Date: Wed, 6 Jul 2005 00:20:15 GMT From: Hans Mathre <hma3.gm@gmail.com> To: freebsd-amd64@FreeBSD.org Subject: Re: amd64/81089: FreeBSD 5.4 released version can not use Broadcom NIC 5704 Message-ID: <200507060020.j660KF63048867@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR amd64/81089; it has been noted by GNATS.
From: Hans Mathre <hma3.gm@gmail.com>
To: bug-followup@FreeBSD.org, fishhong@nexcom.com.tw
Cc:
Subject: Re: amd64/81089: FreeBSD 5.4 released version can not use Broadcom NIC 5704
Date: Tue, 5 Jul 2005 20:13:46 -0400
I'm having the same troubles after updating a Dual AMD64 system to 5.4
stable from 5.3. Looking at your patch, I'm seeing that there is a
diffrence between the if_bge.c files, mine is...
__FBSDID("$FreeBSD: src/sys/dev/bge/if_bge.c,v 1.72.2.13 2005/05/22
03:17:49 silby Exp $");
where yours was...
__FBSDID("$FreeBSD: src/sys/dev/bge/if_bge.c,v 1.72.2.10.2.1
2005/05/06 00:38:51 dwhite Exp $");
So when I tried to apply the patch, I came up with this error...
../../../dev/bge/if_bge.c: In function `bge_ifmedia_upd':
../../../dev/bge/if_bge.c:3434: warning: 'sc' might be used uninitialized i=
n thi
s function
*** Error code 1
I'm at a loss for what to do, so any help would be great. Here is my dmesg.=
..
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Tue Jul 5 16:03:19 EDT 2005
root@serverbdb.hogue-school:/usr/src/sys/amd64/compile/DUALAMD64_02
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 248 (2191.06-MHz K8-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0xf5a Stepping =3D 10
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CM
OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=3D0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory =3D 5368709120 (5120 MB)
avail memory =3D 4116946944 (3926 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
netsmb_dev: loaded
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pci0: <base peripheral, interrupt controller> at device 1.1 (no driver atta=
ched)
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xe400-0xe4ff mem 0xfe980000-0xfe=
98fff
f,0xfe990000-0xfe99ffff irq 29 at device 1.0 on pci2
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xe800-0xe8ff mem
0xfe9e0000-0xfe9effff,0xfe9f0000-0xfe9fffff irq 30 at device 1.1 on
pci2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem
0xfe9a0000-0xfe9affff,0xfe9b0000-0xfe9bffff irq 31 at device 3.0 on
pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:00:1a:19:08:b0
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem
0xfe9c0000-0xfe9cffff,0xfe9d0000-0xfe9dffff irq 28 at device 3.1 on
pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:00:1a:19:08:b1
pci0: <base peripheral, interrupt controller> at device 2.1 (no driver atta=
ched)
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib3
ohci0: <OHCI (generic) USB controller> mem 0xfe3fe000-0xfe3fefff irq
19 at device 0.0 on pci1
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe3ff000-0xfe3fffff irq
19 at device 0.1 on pci1
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177=
,0x3f
6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <bridge> at device 7.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp=
i0
sio0: type 16550A, console
orm0: <ISA Option ROM> at iomem 0xc8000-0xcbfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 1.000 msec
acd0: CDROM <SAMSUNG CD-ROM SN-124/S003> at ata1-slave PIO4
Waiting 15 seconds for SCSI devices to settle
ses0 at mpt1 bus 0 target 8 lun 0
ses0: <SDR GEM318P 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
da0 at mpt1 bus 0 target 0 lun 0
da0: <FUJITSU MAP3735NC 0108> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da0: 70103MB (143571316 512 byte sectors: 255H 63S/T 8936C)
da1 at mpt1 bus 0 target 1 lun 0
da1: <FUJITSU MAP3735NC 0108> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da1: 70103MB (143571316 512 byte sectors: 255H 63S/T 8936C)
Mounting root from ufs:/dev/gvinum/root
-hma3
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200507060020.j660KF63048867>