Date: Wed, 3 Apr 2002 12:55:54 +0200 (CEST) From: Nick Hibma <n_hibma@van-laarhoven.org> To: "raman@hello.to" <raman@hello.to> Cc: "stable@FreeBSD.ORG" <stable@FreeBSD.ORG>, "current@FreeBSD.ORG" <current@FreeBSD.ORG> Subject: Re: Logitech iFeel Optical USB Mouse cannot be attached. Message-ID: <20020403125420.H398-100000@heather.van-laarhoven.org> In-Reply-To: <20011223124355.96775.qmail@web14003.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This looks like an electrical problem. What happens if you connect the mouse directly to the machine, without any hubs? Nick On Sun, 23 Dec 2001, Raman Ng wrote: > Hello all, > > I have already sent a mail about this problem before. > I am a newbie of > FreeBSD. This time I attached the dmesg output and > kernel configuration for > you all. > > I am using Asus A7V mb, Athlon 1.1 GHz CPU, 512 Mb > RAM. Whenever the kernel > boot up, the message device_probe_and_attach: ums0 > attach returned 6. > Details can refer to the attached detail.. This > problem is similar to PR > misc/30373 and there is no one handle it at all. I > have tried FreeBSD 4.4-RELEASE, 4.5-PRERELEASE and > 5.0-CURRENT (which is cvsup a month ago) and the > problem is still persisted. > > I can use this mouse without any problem with Windows > and Linux. Please give > me any clue if I can solve this problem. > > Thanks in advance. > > Regards, > Raman > > --- dmesg output --- > Copyright (c) 1992-2001 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, > 1991, 1992, 1993, 1994 > The Regents of the University of California. > All rights reserved. > FreeBSD 4.5-PRERELEASE #0: Sun Dec 23 01:55:47 HKT > 2001 > root@:/usr/obj/usr/src/sys/STABLE_DEBUG > Timecounter "i8254" frequency 1193182 Hz > CPU: AMD Athlon(tm) Processor (1109.89-MHz 686-class > CPU) > Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 > > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!> > real memory = 536788992 (524208K bytes) > avail memory = 518246400 (506100K bytes) > Preloaded elf kernel "kernel" at 0xc0389000. > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 9 entries at 0xc00f1750 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> > at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <NVidia model 0110 graphics accelerator> at 0.0 > irq 11 > isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on > pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686 ATA66 controller> port > 0xd800-0xd80f at device 4.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f > irq 9 at device 4.2 on pci0 > uhci0: LegSup = 0x0000003b > uhci_run: setting run=0 > uhci_run: done cmd=0x80 sts=0x20 > uhci_run: setting run=1 > uhci_run: done cmd=0x81 sts=0x0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, > addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f > irq 9 at device 4.3 on pci0 > uhci1: LegSup = 0x00000010 > uhci_run: setting run=0 > uhci_run: done cmd=0x80 sts=0x20 > uhci_run: setting run=1 > uhci_run: done cmd=0x81 sts=0x0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, > addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci_device_request: not done, ii=0xc104f680 > uhub2: ALCOR Generic USB Hub, class 9/0, rev > 1.10/1.00, addr 2 > uhub2: 4 ports with 4 removable, self powered > uhci_device_intr_transfer: not done, ii=0xc104f620 > uhci_waitintr: timeout > uhci_idone: error, addr=3, endpt=0x00, status > 0x500000<BABBLE,STALLED> > uhci_waitintr: timeout > usbd_transfer_cb: short transfer 0<1 > uhci_waitintr: timeout > usbd_transfer_cb: short transfer 0<1 > ums0: Logitech, Inc. iFeel Mouse, rev 1.00/1.01, addr > 3, iclass 3/1 > uhci_waitintr: timeout > usbd_transfer_cb: short transfer 0<74 > device_probe_and_attach: ums0 attach returned 6 > uhci_waitintr: timeout > usbd_transfer_cb: short transfer 0<1 > uhci_waitintr: timeout > usbd_transfer_cb: short transfer 0<1 > uhci_waitintr: timeout > usbd_transfer_cb: short transfer 0<4 > uhci_waitintr: timeout > usbd_transfer_cb: short transfer 0<4 > chip1: <VIA 82C686 ACPI interface> at device 4.4 on > pci0 > rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff > mem 0xd5800000-0xd58000ff irq 9 at device 9.0 on pci0 > rl0: Ethernet address: 00:50:ff:60:0b:b8 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, > 100baseTX-FDX, auto > pcm0: <Creative EMU10K1> port 0xa000-0xa01f irq 5 at > device 10.0 on pci0 > pci0: <unknown card> (vendor=0x104c, dev=0x8020) at > 13.0 irq 9 > atapci1: <Promise ATA100 controller> port > 0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 > mem 0xd4000000-0xd401ffff irq 10 at device 17.0 > on pci0 > ata2: at 0x9400 on atapci1 > ata3: at 0x8800 on atapci1 > orm0: <Option ROMs> at iomem > 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd27ff on > isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 > irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port > 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem > 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on > isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in > COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > plip0: <PLIP network interface> on ppbus0 > ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at > ata2-master UDMA100 > ad6: 57241MB <ST360021A> [116301/16/63] at ata3-master > UDMA100 > acd0: DVD-ROM <MATSHITADVD-ROM SR-8586> at ata0-master > using PIO4 > acd1: CD-RW <PLEXTOR CD-R PX-W1610A> at ata1-master > using PIO4 > Mounting root from ufs:/dev/ad4s2a > --- dmesg end --- > > --- kernel config (For FreeBSD 4.5-PRERELEASE) --- > machine i386 > #cpu I386_CPU > #cpu I486_CPU > #cpu I586_CPU > cpu I686_CPU > ident STABLE_DEBUG > maxusers 0 > > #makeoptions DEBUG=-g #Build kernel > with gdb(1) debug symbols > > #options MATH_EMULATE #Support for > x87 emulation > options INET > #InterNETworking > options INET6 #IPv6 > communications protocols > options FFS #Berkeley Fast > Filesystem > options FFS_ROOT #FFS usable as > root device [keep this!] > options SOFTUPDATES #Enable FFS > soft updates support > options UFS_DIRHASH #Improve > performance on big directories > options MFS #Memory > Filesystem > options MD_ROOT #MD is a > potential root device > options NFS #Network > Filesystem > options NFS_ROOT #NFS usable as > root device, NFS requiredoptions MSDOSFS > #MSDOS Filesystem > options CD9660 #ISO 9660 > Filesystem > options CD9660_ROOT #CD-ROM usable > as root, CD9660 required > options PROCFS #Process > filesystem > options COMPAT_43 #Compatible > with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Delay (in ms) > before probing SCSI > options UCONSOLE #Allow users > to grab the console > options USERCONFIG #boot -c > editor > options VISUAL_USERCONFIG #visual boot > -c editor > options KTRACE #ktrace(1) > support > options SYSVSHM #SYSV-style > shared memory > options SYSVMSG #SYSV-style > message queues > options SYSVSEM #SYSV-style > semaphores > options P1003_1B #Posix > P1003_1B real-time extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit > bad replies > options KBD_INSTALL_CDEV # install a > CDEV entry in /dev > > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric > MultiProcessor Kernel > #options APIC_IO # Symmetric > (APIC) I/O > > device isa > device eisa > device pci > > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq > 2 > device fd0 at fdc0 drive 0 > #device fd1 at fdc0 drive 1 > # > # If you have a Toshiba Libretto with its Y-E Data > PCMCIA floppy, > # don't use the above line for fdc0 but the following > one: > #device fdc0 > > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk > drives > device atapicd # ATAPI CDROM > drives > device atapifd # ATAPI floppy > drives > #device atapist # ATAPI tape > drives > options ATA_STATIC_ID #Static device > numbering > > # SCSI Controllers > #device ahb # EISA AHA1742 family > #device ahc # AHA2940 and onboard > AIC7xxx devices > #device amd # AMD 53C974 (Tekram > DC-390(T)) > #device isp # Qlogic family > #device ncr # NCR/Symbios Logic > #device sym # NCR/Symbios Logic > (newer chipsets) > #options SYM_SETUP_LP_PROBE_MAP=0x40 > # Allow ncr to attach > legacy NCR devices when > # both sym and ncr are > configured > > #device adv0 at isa? > #device adw > #device bt0 at isa? > #device aha0 at isa? > #device aic0 at isa? > > #device ncv # NCR 53C500 > #device nsp # Workbit Ninja SCSI-3 > #device stg # TMC 18C30/18C50 > > # SCSI peripherals > #device scbus # SCSI bus (required) > #device da # Direct Access > (disks) > #device sa # Sequential Access > (tape etc) > #device cd # CD > #device pass # Passthrough device > (direct SCSI access) > > # RAID controllers interfaced to the SCSI subsystem > #device asr # DPT SmartRAID V, VI > and Adaptec SCSI RAID > #device dpt # DPT Smartcache - See > LINT for options! > #device mly # Mylex > AcceleRAID/eXtremeRAID > > # RAID controllers > #device aac # Adaptec FSA RAID, > Dell PERC2/PERC3 > #device ida # Compaq Smart RAID > #device amr # AMI MegaRAID > #device mlx # Mylex DAC960 family > #device twe # 3ware Escalade > > # atkbdc0 controls both the keyboard and the PS/2 > mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an > SCO console > device sc0 at isa? flags 0x100 > > # Enable this and PCVT_FREEBSD for pcvt vt220 > compatible console driver > #device vt0 at isa? > #options XSERVER # support for > X server on a vt console > #options FAT_CURSOR # start with > block cursor > # If you have a ThinkPAD, uncomment this along with > the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM > keyboards are non-std > > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > device apm0 at nexus? disable flags 0x20 # > Advanced Power Management > # PCCARD (PCMCIA) support > #device card > #device pcic0 at isa? irq 0 port 0x3e0 iomem > 0xd0000 > #device pcic1 at isa? irq 0 port 0x3e2 iomem > 0xd4000 disable > > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags > 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > #device sio2 at isa? disable port IO_COM3 > irq 5 > #device sio3 at isa? disable port IO_COM4 > irq 9 > > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus > (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port > interface device > #device vpo # Requires scbus and > da > > > # PCI Ethernet NICs. > #device de # DEC/Intel DC21x4x > (``Tulip'') > #device txp # 3Com 3cR990 > (``Typhoon'') > #device vx # 3Com 3c590, 3c595 > (``Vortex'') > > # PCI Ethernet NICs that use the common MII bus > controller code. > # NOTE: Be sure to keep the 'device miibus' line in > order to use these NICs! > device miibus # MII bus support > #device dc # DEC/Intel 21143 and > various workalikes > #device fxp # Intel EtherExpress > PRO/100B (82557, 82558) > #device pcn # AMD Am79C97x PCI > 10/100 NICs > device rl # RealTek 8129/8139 > #device sf # Adaptec AIC-6915 > (``Starfire'') > #device sis # Silicon Integrated > Systems SiS 900/SiS 7016 > #device ste # Sundance ST201 > (D-Link DFE-550TX) > #device tl # Texas Instruments > ThunderLAN > #device tx # SMC EtherPower II > (83c170 ``EPIC'') > #device vr # VIA Rhine, Rhine II > #device wb # Winbond W89C840F > #device wx # Intel Gigabit > Ethernet Card (``Wiseman'') > #device xl # 3Com 3c90x > (``Boomerang'', ``Cyclone'') > > # ISA Ethernet NICs. > # 'device ed' requires 'device miibus' > #device ed0 at isa? port 0x280 irq 10 > iomem 0xd8000 > #device ex > #device ep > #device fe0 at isa? port 0x300 > # Xircom Ethernet > #device xe > # PRISM I IEEE 802.11b wireless NIC. > #device awi > # WaveLAN/IEEE 802.11 wireless NICs. Note: the > WaveLAN/IEEE really > # exists only as a PCMCIA device, so there is no ISA > attachment needed > # and resources will always be dynamically assigned by > the pccard code. > #device wi > # Aironet 4500/4800 802.11 wireless NICs. Note: the > declaration below will > # work for PCMCIA and PCI cards, as well as ISA cards > set to ISA PnP > # mode (the factory default). If you set the switches > on your ISA > # card for a manually chosen I/O address and IRQ, you > must specify > # those parameters here. > #device an > # The probe order of these is presently determined by > i386/isa/isa_compat.c. > #device ie0 at isa? port 0x300 irq 10 > iomem 0xd0000 > #device le0 at isa? port 0x300 irq 5 iomem > 0xd0000 > #device lnc0 at isa? port 0x280 irq 10 drq > 0 > #device cs0 at isa? port 0x300 > #device sn0 at isa? port 0x300 irq 10 > > # Pseudo devices - the number indicates how many units > to allocate. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > pseudo-device sl 1 # Kernel SLIP > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet > etc) > pseudo-device md # Memory "disks" > pseudo-device gif # IPv6 and IPv4 > tunneling > pseudo-device faith 1 # IPv6-to-IPv4 > relaying (translation) > > # The `bpf' pseudo-device enables the Berkeley Packet > Filter. > # Be aware of the administrative consequences of > enabling this! > pseudo-device bpf #Berkeley packet > filter > > # USB support > device uhci # UHCI PCI->USB > interface > #device ohci # OHCI PCI->USB > interface > device usb # USB Bus (required) > #device ugen # Generic > #device uhid # "Human Interface > Devices" > #device ukbd # Keyboard > #device ulpt # Printer > #device umass # Disks/Mass storage - > Requires scbus and da > device ums # Mouse > #device uscanner # Scanners > #device urio # Diamond Rio MP3 > Player > # USB Ethernet, requires mii > #device aue # ADMtek USB ethernet > #device cue # CATC USB ethernet > #device kue # Kawasaki LSI USB > ethernet > > device pcm > > options USB_DEBUG > options UMS_DEBUG > options UHCI_DEBUG > options DIAGNOSTIC > --- kernel config end --- > > __________________________________________________ > Do You Yahoo!? > Send your FREE holiday greetings online! > http://greetings.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > > -- n_hibma@van-laarhoven.org http://www.van-laarhoven.org/ n_hibma@FreeBSD.org http://www.etla.net/~n_hibma/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020403125420.H398-100000>