Date: Sat, 28 Feb 2015 15:57:47 -0300 From: Luiz Otavio O Souza <lists.br@gmail.com> To: Trevor Roydhouse <trev@sentry.org> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: FreeBSD 10.1 / 11 on a Raspberry Pi B+ / 2 ? Message-ID: <CAB=2f8z%2B-ZTS=%2BgMcXjAGS7VEhX5bfuxJ61rv=2P9HFRsa1FWg@mail.gmail.com> In-Reply-To: <54F0F808.8030406@sentry.org> References: <b512debfc49e6e68ac725d0b03570f84.squirrel@ikornapostur.1984.is> <54F0F808.8030406@sentry.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 27 February 2015 at 20:04, Trevor Roydhouse wrote: > beastie@nawi.is wrote: >> >> At the moment I have ordered a version B+ and be interested whether X also >> could be configured using the above listed images (the link on the info >> page refers to another image) ? > > > The FreeBSD-10.1-STABLE-arm-armv6-RPI-B-20150217-r278906.img boots the B+ > but does not enable power to the USB (and therefore) LAN ports. No HDMI > video output unless forcing it with an entry in config.txt. > > The FreeBSD-11.0-CURRENT-arm-armv6-RPI-B-20150217-r278908.img boots the B+ > and mostly works except for: > > 1) The files rpi.dts (r276161) and bcm2835.dtsi (r278915) have not yet been > updated for the Raspberry Pi Model B+ GPIO pin mappings which are different > to the A and B models. It is not that simple, the loader needs to pass the correct dts for each board version. This seems to be included in recent firmware (since january). It probably means u-boot and crochet will need updates. Thanks for the report, I'll keep an eye on this (will try to get my hands on a B+ model). Luiz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB=2f8z%2B-ZTS=%2BgMcXjAGS7VEhX5bfuxJ61rv=2P9HFRsa1FWg>