Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 11 Feb 2012 16:53:10 +0100
From:      "Arno J. Klaassen" <arno@heho.snv.jussieu.fr>
To:        freebsd-stable@freebsd.org
Cc:        freebsd-fs@freebsd.org
Subject:   9-stable : geli + one-disk ZFS fails
Message-ID:  <wpty2xcqop.fsf@heho.snv.jussieu.fr>

next in thread | raw e-mail | index | archive | help

Hello,


I finally decided to 'play' a bit with ZFS on a notebook, some years
old, but I installed a brand new disk and memtest passes OK.

I installed base+ports on partition 2, using 'classical' UFS.

I crypted partition 3 and created a single zpool on it containing
4 Z-"file-systems" :

 [root@cc ~]# zfs list
 NAME                      USED  AVAIL  REFER  MOUNTPOINT
 zfiles                   10.7G   377G   152K  /zfiles
 zfiles/home              10.6G   377G   119M  /zfiles/home
 zfiles/home/arno         10.5G   377G  2.35G  /zfiles/home/arno
 zfiles/home/arno/.priv    192K   377G   192K  /zfiles/home/arno/.priv
 zfiles/home/arno/.scito  8.18G   377G  8.18G  /zfiles/home/arno/.scito


I export the ZFS's via nfs and rsynced on the other machine some backup
of my current note-book (geli + UFS, (almost) same 9-stable version, no
problem) to the ZFS's.


Quite fast, I see on the notebook :


 [root@cc /usr/temp]# zpool status -v
   pool: zfiles
  state: ONLINE
 status: One or more devices has experienced an error resulting in data
         corruption.  Applications may be affected.
 action: Restore the file in question if possible.  Otherwise restore the
         entire pool from backup.
    see: http://www.sun.com/msg/ZFS-8000-8A
   scan: scrub repaired 0 in 0h1m with 11 errors on Sat Feb 11 14:55:34
   2012
 config: 
 
         NAME          STATE     READ WRITE CKSUM
         zfiles        ONLINE       0     0    11
           ada0s3.eli  ONLINE       0     0    23

 errors: Permanent errors have been detected in the following files:

         /zfiles/home/arno/.scito/contrib/XNAT.tar
 [root@cc /usr/temp]# md5 /zfiles/home/arno/.scito/contrib/XNAT.tar
 md5: /zfiles/home/arno/.scito/contrib/XNAT.tar: Input/output error
 [root@cc /usr/temp]#


As said, memtest is OK, nothing is logged to the console, UFS on the
same disk works OK (I did some tests copying and comparing random data)
and smartctl as well seems to trust the disk :

 SMART Self-test log structure revision number 1
 Num  Test_Description    Status                  Remaining  LifeTime(hours)
 # 1  Extended offline    Completed without error       00%       388
 # 2  Short offline       Completed without error       00%       387 


Am I doing something wrong and/or let me know what I could provide as
extra info to try to solve this (dmesg.boot at the end of this mail).

Thanx a lot in advance,

best, Arno



################### demsg.boot #######

Table 'FACP' at 0xbdd90200
Table 'APIC' at 0xbdd90390
APIC: Found table at 0xbdd90390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #0: Fri Feb  3 22:48:57 CET 2012
    toor@cc:/usr/obj/raid1/bsd/9/src/sys/VR603 amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bba000.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80bba200.
Calibrating TSC clock ... TSC clock: 2161296371 Hz
CPU: Intel(R) Pentium(R) Dual  CPU  T3400  @ 2.16GHz (2161.30-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 3221225472 (3072 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000095fff, 610304 bytes (149 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000000be9000 - 0x00000000b8402fff, 3078725632 bytes (751642 pages)
avail memory = 3057152000 (2915 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <MSI_NB MEGABOOK>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
x86bios:  IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff8000210000
x86bios: EBDA 0x099000-0x09ffff at 0xfffffe0000099000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf9420 00014 (v00 ACPIAM)
ACPI: RSDT 0xbdd90000 00048 (v01 MSI_NB MEGABOOK 20091013 MSFT 00000097)
ACPI: FACP 0xbdd90200 00084 (v01 MSI_NB MEGABOOK 20091013 MSFT 00000097)
ACPI: DSDT 0xbdd905c0 072D3 (v01  1ADTS 1ADTS012 00000012 INTL 20051117)
ACPI: FACS 0xbdd9e000 00040
ACPI: APIC 0xbdd90390 0006C (v01 MSI_NB MEGABOOK 20091013 MSFT 00000097)
ACPI: MCFG 0xbdd90400 0003C (v01 MSI_NB MEGABOOK 20091013 MSFT 00000097)
ACPI: SLIC 0xbdd90440 00176 (v01 MSI_NB MEGABOOK 20091013 MSFT 00000097)
ACPI: OEMB 0xbdd9e040 00072 (v01 MSI_NB MEGABOOK 20091013 MSFT 00000097)
ACPI: HPET 0xbdd9a5c0 00038 (v01 MSI_NB OEMHPET  20091013 MSFT 00000097)
ACPI: ASF! 0xbdd9a600 00099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
ACPI: GSCI 0xbdd9e0c0 02024 (v01 MSI_NB GMCHSCI  20091013 MSFT 00000097)
ACPI: SSDT 0xbdda0a50 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
io: <I/O>
null: <null device, zero device>
acpi0: <MSI_NB MEGABOOK> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bdd00000 (3) failed
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI Error: No handler for Region [EC__] (0xfffffe000178c700) [EmbeddedControl] (20110527/evregion-421)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110527/exfldio-310)
ACPI Error: Method parse/execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/psparse-560)
ACPI Error: Method execution failed [\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xfffffe0001792980), AE_NOT_EXIST (20110527/uteval-113)
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0xbdda04b0 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT 0xbdda0420 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5
  Validation          0    5   N     0  5
  After Disable       0  255   N     0  5
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   15   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   15   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 6 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    7   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 6 7 10 11 12 14 15
  Validation          0    3   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   14   N     0  3 4 6 7 10 11 12 14 15
  Validation          0   14   N     0  3 4 6 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xd0000-0xdffff
pcib0: decoding 3 range 0xbde00000-0xdfffffff
pcib0: decoding 3 range 0xf0000000-0xfed8ffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2a40, revid=0x07
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2a42, revid=0x07
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xfd800000, size 22, enabled
pcib0: allocated type 3 (0xfd800000-0xfdbfffff) for rid 10 of pci0:0:2:0
	map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib0: allocated type 3 (0xd0000000-0xdfffffff) for rid 18 of pci0:0:2:0
	map[20]: type I/O Port, range 32, base 0xb400, size  3, enabled
pcib0: allocated type 4 (0xb400-0xb407) for rid 20 of pci0:0:2:0
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2a43, revid=0x07
	domain=0, bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xfdd00000, size 20, enabled
pcib0: allocated type 3 (0xfdd00000-0xfddfffff) for rid 10 of pci0:0:2:1
found->	vendor=0x8086, dev=0x2937, revid=0x03
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xb800, size  5, enabled
pcib0: allocated type 4 (0xb800-0xb81f) for rid 20 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2938, revid=0x03
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=7
	map[20]: type I/O Port, range 32, base 0xb480, size  5, enabled
pcib0: allocated type 4 (0xb480-0xb49f) for rid 20 of pci0:0:26:1
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x293c, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfdefec00, size 10, enabled
pcib0: allocated type 3 (0xfdefec00-0xfdefefff) for rid 10 of pci0:0:26:7
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x293e, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfdef8000, size 14, enabled
pcib0: allocated type 3 (0xfdef8000-0xfdefbfff) for rid 10 of pci0:0:27:0
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found->	vendor=0x8086, dev=0x2940, revid=0x03
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->	vendor=0x8086, dev=0x2942, revid=0x03
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2946, revid=0x03
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2934, revid=0x03
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=14
	map[20]: type I/O Port, range 32, base 0xc000, size  5, enabled
pcib0: allocated type 4 (0xc000-0xc01f) for rid 20 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2935, revid=0x03
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0xbc00, size  5, enabled
pcib0: allocated type 4 (0xbc00-0xbc1f) for rid 20 of pci0:0:29:1
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2936, revid=0x03
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	map[20]: type I/O Port, range 32, base 0xb880, size  5, enabled
pcib0: allocated type 4 (0xb880-0xb89f) for rid 20 of pci0:0:29:2
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x293a, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=14
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfdeff000, size 10, enabled
pcib0: allocated type 3 (0xfdeff000-0xfdeff3ff) for rid 10 of pci0:0:29:7
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2448, revid=0x93
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2919, revid=0x03
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2929, revid=0x03
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0xcc00, size  3, enabled
pcib0: allocated type 4 (0xcc00-0xcc07) for rid 10 of pci0:0:31:2
	map[14]: type I/O Port, range 32, base 0xc880, size  2, enabled
pcib0: allocated type 4 (0xc880-0xc883) for rid 14 of pci0:0:31:2
	map[18]: type I/O Port, range 32, base 0xc800, size  3, enabled
pcib0: allocated type 4 (0xc800-0xc807) for rid 18 of pci0:0:31:2
	map[1c]: type I/O Port, range 32, base 0xc480, size  2, enabled
pcib0: allocated type 4 (0xc480-0xc483) for rid 1c of pci0:0:31:2
	map[20]: type I/O Port, range 32, base 0xc400, size  5, enabled
pcib0: allocated type 4 (0xc400-0xc41f) for rid 20 of pci0:0:31:2
	map[24]: type Memory, range 32, base 0xfdeff800, size 11, enabled
pcib0: allocated type 3 (0xfdeff800-0xfdefffff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2930, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=15
	map[10]: type Memory, range 64, base 0xfdeff400, size  8, enabled
pcib0: allocated type 3 (0xfdeff400-0xfdeff4ff) for rid 10 of pci0:0:31:3
	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
pcib0: allocated type 4 (0x400-0x41f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xb400-0xb407 mem 0xfd800000-0xfdbfffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci1: <VGA-compatible display> mem 0xfdd00000-0xfddfffff at device 2.1 on pci0
pci0: <serial bus, USB> at device 26.0 (no driver attached)
pci0: <serial bus, USB> at device 26.1 (no driver attached)
pci0: <serial bus, USB> at device 26.7 (no driver attached)
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib1
pcib0: allocated type 3 (0xfdf00000-0xfdffffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xf9f00000-0xf9ffffff) for rid 24 of pcib1
pcib1:   domain            0
pcib1:   secondary bus     2
pcib1:   subordinate bus   2
pcib1:   I/O decode        0xd000-0xdfff
pcib1:   memory decode     0xfdf00000-0xfdffffff
pcib1:   prefetched decode 0xf9f00000-0xf9ffffff
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
found->	vendor=0x10ec, dev=0x8168, revid=0x02
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 2 messages in map 0x20
	map[10]: type I/O Port, range 32, base 0xd800, size  8, enabled
pcib1: allocated I/O port range (0xd800-0xd8ff) for rid 10 of pci0:2:0:0
	map[18]: type Memory, range 64, base 0xfdfff000, size 12, enabled
pcib1: allocated memory range (0xfdfff000-0xfdffffff) for rid 18 of pci0:2:0:0
	map[20]: type Prefetchable Memory, range 64, base 0xf9ff0000, size 16, enabled
pcib1: allocated prefetch range (0xf9ff0000-0xf9ffffff) for rid 20 of pci0:2:0:0
pcib1: matched entry for 2.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib2
pcib0: allocated type 3 (0xfe000000-0xfeafffff) for rid 20 of pcib2
pcib0: allocated type 3 (0xfa000000-0xfcffffff) for rid 24 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     3
pcib2:   subordinate bus   4
pcib2:   I/O decode        0xe000-0xefff
pcib2:   memory decode     0xfe000000-0xfeafffff
pcib2:   prefetched decode 0xfa000000-0xfcffffff
pci3: <ACPI PCI bus> on pcib2
pci3: domain=0, physical bus=3
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib0: allocated type 3 (0xfeb00000-0xfebfffff) for rid 20 of pcib3
pcib3:   domain            0
pcib3:   secondary bus     5
pcib3:   subordinate bus   5
pcib3:   memory decode     0xfeb00000-0xfebfffff
pcib3:   no prefetched decode
pci5: <ACPI PCI bus> on pcib3
pci5: domain=0, physical bus=5
found->	vendor=0x168c, dev=0x001c, revid=0x01
	domain=0, bus=5, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	MSI-X supports 1 message in map 0x10
	map[10]: type Memory, range 64, base 0xfebf0000, size 16, enabled
pcib3: allocated memory range (0xfebf0000-0xfebfffff) for rid 10 of pci0:5:0:0
pcib3: matched entry for 5.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 19
pci5: <network, ethernet> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     1
pcib4:   subordinate bus   1
pcib4:   no prefetched decode
pcib4:   Subtractively decoded bridge.
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib4
pci1: domain=0, physical bus=1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9M AHCI SATA controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc41f mem 0xfdeff800-0xfdefffff irq 19 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (16 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
ahci0: using IRQ 256 for MSI
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM eSATA 4ports
ahci0: Caps2:
ahci0: EM Caps: ALHD XMT SMB LED
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps:
ahcich2: not probed (disabled)
ahcich3: not probed (disabled)
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps:
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps:
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 50
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 51
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 52
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 53
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 4 timers, legacy route
hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
hpet0:  t1: irqs 0x00f00000 (0)
hpet0:  t2: irqs 0x00f00800 (0)
hpet0:  t3: irqs 0x00f01000 (0)
Timecounter "HPET" frequency 14318180 Hz quality 950
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 54
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi0: wakeup code va 0xffffff80d4544000 pa 0x4000
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
ahcich0: AHCI reset...
ahcich0: SATA connect time=100us status=00000123
ahcich0: AHCI reset: device found
ahcich1: AHCI reset...
ahcich1: SATA offline status=00000004
ahcich1: AHCI reset: device not found
ahcich4: AHCI reset...
ahcich4: SATA offline status=00000004
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ahcich5: SATA connect time=900us status=00000113
ahcich5: AHCI reset: device found
ahcich5: AHCI reset: device ready after 0ms
(aprobe1:ahcich5:0:0:0): SIGNATURE: eb14
acpi_acad0: acline initialization start
battery0: battery initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ahcich5: SNTF 0x0001
ahcich0: AHCI reset: device ready after 100ms
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <ST95005620AS SD23> ATA-8 SATA 2.x device
GEOM: new disk cd0
pass0: Serial Number 5YX0J5YD
(cd0:ahcich5:0:0:0): SCSI status error
(cd0:ahcich5:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ahcich5:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich5:0:0:0): SCSI status: Check Condition
(cd0:ahcich5:0:0:0): SCSI sense: NOT READY asc:3a,2 (Medium not present - tray open)
(cd0:ahcich5:0:0:0): Error 6, Unretryable error
cd0 at ahcich5 bus 0 scbus3 target 0 lun 0
cd0: <Optiarc DVD RW AD-7560S SX01> Removable CD-ROM SCSI-0 device 
cd0: Serial Number 30651780 1165921Q111
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahcich5 bus 0 scbus3 target 0 lun 0
pass1: <Optiarc DVD RW AD-7560S SX01> Removable CD-ROM SCSI-0 device 
pass1: Serial Number 30651780 1165921Q111
pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
(cd0:ahcich5:0:0:0): SCSI status error
(cd0:ahcich5:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ahcich5:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich5:0:0:0): SCSI status: Check Condition
(cd0:ahcich5:0:0:0): SCSI sense: NOT READY asc:3a,2 (Medium not present - tray open)
(cd0:ahcich5:0:0:0): Error 6, Unretryable error
ada0: <ST95005620AS SD23> ATA-8 SATA 2.x device
ada0: Serial Number 5YX0J5YD
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
TSC timecounter disabled: C3 enabled.
Timecounter "TSC" frequency 2161296371 Hz quality -1000
(cd0:ahcich5:0:0:0): SCSI status error
(cd0:ahcich5:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ahcich5:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich5:0:0:0): SCSI status: Check Condition
(cd0:ahcich5:0:0:0): SCSI sense: NOT READY asc:3a,2 (Medium not present - tray open)
(cd0:ahcich5:0:battery0: battery initialization done, tried 1 times
0:0): Error 6, Unretryable error
(cd0:ahcich5:0:0:0): SCSI status error
(cd0:ahcich5:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ahcich5:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich5:0:0:0): SCSI status: Check Condition
(cd0:ahcich5:0:0:0): SCSI sense: NOT READY asc:3a,2 (Medium not present - tray open)
(cd0:ahcich5:0:0:0): Error 6, Unretryable error
GEOM: new disk ada0
GEOM: ada0s3: media size does not match label.
Trying to mount root from ufs:/dev/ada0s2a [rw,noatime]...
start_init: trying /sbin/init
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
(cd0:ahcich5:0:0:0): SCSI status error
(cd0:ahcich5:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ahcich5:0:0:0): CAM status: SCSI Status Error
(cd0:ahcich5:0:0:0): SCSI status: Check Condition
(cd0:ahcich5:0:0:0): SCSI sense: NOT READY asc:3a,2 (Medium not present - tray open)
(cd0:ahcich5:0:0:0): Error 6, Unretryable error
tap0: bpf attached
tap0: Ethernet address: 00:bd:0b:07:00:00
pci0: driver added
found->	vendor=0x8086, dev=0x2937, revid=0x03
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
pci0:0:26:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2938, revid=0x03
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=21
pci0:0:26:1: reprobing on driver added
found->	vendor=0x8086, dev=0x293c, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
	powerspec 2  supports D0 D3  current D0
pci0:0:26:7: reprobing on driver added
found->	vendor=0x8086, dev=0x293e, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=22
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2934, revid=0x03
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=23
pci0:0:29:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2935, revid=0x03
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=19
pci0:0:29:1: reprobing on driver added
found->	vendor=0x8086, dev=0x2936, revid=0x03
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
pci0:0:29:2: reprobing on driver added
found->	vendor=0x8086, dev=0x293a, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=23
	powerspec 2  supports D0 D3  current D0
pci0:0:29:7: reprobing on driver added
found->	vendor=0x8086, dev=0x2930, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
pci0:0:31:3: reprobing on driver added
pci1: driver added
pci2: driver added
found->	vendor=0x10ec, dev=0x8168, revid=0x02
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 2 messages in map 0x20
pci0:2:0:0: reprobing on driver added
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xf9ff0000-0xf9ffffff irq 16 at device 0.0 on pci2
re0: MSI count : 1
re0: MSI-X count : 2
re0: attempting to allocate 1 MSI-X vectors (2 supported)
msi: routing MSI-X IRQ 257 to local APIC 0 vector 55
re0: using IRQ 257 for MSI-X
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: OUI 0x00e04c, model 0x0011, rev. 2
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: bpf attached
re0: Ethernet address: 00:24:21:61:e0:20
pci3: driver added
pci5: driver added
found->	vendor=0x168c, dev=0x001c, revid=0x01
	domain=0, bus=5, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=19
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	MSI-X supports 1 message in map 0x10
pci0:5:0:0: reprobing on driver added
pci0: driver added
found->	vendor=0x8086, dev=0x2937, revid=0x03
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
pci0:0:26:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2938, revid=0x03
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=21
pci0:0:26:1: reprobing on driver added
found->	vendor=0x8086, dev=0x293c, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
	powerspec 2  supports D0 D3  current D0
pci0:0:26:7: reprobing on driver added
found->	vendor=0x8086, dev=0x293e, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=22
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2934, revid=0x03
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=23
pci0:0:29:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2935, revid=0x03
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=19
pci0:0:29:1: reprobing on driver added
found->	vendor=0x8086, dev=0x2936, revid=0x03
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
pci0:0:29:2: reprobing on driver added
found->	vendor=0x8086, dev=0x293a, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=23
	powerspec 2  supports D0 D3  current D0
pci0:0:29:7: reprobing on driver added
found->	vendor=0x8086, dev=0x2930, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
pci0:0:31:3: reprobing on driver added
pci1: driver added
pci2: driver added
pci3: driver added
pci5: driver added
found->	vendor=0x168c, dev=0x001c, revid=0x01
	domain=0, bus=5, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=19
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	MSI-X supports 1 message in map 0x10
pci0:5:0:0: reprobing on driver added
ath0: <Atheros 5424/2424> mem 0xfebf0000-0xfebfffff irq 19 at device 0.0 on pci5
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 56
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: AR2425 mac 14.2 RF5424 phy 7.0
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search
crypto: <crypto core>
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
GEOM_ELI: Device ada0s3.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
pci0: driver added
found->	vendor=0x8086, dev=0x2937, revid=0x03
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
pci0:0:26:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2938, revid=0x03
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=21
pci0:0:26:1: reprobing on driver added
found->	vendor=0x8086, dev=0x293c, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
	powerspec 2  supports D0 D3  current D0
pci0:0:26:7: reprobing on driver added
found->	vendor=0x8086, dev=0x293e, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=22
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2934, revid=0x03
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=23
pci0:0:29:0: reprobing on driver added
found->	vendor=0x8086, dev=0x2935, revid=0x03
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=19
pci0:0:29:1: reprobing on driver added
found->	vendor=0x8086, dev=0x2936, revid=0x03
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
pci0:0:29:2: reprobing on driver added
found->	vendor=0x8086, dev=0x293a, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=23
	powerspec 2  supports D0 D3  current D0
pci0:0:29:7: reprobing on driver added
found->	vendor=0x8086, dev=0x2930, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=18
pci0:0:31:3: reprobing on driver added
pci1: driver added
pci2: driver added
pci3: driver added
pci5: driver added
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est1 attach returned 6
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est1 attach returned 6
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est1 attach returned 6
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est1 attach returned 6
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Setting TjMax=100
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est0 attach returned 6
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Setting TjMax=100
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est1 attach returned 6




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?wpty2xcqop.fsf>