Date: Mon, 22 Jun 2009 16:28:40 +0100 From: Anton Shterenlikht <mexas@bristol.ac.uk> To: freebsd-ia64@freebsd.org Subject: Re: installing from CD Message-ID: <20090622152840.GA7350@mech-cluster238.men.bris.ac.uk> In-Reply-To: <20090622151545.GA7200@mech-cluster238.men.bris.ac.uk> References: <20090619132201.GA83507@mech-cluster238.men.bris.ac.uk> <4DE8B19B-C54F-41B5-84CA-CF3118A667B5@mac.com> <20090622151545.GA7200@mech-cluster238.men.bris.ac.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
I wonder if having correct EFI mapping is critical for the FBSD installation program. I've 3 scsi disks in rx2600. I think only one disk is mapped: fs0:\> map Device mapping table fs0 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part1,Sig342C0E17-5BEC-11 DE-90A4-00110A31D6EC) blk0 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master) blk1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0) blk2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0) blk3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)/HD(Part1,Sig00000000) blk4 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0) blk5 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part1,Sig342C0E17-5BEC-11 DE-90A4-00110A31D6EC) blk6 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part2,Sig342C0E44-5BEC-11 DE-90A4-00110A31D6EC) blk7 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part3,Sig342C0E70-5BEC-11 DE-90A4-00110A31D6EC) blk8 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part4,Sig342C0E9D-5BEC-11 DE-90A4-00110A31D6EC) blk9 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part5,Sig342C0ECA-5BEC-11 DE-90A4-00110A31D6EC) blkA : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD(Part6,Sig342C0EF4-5BEC-11 DE-90A4-00110A31D6EC) fs0:\> Should I `map' the other two? -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 928 8233 Fax: +44 (0)117 929 4423
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090622152840.GA7350>