Date: Wed, 10 Feb 1999 13:02:22 -0600 From: Ade Lovett <ade@lovett.com> To: stable@FreeBSD.ORG Subject: More 3.0-STABLE woes Message-ID: <E10Aety-0003VH-00@hub.lovett.com>
next in thread | raw e-mail | index | archive | help
Add another one to the spontaneous reboots for 3.0-STABLE
Machine (512Mb dual Xeon/400) was fresh installed with 3.0-RELEASE,
cvsup to RELENG_3 as of 1900 CST 02/09/1999. Everything went fine
during the build, with no problems encountered, but since rebooting
into 3.0-STABLE, I'm experiencing effectively random crashes.
However, I can reproduce the problem completely by launching
enlightenment/gnome as my window manager.
Backtrace looks a little screwy, even when I install the debug-full
kernel without saving/stripping it.. machine has 512Mb of RAM and
a 768Mb swap partition.
System board is a Supermicro P6DGH with MPP level set to 1.1 in the
BIOS - setting it to 1.4 prevents the machine from booting at all.
Suggestions?
-aDe
---------------------------------------------------------------------------
-rw-r--r-- 1 root wheel 8103595 Feb 10 12:43 /var/crash/kernel.0
-rw------- 1 root wheel 536870912 Feb 10 12:43 /var/crash/vmcore.0
---------------------------------------------------------------------------
GDB is free software and you are welcome to distribute copies of it
under certain conditions; type "show copying" to see the conditions.
There is absolutely no warranty for GDB; type "show warranty" for details.
GDB 4.16 (i386-unknown-freebsd),
Copyright 1996 Free Software Foundation, Inc...
IdlePTD 2928640
initial pcb at 24d2e0
panicstr: isa_dmacheck: no physical page present
panic messages:
---
dmesg: kernel message buffer has different magic number
---
#0 boot (howto=Cannot access memory at address 0xfc1fbcc4.
) at ../../kern/kern_shutdown.c:285
285 dumppcb.pcb_cr3 = rcr3();
(kgdb)
---------------------------------------------------------------------------
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-STABLE #0: Wed Feb 10 12:37:53 CST 1999
root@banzai.lovett.com:/usr/src/sys/compile/BANZAI-SMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 536870912 (524288K bytes)
avail memory = 519663616 (507484K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xf02c1000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=8086 device=71a0)> rev 0x00 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=8086 device=71a1)> rev 0x00 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
chip4: <PCI to PCI bridge (vendor=8086 device=0960)> rev 0x03 on pci0.12.0
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> rev 0x00 int a irq 16 on pci0.14.0
ahc0: aic7896/97 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> rev 0x00 int a irq 16 on pci0.14.1
ahc1: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs
vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 17 on pci0.16.0
de0: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 18 on pci0.18.0
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:40:05:a3:cb:29
de1: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 19 on pci0.20.0
de1: 21140A [10-100Mb/s] pass 2.2
de1: address 00:40:05:37:26:be
Probing for devices on PCI bus 1:
Probing for devices on PCI bus 2:
Probing for PnP devices:
CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x07eb459a Comp ID: PNPb02f [0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP> sn 0x07eb459a) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pcm0 not found
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
isa_dmainit(2, 1024) failed
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, logging limited to 100 packets/entry
IP Filter: initialized. Default = pass all, Logging = enabled
Waiting 2 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
de0: enabling 100baseTX port
de1: enabling Full Duplex 100baseTX port
changing root device to da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34501W 0018> Fixed Direct Access SCSI-2 device
da0: 40.0MB/s transfers (20.0MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4339MB (8887200 512 byte sectors: 255H 63S/T 553C)
WARNING: / was not properly dismounted
cd0 at ahc1 bus 0 target 6 lun 0
cd0: <NEC CD-ROM DRIVE:464 1.05> Removable CD-ROM SCSI-2 device
cd0: 20.0MB/s transfers (20.0MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
---------------------------------------------------------------------------
# BANZAI-SMP: Dual Xeon/400 workstation
#
machine "i386"
ident BANZAI-SMP
maxusers 256
cpu "I686_CPU"
config kernel root on da0
options PQ_NOOPT
options SMP
options APIC_IO
options "NO_F00F_HACK"
options "COMPAT_43"
options USER_LDT
options SYSVSHM
options SYSVSEM
options SYSVMSG
options "MD5"
options KTRACE
options PERFMON
options UCONSOLE
options INET
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_FORWARD
options "IPFIREWALL_VERBOSE_LIMIT=100"
options IPDIVERT
options IPFILTER
options IPFILTER_LOG
options "ICMP_BANDLIM"
options FFS
options NFS
options "CD9660"
options PROCFS
options FFS_ROOT
options "P1003_1B"
options "_KPOSIX_PRIORITY_SCHEDULING"
options "_KPOSIX_VERSION=199309L"
options "AUTO_EOI_1"
pseudo-device ether
pseudo-device loop
pseudo-device bpfilter 4
pseudo-device pty 256
pseudo-device gzip
pseudo-device vn
pseudo-device splash
controller scbus0
device da0
device cd0
controller isa0
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device vga0 at isa? port ? conflicts
device sc0 at isa? tty
device npx0 at isa? port IO_NPX irq 13
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
device sio0 at isa? port "IO_COM1" tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
device apm0 at isa?
controller pnp0
device pcm0 at isa? port ? tty irq ? drq ?
controller pci0
controller ahc0
device de0
controller ppbus0
device nlpt0 at ppbus?
---------------------------------------------------------------------------
--
Ade Lovett, Austin, TX.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E10Aety-0003VH-00>