Date: Mon, 27 Oct 2003 15:34:34 +0200 From: Anton Savoschik <Savoschik@ukrpatent.org> To: freebsd-questions@freebsd.org Subject: Problem with Intel Pro/1000 MTQuad Port Server(82546EB) on motherboard Intel se7505VB2 and FreeBSD 5.1 Message-ID: <8124213597.20031027153434@ukrpatent.org>
next in thread | raw e-mail | index | archive | help
Hello! I use Intel Pro/1000 MTQuad Port Server(82546EB) NIC on motherboard Intel se7505VB2(two integrated NIC's 10/100 and 10/100/1000) and FreeBSD 5.1. With latest driver from Intel(em-1.7.16.tar.gz) FreeBSD recognized only two interfaces(em0, em1) instead fourth (device em2 belong to integrated 10/100/1000 NIC). Please help! Start-up system log: -----------------cut------------------------- Oct 27 11:13:10 /kernel: Hyperthreading: 2 logical CPUs Oct 27 11:13:10 /kernel: real memory = 2146893824 (2096576K bytes) Oct 27 11:13:10 /kernel: avail memory = 2088169472 (2039228K bytes) Oct 27 11:13:10 /kernel: Programming 24 pins in IOAPIC #0 Oct 27 11:13:10 /kernel: IOAPIC #0 intpin 2 -> irq 0 Oct 27 11:13:10 /kernel: Programming 24 pins in IOAPIC #1 Oct 27 11:13:10 /kernel: Programming 24 pins in IOAPIC #2 Oct 27 11:13:10 /kernel: FreeBSD/SMP: Multiprocessor motherboard Oct 27 11:13:10 /kernel: cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 Oct 27 11:13:10 /kernel: cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 Oct 27 11:13:10 /kernel: io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 Oct 27 11:13:10 /kernel: io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000 Oct 27 11:13:10 /kernel: io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400 Oct 27 11:13:10 /kernel: Preloaded elf kernel "kernel" at 0xc02ef000. Oct 27 11:13:10 /kernel: Pentium Pro MTRR support enabled Oct 27 11:13:10 /kernel: md0: Malloc disk Oct 27 11:13:10 /kernel: Using $PIR table, 21 entries at 0xc00fde70 Oct 27 11:13:10 /kernel: npx0: <math processor> on motherboard Oct 27 11:13:10 /kernel: npx0: INT 16 interface Oct 27 11:13:10 /kernel: pcib0: <Host to PCI bridge> on motherboard Oct 27 11:13:10 /kernel: IOAPIC #0 intpin 16 -> irq 2 Oct 27 11:13:10 /kernel: IOAPIC #0 intpin 19 -> irq 5 Oct 27 11:13:10 /kernel: IOAPIC #0 intpin 18 -> irq 10 Oct 27 11:13:10 /kernel: pci0: <PCI bus> on pcib0 Oct 27 11:13:10 /kernel: agp0: <Intel Generic host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 Oct 27 11:13:10 /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2551) at 0.1 Oct 27 11:13:10 /kernel: pcib1: <PCI to PCI bridge (vendor=8086 device=2552)> mem 0xf8000000-0xfbffffff at device 1.0 on pci0 Oct 27 11:13:10 /kernel: pci1: <PCI bus> on pcib1 Oct 27 11:13:10 /kernel: pcib2: <PCI to PCI bridge (vendor=8086 device=2553)> at device 2.0 on pci0 Oct 27 11:13:10 /kernel: pci2: <PCI bus> on pcib2 Oct 27 11:13:10 /kernel: pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 Oct 27 11:13:10 /kernel: pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2 Oct 27 11:13:10 /kernel: pci3: <PCI bus> on pcib3 Oct 27 11:13:10 /kernel: pcib4: <PCI to PCI bridge (vendor=1014 device=01a7)> at device 2.0 on pci3 Oct 27 11:13:10 /kernel: IOAPIC #1 intpin 6 -> irq 11 Oct 27 11:13:10 /kernel: IOAPIC #1 intpin 7 -> irq 16 Oct 27 11:13:10 /kernel: pci4: <PCI bus> on pcib4 Oct 27 11:13:10 /kernel: em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x7000-0x703f mem 0xf0200000-0xf021ffff irq 11 at device 6.0 on pci4 Oct 27 11:13:10 /kernel: em0: Speed:N/A Duplex:N/A Oct 27 11:13:10 /kernel: em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x7040-0x707f mem 0xf0220000-0xf023ffff irq 16 at device 6.1 on pci4 Oct 27 11:13:10 /kernel: em1: Speed:N/A Duplex:N/A Oct 27 11:13:10 /kernel: pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 Oct 27 11:13:10 /kernel: pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2 Oct 27 11:13:10 /kernel: pci5: <PCI bus> on pcib5 Oct 27 11:13:10 /kernel: em2: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x8000-0x803f mem 0xf0300000-0xf031ffff irq 11 at device 2.0 on pci5 Oct 27 11:13:10 /kernel: em2: Speed:N/A Duplex:N/A Oct 27 11:13:10 /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x2554) at 2.1 Oct 27 11:13:10 /kernel: pci0: <UHCI USB controller> at 29.0 irq 2 Oct 27 11:13:10 /kernel: pci0: <UHCI USB controller> at 29.1 irq 5 Oct 27 11:13:10 /kernel: pci0: <UHCI USB controller> at 29.2 irq 10 Oct 27 11:13:10 /kernel: pcib6: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 Oct 27 11:13:10 /kernel: pci6: <PCI bus> on pcib6 Oct 27 11:13:10 /kernel: pci6: <ATI Mach64-GR graphics accelerator> at 2.0 irq 17 Oct 27 11:13:10 /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x9400-0x943f mem 0xf0420000-0xf043ffff,0xf0401000-0xf0401fff irq 10 at device 3.0 on pci6 Oct 27 11:13:10 /kernel: fxp0: Ethernet address 00:04:23:46:aa:c5 Oct 27 11:13:10 /kernel: inphy0: <i82555 10/100 media interface> on miibus0 Oct 27 11:13:10 /kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Oct 27 11:13:10 /kernel: isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0 Oct 27 11:13:10 /kernel: isa0: <ISA bus> on isab0 Oct 27 11:13:10 /kernel: atapci0: <Intel ICH4 ATA100 controller> port 0x6860-0x686f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 Oct 27 11:13:10 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Oct 27 11:13:10 /kernel: ata1: at 0x170 irq 15 on atapci0 Oct 27 11:13:10 /kernel: pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 0 Oct 27 11:13:10 /kernel: orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe2000-0xe27ff on isa0 -----------------cut-------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8124213597.20031027153434>