powered >>> random: harvesting attach, 8 bytes (4 bits) from uhub2 >>> Setting hostuuid: 214610b1-f72e-11e5-8203-df073412266c. >>> Setting hostid: 0x373425ad. >>> No suitable dump device was found. >>> Starting file system checks: >>> /dev/mmcsd0s2: FILE SYSTEM CLEAN; SKIPPING CHECKS >>> /dev/mmcsd0s2: clean, 36687 free (103 frags, 4573 blocks, 0.0% = fragmentation) >>> GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 = bytes >>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4E, MBR) is not aligned = on 4194304 bytes >>> GEOM_PART: partition 2 on (diskid/DISK-29CFEE4E, MBR) is not aligned = on 4194304 bytes >>> GEOM_PART: partition 1 on (diskid/DISK-29CFEE4Es2, BSD) is not = aligned on 4194304 bytes >>> Mounting local file systems:. >>> Setting hostname: freebsd. >>> Setting up = harvesting:[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,K= EYBOARD,ATTACH,CACHED >>> Feeding entropy:random: unblocking device. >>> . >>> dwc0: link state changed to DOWN >>> Starting Network: lo0 dwc0. >>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >>> options=3D600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> >>> inet6 ::1 prefixlen 128 >>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 >>> inet 127.0.0.1 netmask 0xff000000 >>> groups: lo >>> nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> >>> dwc0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 = mtu 1500 >>> options=3D80008<VLAN_MTU,LINKSTATE> >>> ether 62:73:64:5d:6a:ec >>> media: Ethernet autoselect (none) >>> status: no carrier >>> nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat >>> Starting devd. >>> add net fe80::: gateway ::1 >>> add net ff02::: gateway ::1 >>> add net ::ffff:0.0.0.0: gateway ::1 >>> add net ::0.0.0.0: gateway ::1 >>> Generating host.conf. >>> Waiting 30s for the default route interface: .....(no carrier) >>> Creating and/or trimming log files. >>> Starting syslogd. >>> Clearing /tmp (X related). >>> Updating motd:. >>> Mounting late file systems:. >>> Configuring vt: blanktime. >>> Generating RSA host key. >>> 2048 SHA256:efid4fCpKZlmdi69b18qj+SNx2mSPQNr6ourB/w9tPw root@freebsd = (RSA) >>> Generating ECDSA host key. >>> 256 SHA256:bpBVM0B9a3xDhmy3bvoC4OuELAJ4fvJd+p3tNwgia6k root@freebsd = (ECDSA) >>> Generating ED25519 host key. >>> 256 SHA256:VHMKoDA1Zv50CmxiLJwTIvg58S2DuBg6zj2VFXDGq/M root@freebsd = (ED25519) >>> Performing sanity check on sshd configuration. >>> Could not load host key: /etc/ssh/ssh_host_dsa_key >>> Starting sshd. >>> Could not load host key: /etc/ssh/ssh_host_dsa_key >>> Starting cron. >>> Starting background file system checks in 60 seconds. >>> lock order reversal: >>> 1st 0xc4499814 ufs (ufs) @ = /usr/home/emoe/Projects/ARM/src/sys/kern/vfs_subr.c:2498 >>> 2nd 0xd90169a0 bufwait (bufwait) @ = /usr/home/emoe/Projects/ARM/src/sys/ufs/ffs/ffs_vnops.c:263 >>> 3rd 0xc45c15d4 ufs (ufs) @ = /usr/home/emoe/Projects/ARM/src/sys/kern/vfs_subr.c:2498 >>> stack backtrace: >>> mount: /dev/mmcsd0s2: Device busy >>>=20 >>> Thu Mar 31 10:49:29 UTC 2016 >>>=20 >>> FreeBSD/arm (freebsd) (ttyu0) >>>=20 >>> login: >>>=20 >>>> On Mar 30, 2016, at 7:47 PM, Erik Moe <e.moe@rcn.com> wrote: >>>>=20 >>>> I was able to build a working odroid-c1 image not too long ago. = Let me pull the latest sources and see if something has changed. >>>>=20 >>>> Erik=20 >>>>=20 >>>>> On Mar 30, 2016, at 2:24 AM, Daniel Braniss <danny@cs.huji.ac.il> = wrote: >>>>>=20 >>>>> Hi, >>>>> Managed to make a bootable SD, cross compile world/kernel, >>>>> but the kernel startup gets stuck, I can=E2=80=99t even get into = the debugger. >>>>> any help/hints most welcome :-) >>>>> btw, I can also boot via the network, cutting down the debug cycle = considerably. >>>>> thanks, >>>>> danny >>>>> PS: here is the console output >>>>> <s1> >>>>> _______________________________________________ >>>>> freebsd-arm@freebsd.org mailing list >>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >>>>> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org" >>>> _______________________________________________ >>>> freebsd-arm@freebsd.org mailing list >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >>>> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org" >>>=20 >>=20 >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org" >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F5CCEBD7-0C43-415C-97E5-35BEC63BEDC6>