From owner-freebsd-stable Wed Mar 31 23:59:36 1999 Delivered-To: freebsd-stable@freebsd.org Received: from labinfo.iet.unipi.it (labinfo.iet.unipi.it [131.114.9.5]) by hub.freebsd.org (Postfix) with SMTP id 115E215CD0 for ; Wed, 31 Mar 1999 23:59:26 -0800 (PST) (envelope-from luigi@labinfo.iet.unipi.it) Received: from localhost (luigi@localhost) by labinfo.iet.unipi.it (8.6.5/8.6.5) id HAA14780; Thu, 1 Apr 1999 07:38:33 +0200 From: Luigi Rizzo Message-Id: <199904010538.HAA14780@labinfo.iet.unipi.it> Subject: Re: vat(1) does not work, audio does To: rvdp@surfnet.nl (Ronald van der Pol) Date: Thu, 1 Apr 1999 07:38:33 +0200 (MET DST) Cc: freebsd-stable@FreeBSD.ORG In-Reply-To: from "Ronald van der Pol" at Mar 31, 99 09:02:15 pm X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 924 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > try set > > > > device pcm0 at isa? port 0x52c tty irq 5 drq 1 flags 0x1N > > > > (where N is the second DMA channel) > > Thanks for your answer! > > I now have: > device pcm0 at isa? port 0x52c tty irq 5 drq 1 flags 0x13 > > which gives: > /kernel: pcm0 at 0x52c irq 5 drq 1 flags 0xa6 13 on isa > /kernel: mss_attach 0 at 0x52c irq 5 dma 1:3 flags 0xa613 > > I have tried a couple of second DMA settings, but with no luck. How > do I determine which second DMA channel to use? W98 (sorry :-) > indicates: > 00 ECP Printer Port > 01 Crystal PnP Audio System CODEC > ^^^ (strange, FreeBSD pnpinfo did not produce output) the chip is PnP-capable, just not used in PnP mode on your system > The errors I get with the settings above are: > failed to output level 74 which makes me a little bit suspicious... what are /dev/dsp* and /dev/audio* and /dev/mixer* in your system ? luigi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message