Date: Tue, 5 Jul 2005 08:29:25 GMT From: Krzysztof Kowalik <kkowalik+pr@uci.agh.edu.pl> To: freebsd-gnats-submit@FreeBSD.org Subject: www/82999: Additional information for the A8N-SLI Deluxe entry in the AMD64 supported motherboards Message-ID: <200507050829.j658TPch069602@www.freebsd.org> Resent-Message-ID: <200507050850.j658o5lx036902@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 82999
>Category: www
>Synopsis: Additional information for the A8N-SLI Deluxe entry in the AMD64 supported motherboards
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-www
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: update
>Submitter-Id: current-users
>Arrival-Date: Tue Jul 05 08:50:05 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator: Krzysztof Kowalik
>Release: 6.0-CURRENT (Jun 21 2005)
>Organization:
AGH University of Science and Technology
>Environment:
FreeBSD marvin.domek.lan 6.0-CURRENT FreeBSD 6.0-CURRENT #0: Tue Jun 21 22:01:25 CEST 2005 root@marvin.domek.lan:/usr/src/sys/amd64/compile/MARVIN amd64
>Description:
Vendor: ASUS
Model: A8N-SLI Deluxe
Chipset: nVidia nForce 4 SLI
Issues: Fully functional, secondary on-board (SiI 3114R) RAID controller untested
As an addition to the original report:
* Primary (nForce based) software RAID works (you need post Jun 6 -CURRENT for it - SNAP005, for example; ata-raid.h version 1.34 required),
* sounds works (snd_ich driver),
* secondary on-board (SiI 3114R) RAID controller untested.
% cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <nVidia nForce4> at io 0xd800, 0xdc00 irq 20 bufsz 16384 kld snd_ich (1p/1r/0v channels duplex default)
% dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Tue Jun 21 22:01:25 CEST 2005
root@marvin.domek.lan:/usr/src/sys/amd64/compile/MARVIN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1809.28-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1027616768 (980 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
pci_link0: <ACPI PCI Link LNK1> on acpi0
pci_link1: <ACPI PCI Link LNK2> irq 3 on acpi0
pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNK4> on acpi0
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link5: <ACPI PCI Link LUBA> on acpi0
pci_link6: <ACPI PCI Link LUBB> on acpi0
pci_link7: <ACPI PCI Link LMAC> on acpi0
pci_link8: <ACPI PCI Link LACI> irq 5 on acpi0
pci_link9: <ACPI PCI Link LMCI> on acpi0
pci_link10: <ACPI PCI Link LSMB> on acpi0
pci_link11: <ACPI PCI Link LUB2> on acpi0
pci_link12: <ACPI PCI Link LIDE> on acpi0
pci_link13: <ACPI PCI Link LSID> irq 5 on acpi0
pci_link14: <ACPI PCI Link LFID> irq 11 on acpi0
pci_link15: <ACPI PCI Link LPCA> on acpi0
pci_link16: <ACPI PCI Link APC1> irq 0 on acpi0
pci_link17: <ACPI PCI Link APC2> irq 0 on acpi0
pci_link18: <ACPI PCI Link APC3> irq 0 on acpi0
pci_link19: <ACPI PCI Link APC4> irq 0 on acpi0
pci_link20: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link21: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link22: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link23: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCS> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link29: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link30: <ACPI PCI Link APSJ> irq 0 on acpi0
pci_link31: <ACPI PCI Link APCP> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link24: Unable to choose an IRQ
pci_link29: Unable to choose an IRQ
pci_link30: Unable to choose an IRQ
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xd4003000-0xd4003fff at device 2.0 on pci0
pci_link21: Unable to choose an IRQ
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb00000-0xfeb000ff at device 2.1 on pci0
pci_link27: Unable to choose an IRQ
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pcm0: <nVidia nForce4> port 0xd800-0xd8ff,0xdc00-0xdcff mem 0xd4002000-0xd4002fff irq 20 at device 4.0 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC850 AC97 Codec>
atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce4 SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd400-0xd40f mem 0xd4001000-0xd4001fff irq 21 at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce4 SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc000-0xc00f mem 0xd4000000-0xd4000fff irq 22 at device 8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci_link17: BIOS IRQ 21 for 0.7.INTA is invalid
pci_link18: BIOS IRQ 22 for 0.8.INTA is invalid
pci5: <ACPI PCI bus> on pcib1
pci_link17: Unable to choose an IRQ
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xd3008000-0xd30087ff,0xd3004000-0xd3007fff at device 11.0 on pci5
pci_link16: Unable to choose an IRQ
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:22:24:f4
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:22:24:f4
fwe0: Ethernet address: 02:11:d8:22:24:f4
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
skc0: <Marvell Gigabit Ethernet> port 0xa000-0xa0ff mem 0xd3000000-0xd3003fff irq 17 at device 12.0 on pci5
skc0: interrupt moderation is 100 us
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:d8:c4:64:ce
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci1: <ACPI PCI bus> on pcib5
pci_link18: Unable to choose an IRQ
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhid0: American Power Conversion Back-UPS CS 500 FW:808.q3.I USB FW:q3, rev 1.10/0.06, addr 2, iclass 3/0
Timecounter "TSC" frequency 1809280980 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <LITE-ON DVDRW SOHW-1633S/BRS6> at ata0-master UDMA33
acd1: DVDROM <LITE-ON DVD SOHD-16P9S/FS09> at ata1-master UDMA33
ad4: 190782MB <Seagate ST3200826AS 3.03> at ata2-master SATA150
ad8: 70911MB <WDC WD740GD-00FLA2 31.08F31> at ata4-master SATA150
ad10: 70911MB <WDC WD740GD-00FLA2 31.08F31> at ata5-master SATA150
ATA PseudoRAID loaded
ar0: 70911MB <nVidia MediaShield RAID1> status: READY
ar0: disk0 READY (master) using ad8 at ata4-master
ar0: disk1 READY (mirror) using ad10 at ata5-master
Trying to mount root from ufs:/dev/ar0s1a
---
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200507050829.j658TPch069602>