From owner-freebsd-alpha Mon Jul 24 7:50: 0 2000 Delivered-To: freebsd-alpha@freebsd.org Received: from charon.npc.net (charon.finall.com [199.15.61.3]) by hub.freebsd.org (Postfix) with ESMTP id B0A6037BA91; Mon, 24 Jul 2000 07:49:33 -0700 (PDT) (envelope-from mjung@npc.net) Received: from exchange1.npc.net ([10.0.157.36]) by charon.npc.net (8.10.2/8.10.2) with ESMTP id e6OEnWe92975; Mon, 24 Jul 2000 10:49:32 -0400 (EDT) Received: by EXCHANGE1 with Internet Mail Service (5.5.2650.21) id ; Mon, 24 Jul 2000 10:49:36 -0400 Message-ID: <921763828F4BD4118D7D00805FEDF35810C5B5@EXCHANGE1> From: "Jung, Michael" To: "'Mike Smith'" Cc: "'freebsd-alpha@FreeBSD.ORG'" Subject: RE: Booting from Raid Date: Mon, 24 Jul 2000 10:49:35 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org It appears that the mlx driver is just not apart of the RC2 kernel. Here is the data on the box - once I installed on dka0 and rebuilt a kernel with the mlx driver it recognized the mylex card but had errors - see below --mikej Michael Jung mjung@npc.net Digital Equipment Corporation AlphaServer 2100 4/233 SRM Console V5.3-2 VMS Palcode V5.56-7, OSF Palcode V1.45-12 Component Status Module ID Slot Option Hose0,Bus0, Pci 0 DecChip 21040-AA eq0.0.0.0 08-00-2B-E5-14-5C 1 NCR 53C810 pka0.7.0.1.0 SCSI Bus ID 7 dka0.0.0.1.0 RZ29L-AS dka600.6.0.1.0 RRD43 2 Intel 82375 Bridge to Hose 1,EISA 6 Mylex dra.0.0.6.0 dra0.0.0.6.0 5 member RAID 5 dra1.0.0.6.0 3 member RAID 5 Unrecognized boot flag '0'. Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-20000719-RC #0: Mon Jul 24 10:32:03 EDT 2000 mikej@alpha2.npc.net:/usr/src/sys/compile/alpha2 DEC AlphaServer 2100 AlphaServer 2100 4/233, 233MHz 8192 byte page size, 2 processors. CPU: EV45 (21064A) major=6 minor=2 OSF PAL rev: 0x4000c0002012d real memory = 668917760 (653240K bytes) Physical memory chunk(s): 0x00768000 - 0x27fe5fff, 663216128 bytes (80959 pages) avail memory = 643719168 (628632K bytes) Preloaded elf kernel "kernel.new" at 0xfffffc000074c000. md0: Malloc disk Creating DISK md0 found-> vendor=0x1011, dev=0x0002, revid=0x23 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=34 map[10]: type 1, range 32, base 00010100, size 7 map[14]: type 1, range 32, base 81004100, size 7 found-> vendor=0x1000, dev=0x0001, revid=0x02 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=33 map[10]: type 1, range 32, base 00010000, size 8 map[14]: type 1, range 32, base 81004000, size 8 found-> vendor=0x8086, dev=0x0482, revid=0x04 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1069, dev=0x0001, revid=0x00 class=01-04-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=32 map[10]: type 1, range 32, base 00010180, size 7 found-> vendor=0x7246, dev=0x0000, revid=0x00 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 pci0: on pcib0 de0: port 0x10100-0x1017f mem 0x81004100-0x8100417f irq 34 at device 0.0 on pci0 de0: interrupting at T2 irq 34 de0: DEC 21040 [10Mb/s] pass 2.3 de0: address 08:00:2b:e5:14:5c bpf: de0 attached sym0: <810> port 0x10000-0x100ff mem 0x81004000-0x810040ff irq 33 at device 1.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00 sym0: Delay (GEN=11): 263 msec, 33795 KHz sym0: Delay (GEN=11): 262 msec, 33924 KHz sym0: Delay (GEN=11): 262 msec, 33924 KHz sym0: interrupting at T2 irq 33 isab0: at device 2.0 on pci0 isa0: on isab0 mlx0: port 0x10180-0x101ff irq 32 at device 6.0 on pci0 mlx0: couldn't allocate mailbox window device_probe_and_attach: mlx0 attach returned 6 pci0: (vendor=0x7246, dev=0x0000) at 15.0 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at T2 irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0003 atkbd: keyboard ID 0x83ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: interrupting at T2 irq 1 psm0: current command byte:0043 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 90 03 3c psm: status 90 03 3c psm: status 90 03 3c psm: data 08 00 00 psm: status 00 00 0a psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: interrupting at T2 irq 12 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) mcclock0: at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 233343215 Hz (firmware 233100233 Hz) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio0: interrupting at T2 irq 4 sio1: reserved for low-level i/o ppc0: using normal I/O port range ppc0: SPP ppc0: at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Polled port plip0: cannot reserve interrupt, failed. ppc0: interrupting at T2 irq 7 isa_probe_children: probing PnP devices Timecounter "alpha" frequency 233343215 Hz bpf: sl0 attached bpf: ppp0 attached bpf: lo0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: faith0 attached Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. de0: enabling 10baseT port (probe6:sym0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe6:sym0:0:6:0): ILLEGAL REQUEST asc:24,0 (probe6:sym0:0:6:0): Invalid field in CDB sks:c8,1 Creating DISK da0 Creating DISK cd0 pass0 at sym0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number JDM7494509WKM3 pass0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled pass1 at sym0 bus 0 target 6 lun 0 pass1: Removable CD-ROM SCSI-2 device pass1: 4.166MB/s transfers (4.166MHz, offset 8) da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number JDM7494509WKM3 da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) cd0 at sym0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 4.166MB/s transfers (4.166MHz, offset 8) cd0: cd present [316732 x 512 byte records] Mounting root from ufs:/dev/da0a da0: invalid primary partition table: no magic start_init: trying /sbin/init -----Original Message----- From: owner-freebsd-alpha@FreeBSD.ORG [mailto:owner-freebsd-alpha@FreeBSD.ORG]On Behalf Of Mike Smith Sent: Friday, July 21, 2000 8:20 PM To: Michael Jung Cc: freebsd-alpha@FreeBSD.ORG Subject: Re: Booting from Raid > > Ok I admit I've probably not looked hard enough > but it seems that I read recently that you should > be able to boot from DAC960 PCI raid partitions > under FreeBSD-Alpha... > > Shortly before I left work today we started to > load the rc2 iso on a 2100 and it did not > recognize the raid partition.. Can you provide some more details? The output of "show conf" relevant to this card would be a start, as well as the FreeBSD kernel probe messages. You may also have to load the 'mlx' module (this requires booting from floppies, irritatingly) since I get the sneaking suspicion it's not in the GENERIC kernel for Alpha systems. Space in that kernel is *really* tight. -- ... every activity meets with opposition, everyone who acts has his rivals and unfortunately opponents also. But not because people want to be opponents, rather because the tasks and relationships force people to take different points of view. [Dr. Fritz Todt] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message