Date: Sat, 30 Aug 2003 10:29:23 -0400 From: Robert Huff <roberthuff@rcn.com> To: questions@freebsd.org Subject: USB -> PS/2 Message-ID: <16208.46275.803581.692313@jerusalem.litteratus.org> In-Reply-To: <16208.36799.970894.848331@hyde.home.loc> References: <16208.36799.970894.848331@hyde.home.loc>
next in thread | previous in thread | raw e-mail | index | archive | help
Walter C. Pelissero writes:
> Although the keyboard works, the mouse doesn't. I tried to plug
> two types of mice (a Micro$oft 2 buttons and a Trust 3 buttons)
> but both, while generating traffic on the USB bus (the converter
> LED blinks), don't move the pointer.
<Hopping up and down in glee> Yes, yes, yes! Probably
different hardware (boot messages and output of "usbdevs -d -v"
appended) but _exact_ same symptoms. (Sorry to hear someone else is
afflicted, happy to hear it's not something I did.)
I had thought it might be because I am running it through a USB
kvm switch ... but WinME handles it perfectly.
Robert Huff
**************** boot probe ****************
ohci0: <SiS 5571 USB controller> mem 0xf2800000-0xf2800fff irq 5 at device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, bus powered
ukbd0: Tangtop Generic USBPS2, rev 1.10/0.01, addr 3, iclass 3/1
ums0: vendor 0x0d3d product 0x0001, rev 1.10/0.01, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
ohci1: <SiS 5571 USB controller> mem 0xf2000000-0xf2000fff irq 9 at device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
**************** usbdevs -d -v ****************
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00
uhub0
port 1 addr 2: full speed, power 100 mA, config 1, TUSB2046 hub(0x2046), Texas Instruments(0x0451), rev 1.25
uhub1
port 1 powered
port 2 powered
port 3 addr 3: low speed, power 100 mA, config 1, product 0x0001(0x0001), Tangtop(0x0d3d), rev 0.01
ukbd0
ums0
port 4 powered
port 2 powered
port 3 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00
uhub2
port 1 powered
port 2 powered
port 3 powered
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?16208.46275.803581.692313>