Date: Fri, 25 Jul 2014 20:39:27 -0300 From: Marcelo Gondim <gondim@bsdinfo.com.br> To: FreeBSD Net <freebsd-net@freebsd.org> Subject: IPv6 alias do not respond from outside Message-ID: <53D2EAAF.8070707@bsdinfo.com.br>
next in thread | raw e-mail | index | archive | help
Dear,
I'm having the following problem:
Host A (my network):
===================
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether 00:1e:67:30:ea:27
inet 186.xxx.48.3 netmask 0xffffffe0 broadcast 186.xxx.48.31
inet6 fe80::21e:67ff:fe30:ea27%em0 prefixlen 64 scopeid 0x1
inet6 2805:xxxx:dead::3 prefixlen 64
inet 186.xxx.48.4 netmask 0xffffffff broadcast 186.xxx.48.4
inet 186.xxx.48.5 netmask 0xffffffff broadcast 186.xxx.48.5
inet6 2805:xxxx:dead::5 prefixlen 64
inet6 2805:xxxx:dead::4 prefixlen 64
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
Router (Internet):
===============
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=303<RXCSUM,TXCSUM,TSO4,TSO6>
ether 00:1b:21:89:25:32
inet 186.xxx.48.1 netmask 0xffffffe0 broadcast 186.xxx.48.31
inet6 fe80::21b:21ff:fe89:2532%vlan0 prefixlen 64 scopeid 0x10
inet6 2805:xxxx:dead::1 prefixlen 64
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (10Gbase-SR <full-duplex>)
status: active
vlan: 3081 parent interface: ix0
Host B (Datacenter OVH):
======================
eth0 Link encap:Ethernet HWaddr 00:27:0e:36:67:ae
inet addr:91.xxx.115.215 Bcast:91.xxx.115.255 Mask:255.255.255.0
inet6 addr: fe80::227:eff:fe36:67ae/64 Scope:Link
inet6 addr: 2001:xxxx:1:aad7::1/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:680611577 errors:0 dropped:115467 overruns:0 frame:0
TX packets:410997111 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:929626301412 (865.7 GiB) TX bytes:28858569748 (26.8
GiB)
If I try to ping the origin Host Bto destination 2805:xxxx:dead::3, I
get an answer correctly:
(hostb)# ping6 2805:xxxx:dead::3
PING 2805:xxxx:dead::3(2805:xxxx:dead::3) 56 data bytes
64 bytes from 2805:xxxx:dead::3: icmp_seq=1 ttl=55 time=219 ms
64 bytes from 2805:xxxx:dead::3: icmp_seq=2 ttl=55 time=218 ms
64 bytes from 2805:xxxx:dead::3: icmp_seq=3 ttl=55 time=219 ms
64 bytes from 2805:xxxx:dead::3: icmp_seq=4 ttl=55 time=218 ms
But it does not ping 2805:xxxx:dead::4 and 2805:xxxx:dead::5:
(hostb)# ping6 2805:xxxx:dead::4
PING 2805:xxxx:dead::4(2805:xxxx:dead::4) 56 data bytes
From 2001:xxxx:2001:1001::96 icmp_seq=2 Destination unreachable:
Address unreachable
From 2001:xxxx:2001:1001::96 icmp_seq=8 Destination unreachable:
Address unreachable
Now if I do a ping from the router to Host A, it goes to work:
(router)# ping6 2805:xxxx:dead::4
PING6(56=40+8+8 bytes) 2805:xxxx:dead::1 --> 2805:xxxx:dead::4
16 bytes from 2805:xxxx:dead::4, icmp_seq=0 hlim=64 time=13.550 ms
16 bytes from 2805:xxxx:dead::4, icmp_seq=1 hlim=64 time=7.776 ms
(hostb)# ping6 2805:xxxx:dead::4
PING 2805:xxxx:dead::4(2805:xxxx:dead::4) 56 data bytes
64 bytes from 2805:xxxx:dead::4: icmp_seq=1 ttl=56 time=219 ms
64 bytes from 2805:xxxx:dead::4: icmp_seq=2 ttl=56 time=218 ms
64 bytes from 2805:xxxx:dead::4: icmp_seq=3 ttl=56 time=219 ms
Why work now?
FreeBSD xxxxx 10.0-STABLE FreeBSD 10.0-STABLE #10 r267839: Thu Jul 10
15:35:04 BRT 2014 root@xxxxx:/usr/obj/usr/src/sys/GONDIM amd64
Thanks and best regards,
Gondim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53D2EAAF.8070707>