Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 28 Feb 2015 15:57:47 -0300
From:      Luiz Otavio O Souza <lists.br@gmail.com>
To:        Trevor Roydhouse <trev@sentry.org>
Cc:        "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: FreeBSD 10.1 / 11 on a Raspberry Pi B+ / 2 ?
Message-ID:  <CAB=2f8z%2B-ZTS=%2BgMcXjAGS7VEhX5bfuxJ61rv=2P9HFRsa1FWg@mail.gmail.com>
In-Reply-To: <54F0F808.8030406@sentry.org>
References:  <b512debfc49e6e68ac725d0b03570f84.squirrel@ikornapostur.1984.is> <54F0F808.8030406@sentry.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On 27 February 2015 at 20:04, Trevor Roydhouse wrote:
> beastie@nawi.is wrote:
>>
>> At the moment I have ordered a version B+ and be interested whether X also
>> could be configured using the above listed images (the link on the info
>> page refers to another image) ?
>
>
> The FreeBSD-10.1-STABLE-arm-armv6-RPI-B-20150217-r278906.img boots the B+
> but does not enable power to the USB (and therefore) LAN ports. No HDMI
> video output unless forcing it with an entry in config.txt.
>
> The FreeBSD-11.0-CURRENT-arm-armv6-RPI-B-20150217-r278908.img boots the B+
> and mostly works except for:
>
> 1) The files rpi.dts (r276161) and bcm2835.dtsi (r278915) have not yet been
> updated for the Raspberry Pi Model B+ GPIO pin mappings which are different
> to the A and B models.

It is not that simple, the loader needs to pass the correct dts for
each board version.

This seems to be included in recent firmware (since january).

It probably means u-boot and crochet will need updates.

Thanks for the report, I'll keep an eye on this (will try to get my
hands on a B+ model).

Luiz



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB=2f8z%2B-ZTS=%2BgMcXjAGS7VEhX5bfuxJ61rv=2P9HFRsa1FWg>