Date: Thu, 27 Jan 2011 18:31:29 +0100 From: Damien Fleuriot <ml@my.gd> To: Jeremy Chadwick <freebsd@jdc.parodius.com> Cc: freebsd-stable@freebsd.org, "Vogel, Jack" <jack.vogel@intel.com>, freebsd-pf@freebsd.org Subject: Re: High interrupt rate on a PF box + performance Message-ID: <4D41ABF1.1010405@my.gd> In-Reply-To: <20110127172724.GA36587@icarus.home.lan> References: <4D41417A.20904@my.gd> <20110127172724.GA36587@icarus.home.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
On 1/27/11 6:27 PM, Jeremy Chadwick wrote: > On Thu, Jan 27, 2011 at 10:57:14AM +0100, Damien Fleuriot wrote: >> Hello list, >> >> I have a problem with interrupts, network cards, and PF performance. >> >> We have 2 firewalls running FreeBSD 8.0 for the current master and >> FreeBSD 8.1 for the backup host, which I upgraded just yesterday. >> >> [...] >> >> vmstat -i >> --- >> interrupt total rate >> irq14: ata0 36 0 >> irq16: mfi0 353244 1 >> irq21: uhci0 uhci+ 461504 1 >> cpu0: timer 615183815 1996 >> irq256: bce0 1015412475 3295 >> irq257: igb0 1067318584 3464 >> irq258: igb0 695648752 2258 >> irq259: igb0 2 0 >> irq260: igb1 11503857 37 >> irq261: igb1 506598 1 >> irq262: igb1 69 0 >> irq269: bce1 790820 2 >> cpu1: timer 615183757 1996 >> cpu2: timer 615197165 1996 >> cpu3: timer 615197165 1996 >> Total 5252757843 17050 > > There are changes to the igb(4) driver which are in RELENG_8 (8-STABLE), > and some which will be in the upcoming 8.2-RELEASE, which may address > this. Jack Vogel of Intel would be able to confirm for sure; CC'ing him > here. > > Could you please provide output from the following commands? > > * pciconf -lvcb (only include igbX entries, thanks) > * sysctl -a | grep msi > > Thanks. > > I can't help with the CARP-related issues or other stuff you're > experiencing. These issues may all be separate problems, hard to say. > igb0@pci0:14:0:0: class=0x020000 card=0x145a8086 chip=0x10d68086 rev=0x02 hdr=0x00 igb1@pci0:14:0:1: class=0x020000 card=0x145a8086 chip=0x10d68086 rev=0x02 hdr=0x00 igb2@pci0:15:0:0: class=0x020000 card=0x145a8086 chip=0x10d68086 rev=0x02 hdr=0x00 igb3@pci0:15:0:1: class=0x020000 card=0x145a8086 chip=0x10d68086 rev=0x02 hdr=0x00 hw.bce.msi_enable: 1 hw.pci.honor_msi_blacklist: 1 hw.pci.enable_msix: 1 hw.pci.enable_msi: 1 igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4> ether 00:1b:21:12:ec:38 inet [snip] netmask 0xffffffc0 broadcast [snip] media: Ethernet autoselect (1000baseT <full-duplex>) status: active igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4> ether 00:1b:21:12:ec:39 inet 10.0.0.252 netmask 0xffffff00 broadcast 10.0.0.255 media: Ethernet autoselect (1000baseT <full-duplex>) status: active Here you go :) Note that the igb2 and 3 interfaces are unused, unplugged, unconfigured
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D41ABF1.1010405>