Date: Thu, 2 Sep 1999 21:39:37 +0300 From: =?iso-8859-9?B?RXJ0YW4gS/zn/Gtv8Gx1?= <ertank@softhome.net> To: <freebsd-newbies@FreeBSD.ORG> Subject: ppp setup (2) Message-ID: <001e01bef574$f7be2e00$aa93fcd4@Ertan> References: <020101bef269$9fa48600$857e03cb@jdy>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hello everbody, First of all I thank you for all your helps. At last I manage to setup my ppp connection files. But now have another problem. I can not use my modem to dial-up. I tried my best to setup my ppp connection but as usual I stuck. (Do not forget I am a newbie to FreeBSD.) I think the problem is because of my modem. It uses COM4 and IRQ 3 under DOS. But there is something diffrent in MYKERNEL file (I think). I have no idea how to setup or use parameters on this part of this configuration file. But I do not want to direct you wrong. I *think* the problem is this. I am *not* sure. I include my kernel configuration file and my ppp connection files attached. (Sorry I have Winzip under windows and do not know if gzip can handle files zipped with winzip so I attached files uncompressed.) I also include the result of "ppp -alias interactive" command. I have "interactive" part in my ppp.conf file. If you ask why I insist using "cuaa3" I have my own reasons. But if it is impossible to use then I try to use "cuaa0" or "cuaa1", but do not give up before trying. :-) I hope I do not forget to give any information required. Regards, Ertan Kucukoglu ertank@softhome.net [-- Attachment #2 --] # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.143.2.12 1999/05/14 15:12:26 jkh Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident MYKERNEL maxusers 32 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 #controller adv0 at isa? port ? cam irq ? controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? port "IO_COM3" tty irq 5 device sio3 at isa? port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x300 net irq 3 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 3 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter [-- Attachment #3 --] ################################################################ # PPP Configuration File ('/etc/ppp/ppp.conf') # # Default settings; These are always executed always when PPP # is invoked and apply to all system configurations. ################################################################ default: set device /dev/cuaa3 set speed 57600 disable pred1 deny pred1 disable lqr deny lqr set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0M0 OK-AT-OK\\dATDT\\T TIMEOUT 40 CONNECT" set redial 3 10 # # ################################################################ # # For interactive mode use this configuration: # # Invoke with `ppp -alias interactive` # ################################################################ interactive: set authname MY_AUTHNAME set authkey MY_AUTHKEY set phone 0,8222116004 set timeout 300 set openmode active accept chap # ################################################################ # # For demand-dial (automatic) mode we'll use this configuration: # # Invoke with: 'ppp -auto -alias demand' # ################################################################ demand: set authname ozlerplastik set authkey masterkey set phone 0,8222116004 set timeout 300 set openmode active accept chap set ifaddr 127.1.1.1/0 127.2.2.2/0 255.255.255.0 add 0 0 127.2.2.2 ################################################################ # End of /etc/ppp/ppp.conf [-- Attachment #4 --] ######################################################################### # PPP Link Up File ('/etc/ppp/ppp.linkup') # # This file is checked after PPP establishes a network connection. # # This file is searched in the following order. # # 1) First, the IP address assigned to us is searched and # the associated command(s) are executed. # # 2) If the IP Address is not found, then the label name # pecified at PPP startup time is searched and the associated # command(s) are executed. # # 3) If neither of the above are found then commands under # the label 'MYADDR:' are executed. # ######################################################################### # # This section is used for the "demand" configuration in # /etc/ppp/ppp.conf: demand: delete ALL add 0 0 HISADDR # # All other configurations in /etc/ppp/ppp.conf use this: # MYADDR: add 0 0 HISADDR ######################################################################## # End of /etc/ppp/ppp.linkup [-- Attachment #5 --] Working in interactive mode Using interface: tun0 ppp ON darkstar>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001e01bef574$f7be2e00$aa93fcd4>