Date: Mon, 1 Mar 2010 11:02:32 +0200 From: Omer Faruk Sen <omerfsen@gmail.com> To: FreeBSD <freebsd-questions@freebsd.org>, freebsd-scsi@freebsd.org Subject: IBM DS4800 Storage Message-ID: <75a268721003010102n4e1cc375qdbd8f3b2acb96c40@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi , Is there anyone here that have used SAN against IBM DS4800 (Fiber). I can see disk but i can't fdisk it. # camcontrol devlist -v scbus0 on isp0 bus 0: < > at scbus0 target -1 lun -1 () scbus1 on isp1 bus 0: <IBM 1815 FAStT 0914> at scbus1 target 0 lun 6 (pass0,da0) < > at scbus1 target -1 lun -1 () scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) fdisk /dev/da0 fdisk: could not detect sector size and dmesg output when system boots: registered firmware set <isp_1040> registered firmware set <isp_1040_it> registered firmware set <isp_1080> registered firmware set <isp_1080_it> registered firmware set <isp_12160> registered firmware set <isp_12160_it> registered firmware set <isp_2100> registered firmware set <isp_2200> registered firmware set <isp_2300> registered firmware set <isp_2322> registered firmware set <isp_2400> isp0: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x6000-0x60ff mem 0xc7efc000-0xc7efffff irq 17 at device 0.0 on pci36 isp0: [ITHREAD] isp0: Board Type 2422, Chip Revision 0x3, loaded F/W Revision 4.0.20 isp1: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x7000-0x70ff mem 0xc5ffc000-0xc5ffffff irq 18 at device 0.0 on pci7 isp1: [ITHREAD] isp1: Board Type 2422, Chip Revision 0x3, loaded F/W Revision 4.0.20 vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xd0000000-0xd7ffffff,0xdfff0000-0xdfffffff irq 22 at device 6.0 on pci1 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 isp1: 0.0.2 FCP RESPONSE: 0x2 and afterwards: (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 10 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 80 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error isp1: 0.0.6 FCP RESPONSE: 0x2 (da0:isp1:0:0:6): Synchronize cache failed, status == 0x59, scsi status == 0x0 (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error isp1: 0.0.6 FCP RESPONSE: 0x2 (da0:isp1:0:0:6): Synchronize cache failed, status == 0x59, scsi status == 0x0 (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error isp1: 0.0.6 FCP RESPONSE: 0x2 (da0:isp1:0:0:6): Synchronize cache failed, status == 0x59, scsi status == 0x0 (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error isp1: 0.0.6 FCP RESPONSE: 0x2 (da0:isp1:0:0:6): Synchronize cache failed, status == 0x59, scsi status == 0x0 (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error isp1: 0.0.6 FCP RESPONSE: 0x2 (da0:isp1:0:0:6): Synchronize cache failed, status == 0x59, scsi status == 0x0 (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error isp1: 0.0.6 FCP RESPONSE: 0x2 (da0:isp1:0:0:6): Synchronize cache failed, status == 0x59, scsi status == 0x0 (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error isp1: 0.0.6 FCP RESPONSE: 0x2 (da0:isp1:0:0:6): Synchronize cache failed, status == 0x59, scsi status == 0x0 (da0:isp1:0:0:6): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:isp1:0:0:6): CAM Status: SCSI Status Error (da0:isp1:0:0:6): SCSI Status: Check Condition (da0:isp1:0:0:6): ILLEGAL REQUEST asc:94,1 (da0:isp1:0:0:6): Vendor Specific ASC (da0:isp1:0:0:6): Unretryable error isp1: 0.0.6 FCP RESPONSE: 0x2 (da0:isp1:0:0:6): Synchronize cache failed, status == 0x59, scsi status == 0x0 I have used FreeBSD 7.1 and FreeBSD 7.2 but both seems to fail. On Storage side I have used Linux and Solaris with/without MPXIO as file system (there is no FreeBSD )
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?75a268721003010102n4e1cc375qdbd8f3b2acb96c40>