Date: Tue, 9 Jan 1996 17:00:28 -0200 (EDT) From: Joaquim Humberto Marques Mota <joaquim@oberon.cnpq.br> To: questions@FreeBSD.ORG Subject: Help with this New Kernel Message-ID: <Pine.BSF.3.91.960109165706.3281A-200000@oberon.cnpq.br>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi Could you help me with this new Kernel?! I try to make and something goes wrong. I don't have none SCSI device and the only strange thing a had is a BusMouse from Logitech (MOUSEMAN) with IRQ 3 and a Ethernet Card (NE2000 compatible) in IRQ 5. Thanxs in Advance. Joaquim Humberto Newbie in FreeBSD [-- Attachment #2 --] # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # $Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $ # machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" ident KOBERON maxusers 10 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options "SCSI_DELAY=5" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options SYSVSHM options SYSVSEM options SYSVMSG config kernel root on wd0 controller isa0 # controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 # options ATAPI #Enable ATAPI support for IDE bus # device wcd0 #IDE CD-ROM # controller ncr0 # controller ahc0 # controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr # controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr # controller ahc1 at isa? bio irq ? vector ahcintr # controller ahb0 at isa? bio irq ? vector ahbintr # controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr # controller aic0 at isa? port 0x340 bio irq 11 vector aicintr # controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr # controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr # controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr # controller scbus0 # device sd0 # device st0 # device cd0 #Only need one of these, the code dynamically grows # device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr # device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr # device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr # controller matcd0 at isa? port 0x230 bio # device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 # device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 6 vector siointr device sio2 at isa? port "IO_COM3" tty irq 8 vector siointr device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty device lpt2 at isa? port? tty device mse0 at isa? port 0x23c tty irq 3 vector mseintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. # device de0 device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr # device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr # device ep0 at isa? port 0x300 net irq 10 vector epintr # device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr # device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr # device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr # device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr # device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr # device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr device pca0 at isa? port "IO_TIMER1" tty pseudo-device loop pseudo-device ether pseudo-device log # pseudo-device sl 1 # ijppp uses tun instead of ppp device pseudo-device ppp 2 pseudo-device tun 2 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's pseudo-device speaker
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960109165706.3281A-200000>