Date: Fri, 22 Mar 2002 12:19:03 -0600 From: SNF <lists@stevenfettig.com> To: <freebsd-questions@freebsd.org> Subject: "ahc0: Someone reset channel A" - new FreeBSD 4.5 Install attempt - Help Message-ID: <B8C0D1B7.3F99%lists@stevenfettig.com>
next in thread | raw e-mail | index | archive | help
Hi all, I have an IBM Intellistation M Pro with dual PII 400 processors (256 MB Ram). It has an onboard Adaptec SCSI controller (AIC-7895 w/ bios 1.31) and I am currently attempting to do a fresh install with the latest install disc of FreeBSD 4.5. I get to a point where the beginning installer is probing the SCSI devices and an error pops up "ahc0: Someone reset channel A" around the time that the screen displays "waiting 15 seconds for SCSI devices to settle" - the error then ends in an eternal loop. I think we can assume the drive (a 9.1 GB Seagate) is in fine condition because it checks out okay via the SCSI setup/bios check and WinNT 4.0 (SP 6) is running fine on the system. I have no idea where to go from here. I searched the mail archives and also the usenet archives and found nothing that really related to the problem I am having. Any ideas on what is happening? (BTW, the hard drive is the only device attached to the SCSI onboard adapter. The CD-Rom drive is eide and runs off another controller. I have also tried controller A and B for the SCSI drive and get the same results. I have also looked for a bios update for the scsi controller and can't find anything relevant on Adaptec's site.) I would really appreciate any help. SF To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B8C0D1B7.3F99%lists>