Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 10 May 1999 23:12:13 -0700
From:      "Mike Schmitt" <mike@dizzydev.com>
To:        "Daniel C. Sobral" <dcs@newsguy.com>
Cc:        <freebsd-stable@FreeBSD.ORG>
Subject:   RE: Booting 3.1
Message-ID:  <000a01be9b75$36443070$69ef6ed1@diz.dizx.com>
In-Reply-To: <3737B246.57C81D26@newsguy.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Good points, although on the first I can say nothing: after the F1 DOS F2
??? F3 BSD prompt (at which I hit F3), the system freezes.  Nothing else.

Pentium 233MMX, Tyan motherboard, 64mb RAM, single IDE hard disk partitioned
for DOS, Solaris for Intel, and FreeBSD.  Intel EtherExpress Pro & DEC PCI
network cards.  Mach64 video.  IDE CD ROM.  I'll make a note of the chipset
when I get access to the machine next.

As a test, we pulled out all the adapter cards except the video card, and
disconnected the CD ROM.  Same result.

Let me know what else to provide -- this is a mystery to me as well, as I've
installed BSD on several quite similar systems (Tyan motherboards, etc.) and
they've worked fine.

Thanks in advance!

Mike

> -----Original Message-----
> From: Daniel C. Sobral [mailto:dcs@newsguy.com]
> Sent: Monday, May 10, 1999 9:30 PM
> To: Mike Schmitt
> Cc: freebsd-stable@FreeBSD.ORG
> Subject: Re: Booting 3.1
>
>
> Mike Schmitt wrote:
> >
> > Hello,
> >
> > I'm trying to install 3.1-RELEASE on a Pentium 233MMX system.
> I boot off
> > the floppy, and can easily install the entire system off a network
> > connection.  After installation, though, the system boots, I
> hit F3 to get
> > FreeBSD to boot, and the entire system locks up tight.  Any
> ideas on how to
> > proceed?
>
> Begin by describing what you see during the entire boot process, and
> quoting the last few lines you see. FreeBSD bootstrapping is a
> many-stages process, and saying that it freezes doesn't give us the
> slightest clue on what is freezing.
>
> Second, describe your hardware. "Pentium 233MX" is *not* enough.
> Disk controllers, disks, ram memory, motherboard, chipset,
> everything you can provide. Usually, the problem is located in the
> one piece of information omitted.
>
> --
> Daniel C. Sobral			(8-DCS)
> dcs@newsguy.com
> dcs@freebsd.org
>
> 	"Proof of Trotsky's farsightedness is that _none_ of his
> predictions have come true yet."
>
>
>



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000a01be9b75$36443070$69ef6ed1>