Date: Fri, 18 Oct 2019 11:17:16 -0700 From: glenn <pygr@sonic.net> To: freebsd-arm@freebsd.org Subject: Re: ClearFog Base serial console on FreeBSD 11.2? Message-ID: <7478894E-DF5D-49D9-AFD5-4D6ADE1A2084@sonic.net> In-Reply-To: <CAPv3WKekue6o65EyBcbbH7nEUxUY4Yc6Mr6cpN-mUUzdJRRJCA@mail.gmail.com> References: <mailman.1601.1566068907.74383.freebsd-arm@freebsd.org> <D89D310F-551C-485B-93F8-13C51960A1CC@sonic.net> <CAPv3WKekue6o65EyBcbbH7nEUxUY4Yc6Mr6cpN-mUUzdJRRJCA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Marcin, Thank you for your quick response and suggestion, but it=E2=80=99s not = clear to me how to proceed. Attempts to compile (with dtc) the file = armada-388-gp.dts located in 11.2 sys/boot/fdt/dts/arm failed to include = files (like skeleton.dtsi and = dt-bindings/interrupt-controller/arm-gic.h) that weren=E2=80=99t there = but were in sys/gnu/dts. If dts files in 12.0 source are used to create dtb files, shouldn=E2=80=99= t those dtb files work with 11.2? I=E2=80=99ve also tried to get into a fresh install and boot of the OS = on the device via ssh, but without success. To that end, there is the = following /etc/rc.conf: hostname=3D=E2=80=9CFreeBSD11.2=E2=80=9D defaultrouter=3D=E2=80=9C10.137.113.1=E2=80=9D syslog_flags=3D=E2=80=9C-ss=E2=80=9D sshd_enable=3D=E2=80=9CYES=E2=80=9D ifconfig_mvneta0=3D=E2=80=9Cinet 10.137.113.200/24=E2=80=9D Pings to 10.137.113.200 fail as if nothing is there. Glenn > On Oct 17, 2019, at 4:03 PM, Marcin Wojtas <mw@semihalf.com> wrote: >=20 > Hi Glenn, >=20 > The release/11.2.0 is missing a huge amount of patches for a38x, which > were merged later. However the initial support should work - please > try dts from sys/boot/fdt/dts/arm/. At that time the port was not > compatible with the Linux bindings from sys/gnu/dts/arm. >=20 > Please let know if it helped. >=20 > Best regards, > Marcin >=20 > pt., 18 pa=C5=BA 2019 o 00:40 glenn <pygr@sonic.net> napisa=C5=82(a): >>=20 >> FreeBSD12.0 and 12.1 can be made to work properly on a ClearFog Base, = but so far, for 11.2, I haven=E2=80=99t been able to get an interactive = serial console after control is passed to the kernel during the boot = process. U-boot and ubldr.bin seem to work well. >>=20 >> ... >> U-Boot env: loaderdev not set, will probe all devices. >> Found U-Boot device: disk >> Probing all disk devices... >> Checking unit=3D0 slice=3D<auto> partition=3D<auto>... good. >> Booting from disk0s3a: >> /boot/kernel/kernel data=3D0x82c5e4+0xaba1c = syms=3D[0x4+0x8cd30+0x4+0xe2c1f] >> /boot/dtb/armada-388-clearfog.dtb size=3D0x675c >> Loading /boot/defaults/loader.conf >> / >> Hit [Enter] to boot immediately, or any other key for command prompt. >> Booting [/boot/kernel/kernel]... >> Using DTB from loaded file '/boot/dtb/armada-388-clearfog.dtb'. >> Kernel entry at 0xc00100... >> Kernel args: (null) >>=20 >>=20 >>=20 >> The reason for wanting to get 11.2 working is that, currently, = OPNsense doesn=E2=80=99t run on 12.0 or 12.1. >>=20 >> What does it take to get a serial console driver like uart-dev-snps.c = to work with 11.2? >>=20 >>=20 >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to = "freebsd-arm-unsubscribe@freebsd.org" >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7478894E-DF5D-49D9-AFD5-4D6ADE1A2084>